Trilogy Guys and Gals Come on In

[martyo]

What are the pulley options available for the Trilogy blower?

What boost can you expect from each?

What is the availability of the various pulleys?

Thanks!

[Pops]

Marty send a PM to Blown 3.8. Chris is Shermans son and he will have a lot of answers for you!

[martyo]

Marty send a PM to Blown 3.8. Chris is Shermans son and he will have a lot of answers for you!

Sounds like a plan!

[DOOM]

Marty I'm running a 3.0 blower pulley and a 4# cobra crank pulley.

Making 15-16 psi and 500RWHP!

[martyo]

Marty I'm running a 3.0 blower pulley and a 4# cobra crank pulley.

Making 15-16 psi and 500RWHP!

I want mine to be conservative.

Are there any 3.2 pulleys around?

[DOOM]

I want mine to be conservative.

Are there any 3.2 pulleys around?

Hey Marty check these guys out!

http://www.aspracing.com/order.htm

A few trilogy guys have got pulleys from here.

[martyo]

Hey Marty check these guys out!

http://www.aspracing.com/order.htm

A few trilogy guys have got pulleys from here.

Bad link!!!

[kariamack]

Ill have a 3.2 pulley for sell pretty soon

[martyo]

Ill have a 3.2 pulley for sell pretty soon

What direction are you going and what will you want for the 3.2?

[sweetair]

I went from a 3.4 to a 3.0

I was at 10 lbs boost now 12.5 lbs boost.

404 RWHP 440 RWTQ with the 3.0

I also have a K&N CAI.

Stock motor, exhaust, tranny and gears.

[martyo]

I went from a 3.4 to a 3.0

I was at 10 lbs boost now 12.5 lbs boost.

404 RWHP 440 RWTQ with the 3.0

I also have a K&N CAI.

Stock motor, exhaust, tranny and gears.

Those are numbers I like!

[Bradley G]

I'm @ 2.8" makes 15# of boost till 5000 rpm. pulls till 6500 , dynoed 418/416 no timing added in the tune.

[DEFYANT]

Marty, get the 3.0, full exhaust and CAI and dont look back. See my sig links for mods.

[martyo]

Marty, get the 3.0, full exhaust and CAI and dont look back. See my sig links for mods.

That's what it has.

How are the IATs?

[DOOM]

Marty, get the 3.0, full exhaust and CAI and dont look back. See my sig links for mods.

Thats what I did.

[DEFYANT]

That's what it has.

How are the IATs?

Despite all the controversy, my Trilogy is "stock", meaning I never did the IAT mod. Been running long and hard since 2005 with zero problems.

[Spectragod]

I'm only making 12.5-13 lbs of boost, with stock rear & H pipe, making 521 RWHP 526 RWTQ....

[justbob]

I have had the 3.4 at 9.5 boost and currently have a 3.2 on it, before headers and exhaust 11.5 boost/12.5 winter.

Stock block 445/431

I also have a 2.8 for when my cobra block goes in.

This post is rated E for everyone.

[boatmangc]

I have the 3,0 with cobra shorties and 2.5 midpipes.
Posi ported blower, double thick H/E and a larger I/C resevoir. K$N CAI
425/411 IATs run about 130 at 84 degrees outside temperature.
I was at 100 degrees at sshs11 in 58 degree weather

[sailsmen]

http://www.mercurymarauder.net/forums/showthread.php?p=916819#post91 6819

[DOOM]

I'm only making 12.5-13 lbs of boost, with stock rear & H pipe, making 521 RWHP 526 RWTQ....


You dont count! :P

Twinscrew! ;)

[LANDY]

http://www.mercurymarauder.net/forums/showthread.php?p=916819#post91 6819
And your point is?

[DEFYANT]

And your point is?

.....to start trouble. Don't feed the troll. :rolleyes:

[sailsmen]

That's what it has.

How are the IATs?

Answering his question on IATs.

[ROCOB]

It is official.............

[sailsmen]

.....to start trouble. Don't feed the troll. :rolleyes:

My IATs went from 220*+ to 168* to 118*. I shared what I did to drop the IATs on this board. Perhaps I should not have?

Let's not answer questions. Every thing is beautifull. Everything is perfect. Nothing can be improved. Falalalalalal.

[DEFYANT]

Answering his question on IATs.

The question was asked of me, and I answered it. All your trying to do is derail this thread into another debate.

[Spectragod]

You dont count! :P

Twinscrew! ;)

Damn........:depress: :alone:

[sailsmen]

The question was asked of me, and I answered it. All your trying to do is derail this thread into another debate.

You did not answer his question.

[DEFYANT]

My IATs went from 220*+ to 168* to 118*. I shared what I did to drop the IATs on this board. Perhaps I should not have?

Let's not answer questions. Every thing is beautifull. Everything is perfect. Nothing can be improved. Falalalalalal.

I am not saying the mod is not a good one. On the contrary. I'd do it if I had to pull the blower for some reason. Everything is beautiful. Everything is perfect. Everything can be improved.

Posting just a link clearly shows your intentions are not to help. Do you even have a Trilogy?

[sailsmen]

I think his question "IATs" referred to the temps and not the location of the IAT sensor.

S/C a car raises the IAT and the mods he is talking about raises the raised IAT.

