Blower options for Trilogy guys?

[Bradley G]

What other options besides the Eaton fits on a Trilogy's '03-'04 Cobra lower manifold?

[RacerX]

03/04 Cobra Lysholm or Whipple kit.

[mcgyver59]

The gt500 blowers with the adapter made by JamesHell on modularfords

[DEFYANT]

Subscribing...

[RacerX]

Well! That is interesting!

http://i1099.photobucket.com/albums/g392/cmcharle/m1221.jpg
http://i1099.photobucket.com/albums/g392/cmcharle/m1223.jpg
http://www.modularfords.com/forums/attachments/f17/79989d1303168152-m122-gt500-blower-terminator-beforecut.jpg
http://www.modularfords.com/forums/attachments/f17/80193d1304292764-m122-gt500-blower-terminator-enginepic1.jpg
http://img.photobucket.com/albums/v137/46cougrrr/IMG_20110517_005256.jpg
http://img.photobucket.com/albums/v137/46cougrrr/IMG_20110517_005215.jpg

[Blown3.8]

If you are using the IC from the trilogy kit you will need to fill and drill some holes to mount it to the eaton, whipple, KB blower plate. I suggest selling the IC and lower manifold with the trilogy m112 and buying an IC and lower manifold from a cobra and getting the OEM gasket for the blower plate to the manifold, much easier to remove/clean if you have to take the blower off.

[DOOM]

I want a trilogy TWIN SCREW!!!

[Cobra25]

I want a trilogy TWIN SCREW!!! I second that !!!!

[mcgyver59]

Why isnt anyone ordering the compressor with the correct snout length, then make a simple adapter plate?
Http://www.lysholm.us/_2300ax.php

[RacerX]

Why isnt anyone ordering the compressor with the correct snout length, then make a simple adapter plate?
Http://www.lysholm.us/_2300ax.php
Find a price on the right pieces from them and you may have your answer... ;)

[Spectragod]

If a 3300 would bolt onto my blower plate, I'd gladly dump my 2300 T.S......

[hotford]

Doesn't the 3300 from vortech come with its own blower plate??
YUP it does........................

http://www.lysholm.us/cobra_03-04.php

[hotford]

If you are using the IC from the trilogy kit you will need to fill and drill some holes to mount it to the eaton, whipple, KB blower plate. I suggest selling the IC and lower manifold with the trilogy m112 and buying an IC and lower manifold from a cobra and getting the OEM gasket for the blower plate to the manifold, much easier to remove/clean if you have to take the blower off.

I thought the lower manifold and innercooler were the same????? they have the same part # as the factory 03-04 cobra, the trilogy kit uses its own midplate to mount to the lower manifold,If you use a 2.3 whipple it comes with its own midplate that mounts to the lower manifold,all you then need is a metco hub and ring as the two will line up.

This is the route I'm going with as Trilogy T/S is discontined as well as the standard kit.

[massacre]

That guy JamesHell has a really nice car. Lot of custom stuff done to it.

[guspech750]

Eaton TVS.


---
- Sent from my iPhone
Eaton Swap + 4.10's = Wreeeeeeeeeedom!!

[BODYMAN]

Eaton TVS.


---
- Sent from my iPhone
Eaton Swap + 4.10's = Wreeeeeeeeeedom!!

I second this, cant beleive no one has looked into this option! They have been putting down great numbers with this on there 2.3 TVS project 03 Cobra!

[Blown3.8]

I thought the lower manifold and innercooler were the same????? they have the same part # as the factory 03-04 cobra, the trilogy kit uses its own midplate to mount to the lower manifold,If you use a 2.3 whipple it comes with its own midplate that mounts to the lower manifold,all you then need is a metco hub and ring as the two will line up.

This is the route I'm going with as Trilogy T/S is discontined as well as the standard kit.

It is the same part numbers but they have been modified by Trilogy. The trilogy M112 sits down and back compared to the cobra stuff. So the IC is drilled to have extra holes to mount the blower.

And there is a hump in the intake between the #6 and #7 cylinders that trilogy ground off. This is not as much of a big deal. Can see hump in this pic.
http://i1084.photobucket.com/albums/j414/03sport007/photo-25.jpg

[boatmangc]

Has anyone done the M122 swap on one of our cars?
I am intrigued by the work on the modular fords site and it looks too good to be true.
I found a 500 mile used GT500 blower on CL for $400
$600 for JamesHell kit
$5/600 for the Posiperformance work.

About 1500 and it should be GTG.

I spent all day reading the 100 ish page thread on modularfords and I am very intrigued.

[RacerX]

http://i13.photobucket.com/albums/a282/senkak/IMG_0210.jpg
http://i13.photobucket.com/albums/a282/senkak/vmptvs32bbk65sat.jpg

[BirchMarauder]

Who is this JamesHell? I googled it but didn't find anything.

[RacerX]

Who is this JamesHell? I googled it but didn't find anything.
Right here: http://www.modularfords.com/forums/f17/tvs-blower-my-cobra-175324/ :beer:

[mgmsleeper]

So this m122 swap is cheaper then eaton m112?

[SC Cheesehead]

So this m122 swap is cheaper then eaton m112?

No

---------------

[99SVT]

Here's my thoughts to a mild/simple Trilogy upgrade:

Stock Trilogy dimensions,
http://www.magnusonproducts.com/images/mp112draw.jpg

1.9L TVS dimensions, mounting holes for the Trilogy adaptor plate are the same, the only differences are the rear inlet shape, overall height, width, and bypass location
http://www.magnusonproducts.com/images/mp1900/mp1900drawing.jpg
http://www.magnusonproducts.com/images/mp1900/mp6thgenbypass.jpg

[kariamack]

http://powerworksperformance.com/powertrain_updates.. This link make help a bit I just think we may need to find someone who can make the intake elbow out of sheet metal

[boatmangc]

Is the 1.9 TVS available?
How much and where?

[LANDY]

Is the 1.9 TVS available?
How much and where?
Magnacharger makes them

[ta3mo3]

I want a trilogy TWIN SCREW!!!


i'll take yours