Dtc c1300

[Coupe]

I´ve got a gigantic problem, in an other thread, i posted about it:
My ABS and TC lamps are glow.
When i did a fault analysis with the IDS, i get the DTC C1300.
I perform the instruction steps in accordance the original Ford manual.
After several tests without faults, i replace the complete ABS module with HCU.
Two and a half year ago, i renewed only the module, i reported.
The module and the HCU are brand new but, unfortunately the same fault is present! :mad2: Has somebody experience with this problem? Can anybody help me PLEASE, to find a solution?????? :bows:

BTW: I have a Module and a HCU for sale :o

[Pat]

The dealer has a special scan tool to activate the individual pistons to do a brake system bleed. I believe Motorhead 350 had to have his brakes serviced in this fashion. FWIW.

[Coupe]

unfortunately, in Germany the dealers can´t help!!!

[Coupe]

nobody knows that problem or can tell me all grounds or solving points? may i have to find the fault there

[Coupe]

solved!!!!
the wire from abs module to fuse F106 was defective!!!

[str8pipe]

Where is the wire from module?

Sent from my SM-A515U using Tapatalk