Posting a link with IAT info does help. I have a thread about my IATs, hope it helped some members http://www.mercurymarauder.net/forums/showthread.php?t=73919

What are your IATs?

[DEFYANT]

I think his question "IATs" referred to the temps and not the location of the IAT sensor.

S/C a car raises the IAT and the mods he is talking about raises the raised IAT.

Posting a link with IAT info does help. I have a thread about my IATs, hope it helped some members http://www.mercurymarauder.net/forums/showthread.php?t=73919

What are your IATs?

Tread title: Trilogy Guys and Gals Come on In

You came to flame. What else could have brought you in?

[sailsmen]

What exactly is flaming about posting IATs? I have read both threads I have linked and what is flaming in discussing IATs?

[DEFYANT]

What exactly is flaming about posting IATs? I have read both threads I have linked and what is flaming in discussing IATs?

Your comments and opinions are off topic. As are the last 10 posts.

[sailsmen]

I am answering his question and not calling those who are names.

[DEFYANT]

I am answering his question and not calling those who are names.

Do you know what my IATs are? No. You can not answer his question because you lack the necessary information.

Marty did not ask "What are the IATs on a Trilogy Marauder". He was referring to my car when he asked. You know it, I know it, and the rest of the board knows it.

Nice try.

[guspech750]

Oh here we go.

Blah blah blah. Blah blah blah blah. Blahhhhhhhhhh blaaaaaaaaaaah blah blah blah.

But it is entertaining. :)

---
- Sent from my iPhone
Eaton Swap + 4.10's = Wreeeeeeeeeedom!!

[BUCKWHEAT]

I have a custom 3.6" upper & stock lower. After the S/C port job, the car makes 484rwhp at 12.5# boost at WOT. Engine is forged stroker. I don't think I have any belt slip because of the big pulley.

[sailsmen]

Do you know what my IATs are? No. You can not answer his question because you lack the necessary information.

Marty did not ask "What are the IATs on a Trilogy Marauder". He was referring to my car when he asked. You know it, I know it, and the rest of the board knows it.

Nice try.

Apparently you do not know what your IATs are either, because you did not post them.

What I know was Marty was asking a question about IATs on a modded Trilogy that you did not answer.

In the thread I linked there are no deleted posts, not locked by admins and no poster is accusing another poster of flaming or trolling.

I opened this thread because a friend of mine, Mr. D bought a Trilogy based on my rec. I recently introduced another friend of mine, Mr. E who self installed his Trilogy, to Mr. D so we could all do a Trilogy pre-install review. I started a thread about it. Marty being a new vendor I was hoping was offering some products that we could use on Mr. D's Trilogy.

[RacerX]

I have skippy peanut butter and a dog... :banana2:

[J-MAN]

Chunky???????????

[justbob]

Marty, most Trilogy's that I have seen or datalogged run consistantly 30 to 40 degree's above ambient temp with the stock cobra heat exchanger. This is 3.0 to 3.4's not ported. Hope that helps.

This post is rated E for everyone.

[martyo]

Marty, most Trilogy's that I have seen or datalogged run consistantly 30 to 40 degree's above ambient temp with the stock cobra heat exchanger. This is 3.0 to 3.4's not ported. Hope that helps.



I "spoke" to Chris (Blown 3.8) who put the car together for Tony (Speed) and discussed some vital info.

I think we will tune the car with the 3.0 pulley, datalog it and then see where I go from there.

Meanwhile, if someone has a 3.2 they are going to sell, hit me up.

Thanks!!!

[SC Cheesehead]

Marty, do you have a Scangauge or AeroForce Interceptor for the car? Might want to consider adding one to monitor the IAT. I had Jeff install my AeroForce when I had the car down at your place and love it.

FWIW, I'm running a stock upper and 2 lb lower, around 11 lbs boost, 80* or less ambient and the IAT hangs around 100 -105* (that's with a Type 100 FrozenBoost heat exchanger).

[martyo]

Marty, do you have a Scangauge or AeroForce Interceptor for the car? Might want to consider adding one to monitor the IAT. I had Jeff install my AeroForce when I had the car down at your place and love it.

FWIW, I'm running a stock upper and 2 lb lower, around 11 lbs boost, 80* or less ambient and the IAT hangs around 100 -105* (that's with a Type 100 FrozenBoost heat exchanger).

Those are not horrible numbers.

We are debating on getting an Aeroforce.

EDIT: With all the gauges hanging in the car, i am willing to bet my wife will not want to ride in it!!! LOLOLOLOLOL

[Pops]

EDIT: With all the gauges hanging in the car, i am willing to bet my wife will not want to ride in it!!! LOLOLOLOLOL[/QUOTE]

It will not stop Hack and I from going to the mountains in it Marty!;)

[martyo]

It will not stop Hack and I from going to the mountains in it Marty!;)

I figured that!

[SC Cheesehead]

Those are not horrible numbers.

We are debating on getting an Aeroforce.

EDIT: With all the gauges hanging in the car, i am willing to bet my wife will not want to ride in it!!! LOLOLOLOLOL

Now I KNOW your wife and mine MUST be related... ;)

[martyo]

now i know your wife and mine must be related... ;)

lol!

.............

[Baaad GN]

I see no one has discussed the ssj's, very important!