Passenger side PCV grommet

[ctrlraven]

Anyone have a part number for it?

I cleaned mine the other month ago and I guess the O-ring isn't sealing right cause I have some weeping around it and down the valve cover now.

This is just an example picture, where the black arrows are pointing towards. Looking for the whole plastic piece that bolts to the valve cover with the green O-ring that is under it.
http://i73.photobucket.com/albums/i221/dthrose_2/bolts.jpg

[Blackened300a]

Mine was leaking too til I used a little silicone on the O ring. Its been fine since.

I just noticed the nose is smashed over, I was about to ask what was up with your radiator hose.

[sailsmen]

I think there are some other things you should be concnerned about first.

[ctrlraven]

I think there are some other things you should be concnerned about first.
I also said "this is an example picture".

This Is My Engine.
http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash4/402636_2056550631919_178921202 9_1362646_1566783992_n.jpg

[Spectragod]

I drilled and tapped mine, and, cut a relief for the O ring to seal, not exactly stock, but it sure looks nice.


post # 16........

http://www.motorcitymarauders.com/forums/showthread.php?t=12131&page=2

[sailsmen]

Wow, you did a good job of fixing it.;)

[massacre]

post # 16........

http://www.motorcitymarauders.com/forums/showthread.php?t=12131&page=2

:bows::bows::bows::bows::bows: :bows::bows::bows::bows:

Wow.
Your build is incredible.
Absolutely incredible. Good for you Sir, just so amazing and impressive.

[DOOM]

Mine was leaking too til I used a little silicone on the O ring. Its been fine since.

I just noticed the nose is smashed over, I was about to ask what was up with your radiator hose.

That's NOT the Birdman's engine bay. :puke:

[Blackened300a]

That's NOT the Birdman's engine bay. :puke:

No :censor: I read his line that it was a example.

[ctrlraven]

Grrrr, was hoping it was an in stock part but will have to special order it. Hopefully I should have it by tomorrow.

[ctrlraven]

Stopped off at the local Ford dealership near my work, took the parts guy some time to try and find the part number for it. The only part number he could find for it was 2C5Z-6A892-AA, he said if it is not that part then I might be stuck with having to buy a new valve colver.... yeah that's not going to happen. So if it is not that part I may be looking to see if anyone has some spare valve covers and may want to part with the piece I need. The parts guy believe the correct part term for the part is called "Crankcase Ventilation Retainer".

[Blackened300a]

I may have a extra one in my tool box. I'll take a look for it.

[ctrlraven]

I may have a extra one in my tool box. I'll take a look for it.
If you do, let me know! I guess worse case I would just have to pull it off and take the green O-ring to a bunch of places and see if I can find one to match up to the same size.

[ctrlraven]

New part came in and already installed it. This is what the passenger side PCV valve screws and locks into, well this is the underside of it.

The top side of it has the part number on it, I should have looked closer at it with a light but didn't think it would actually have the part number on it. lol

http://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc7/401105_2188717616011_178921202 9_1422228_1872379895_n.jpg

[Talal DTR MM]

Part no. please. Mine was damaged while painting the cam cover.