Are these worth anything in our cars?

[Baconbit]

http://www.ebay.com/itm/110761404152?ssPageName=STRK:M EWAX:IT&_trksid=p3984.m1423.l2649

Just curious if these are worth buying to install?

[dohc324ci]

Stick with stock cams or 98 Cobra cams. I've done both Ford GT (GT40) and comp cams and are in the 20-25hp range. If doing as part of a build then yes but cams by itself arent worth it IMO unless you are able to do the work yourself.

[71cyclone]

Good- INFO TO KNOW [ LOGGED IT IN TO MY NOTES ] DOHC 324

[RacerX]

Mach 1, 03/04 Cobra, Aviator, Marauder, Navigator
Intake: 184 deg @ .050/.397" lift Exhaust: 196 deg @ .050/.397" lift
114 LCs

96-98 Cobra
Intake: 204 deg @.050/ .397 lift
Exhaust: 196 deg @.050/.397 lift
114/114 LCs (106/110 optimal)

99/01 Cobra
Intake: 200 deg @.050/.397 lift
Exhaust: 196 deg @.050/.397 lift
114 LCs

FR500 (M-6550-T46)
intake: 212 deg @.050 /.472 lift
exhaust: 208 deg @.050 /.472 lift
109 LCs

GT Cams:
Int: 197 duration .466 lift
Exh: 197 duration .456 lift
LCs as 114/114

Cobra R specs:
Intake: .515'' lift 212 deg dur @.050
Exhaust: .468'' lift 212 deg dur @.050

[BigCars4Ever]

does .450 - .470 lift need special springs?

[MMBLUE]

Mach 1, 03/04 Cobra, Aviator, Marauder, Navigator
Intake: 184 deg @ .050/.397" lift Exhaust: 196 deg @ .050/.397" lift
114 LCs

96-98 Cobra
Intake: 204 deg @.050/ .397 lift
Exhaust: 196 deg @.050/.397 lift
114/114 LCs (106/110 optimal)

99/01 Cobra
Intake: 200 deg @.050/.397 lift
Exhaust: 196 deg @.050/.397 lift
114 LCs

FR500 (M-6550-T46)
intake: 212 deg @.050 /.472 lift
exhaust: 208 deg @.050 /.472 lift
109 LCs

GT Cams:
Int: 197 duration .466 lift
Exh: 197 duration .456 lift
LCs as 114/114

Cobra R specs:
Intake: .515'' lift 212 deg dur @.050
Exhaust: .468'' lift 212 deg dur @.050

Thanks for the info Bill, I could've used that over on my cam swap thread.

[na svt]

GT500 cams are the exact same cams that are in Maraders (and Mach 1, Avaitors and Navigators).

The GT (not GT500) cams will add 1/2 the power than cobra intake cams but they cost more than twice as much.

Properly spec'd cams can add 40rwhp and not kill tq.

[Baconbit]

How long does it take to put a set of cobra intake cams in start to finish?

[na svt]

How long does it take to put a set of cobra intake cams in start to finish?
4 hours without degreeing and 6-8 with degreeing.

[Baconbit]

4 hours without degreeing and 6-8 with degreeing.

Do you have any sets available?

[na svt]

Do you have any sets available?
I have none right now but next week I will have 6 pair (12 cams) of Ford cams from one an early 4v development programs. I'm unsure of their duration but will have them checked by the end of the weekend.

[Baconbit]

Awesome, let me know what you think of them or if you come across cobra cams because I would like to get this done this winter. Also what would need done in the tune if this is done?

[na svt]

Also what would need done in the tune if this is done?
cobra cams don't require a tune if the car already has one.