View Full Version : Johnny Lightning Performance
SGT_MERC
10-11-2011, 11:44 AM
Just got back from having my 05 GM tuned at JLP in New Providence, Pa. I love it. At the back tires, Hp was 240 and Torque was 270. With the Nitrous: HP was 305 and Torque was 387. I'm happy.
ctrlraven
10-11-2011, 11:55 AM
Dry or wet nitrous kit?
SGT_MERC
10-11-2011, 12:03 PM
Dry or wet nitrous kit?
Wet...
That's what she said. LOL
SGT_MERC
10-11-2011, 12:05 PM
Sweet!!! :burn:
When are you getting into Hershey Jake. I'll be able to visit from time to time, but we have alot of things happening this weekend. I need to look at the itinerary to see when everyone will be around.
F8LBITEva
10-11-2011, 05:59 PM
congrats! Nice numbers
Bradley G
10-11-2011, 06:23 PM
you will be able to join Marauderville in record time
SGT_MERC
10-11-2011, 06:33 PM
you will be able to join Marauderville in record time
especially since I live 40 minutes...no wait...now, 25 minutes away. HaHa
SGT_MERC
10-11-2011, 06:35 PM
Here is what I've done so far:
Cold air intake, under drive pullies, mezier electric water pump, P-51 intake, 230 Amp alternator, battery relocate to the trunk w/ 2 gauge wire from the alt to the trunk and 1 gauge wire wire from the trunk to the engine compartment to an isolated post on passenger side fender well, 4.10 gears with a true trac posi (soon to be replaced by a set of 4.56's with an auburn posi), Aluminum balanced drive shaft w/ heavy duty u-joints, windage tray, modified 7 quart oil pan, Nitrous express wet system with pressure sensing bottle heater, remote bottle opener and purge valve, OBX long tube headers, high flow cats, 2.5" exhaust from headers to the rear bumper with flow masters and 4" no-res tips(I cut out the OBX x-pipe and welded in an h-pipe), Addco front and rear sway bars, Sparta upper and lower control arms, Sparta watts-link bars, Mach 1 chin spoiler, Marauder trunk lip spoiler, Marauder corner lights, Marauder head lights, marauder tail lights with center trunk facia, 18x8.5" wheels w/ Nitto 255/45-18's up front and 18x9.5" wheels w/ Nitto 295/45-18's on the back. Stock fuel pump, rails and injectors and tinted windows. Fuel pump was at 72% on the nitrous pull. I am very proud to say I have done everything my self, except modifying the oil pan and the exhaust, with what I am very grateful for, advice from members here. I have not been in a forum as helpful and hilarious as this one. Thank You, everyone, for accepting me in, even though I don't have a Marauder yet.
Bradley G
10-12-2011, 04:22 AM
Ok you are allowed to MV, but no beating on stockers while you're there!:P
SGT_MERC
10-12-2011, 04:55 AM
Ok you are allowed to MV, but no beating on stockers while you're there!:P
I just hope when I get up there this morning, it's not to late to pay my registration.
Bradley G
10-12-2011, 07:33 AM
You'll be fine:)
I just hope when I get up there this morning, it's not to late to pay my registration.
71cyclone
10-12-2011, 09:33 PM
'all here and accounted for sir ' [ im impressed sarge ]
SGT_MERC
10-13-2011, 03:40 AM
Here is my dyno run.
http://s1180.photobucket.com/albums/x417/SGT_MERC/?action=view¤t=2011-10-11_10-51-56_873.mp4
http://s1180.photobucket.com/albums/x417/SGT_MERC/?action=view¤t=2011-10-11_10-55-23_729.mp4
http://i1180.photobucket.com/albums/x417/SGT_MERC/1318283473566.jpg
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.