KVR Rotors - what are they

[stevengerard]

What car did the rotors originally come from, the calipers came from a vette

I did plenty of searching this weekend and even called KVR, they don't make the kit and it is old enough no one seems to know. The one thread I found was started by me, it states the calipers and pads are from a 1999 - 2004 Corvette, the rotors look like they came off a 911 or a Cayenne. Does anyone know for sure - I will be needing rotors sooner or later.

[drobin]

I'm in the same suitation myself, and hope we can get some feed back for replacemets pars, etc. Maybe DR may know ????

Donald (drobin)

[stevengerard]

just received an email, if anyone has the original invoice or the box with part numbers KVR may be able to help, but at this point they haven't found anyone who remember what rotors those were.

[jstevens]

I have Baer drilled and slotted. So far, no complaints.

[guspech750]

Wilwoods FTW!!
http://img.tapatalk.com/46e805b2-5cfd-5a1d.jpg


---
- Sent from my iPhone
Eaton Swap + 4.10's = Wreeeeeeeeeedom!!

[stevengerard]

I understand there are other kits out there, but...... replacing the rotors are a cost effective way to braking performance I was more than satisfied with.

[fastblackmerc]

Why don;t you contact theses guys?

http://www.knsbrakes.com/

They are a vendor on the site and they are located about 5 miles from me.

[drobin]

just received an email, if anyone has the original invoice or the box with part numbers KVR may be able to help, but at this point they haven't found anyone who remember what rotors those were.

The KVR part number for rear cross drilled rotor is 54202CD and the pad # is M7835

Still looking for paperwork on front brakes....

Donald (drobin)

[stevengerard]

The KVR part number for rear cross drilled rotor is 54202CD and the pad # is M7835

Still looking for paperwork on front brakes....

Donald (drobin)

Fabulous thanks, I believe the back were basically stock replacements, its the fronts that were custom. But keep digging, if you find that info we can hopefully help ourselves and a few others :beer:

[03mmmonroe]

What car did the rotors originally come from, the calipers came from a vette

I did plenty of searching this weekend and even called KVR, they don't make the kit and it is old enough no one seems to know. The one thread I found was started by me, it states the calipers and pads are from a 1999 - 2004 Corvette, the rotors look like they came off a 911 or a Cayenne. Does anyone know for sure - I will be needing rotors sooner or later.

you have a pm for front rotors.

Russ

[drobin]

I'm still looking so front pad and rotor information so stay tuned.

Donald (drobin)

[FordNut]

The front rotors are unique, and not really very good. Contact KNS on the site for rotors, and contact Baer for hats. The Baer and KNS supplied rotors (from DBA) use the same hat, but the KVR hat is different.