Any1 near the baltimore area want to install my underdrives

[marauder410]

Any1 near the baltimore area that i can come to and you can install my steeda underdrives for me, i will pay for labor and buy you a beer

[marauder410]

Also need my set of red powder coated valve covers installed

want to run new 2 guage red power wire i got form alternator, power and ground, i think fbm has this mod on his car

if any1 near the area want to give me some assistance will come to whereever you at and pay

thanks alot guys would highly apprciate it

[martyo]

Contact Blown3.8, a member here.

I think he might be able to help you out.

[whitey]

yes, blown 3.8 can do it, he's located i believe in va, but iv'e been told its not far from md--whitey

[fastblackmerc]

Contact Blown3.8, a member here.

I think he might be able to help you out.

I'm just a little further south than Blown3.8.....

[martyo]

I'm just a little further south than Blown3.8.....

And I'm near the equator! :lol:

[RF Overlord]

And I'm near the equator! Is that Georgia cracker-speak for the Mason-Dixon line? ;)

[martyo]

Is that Georgia cracker-speak for the Mason-Dixon line? ;)

The Mason-Dixon line is the Equator. That's how they teach it in school down here!!!

[Zim Hosein]

Also need my set of red powder coated valve covers installed

want to run new 2 guage red power wire i got form alternator, power and ground, i think fbm has this mod on his car

if any1 near the area want to give me some assistance will come to whereever you at and pay

thanks alot guys would highly apprciate it

If I was closer to MD, I'd do the wrench work for some beer that we could both enjoy :beer: , but I'm in NY! :(

On a side note, what is the benefit of your 2 gauge mod if you don't mind me asking marauder410? :confused:

[fastblackmerc]

If I was closer to MD, I'd do the wrench work for some beer that we could both enjoy :beer: , but I'm in NY! :(

On a side note, what is the benefit of your 2 gauge mod if you don't mind me asking marauder410? :confused:
marauder410 is doing what is considered "The Big 3 Wiring Upgrade"

Definition: the "Big Three" upgrade means improving the current capacity of three cables: 1) alternator positive to battery positive, 2) battery negative to chassis, and 3) engine ground to chassis. Some people replace the factory wiring; others add additional cables to the factory wiring.

I removed the factory cables and used 2 & 4 gauge cables.

[Zim Hosein]

marauder410 is doing what is considered "The Big 3 Wiring Upgrade"

Definition: the "Big Three" upgrade means improving the current capacity of three cables: 1) alternator positive to battery positive, 2) battery negative to chassis, and 3) engine ground to chassis. Some people replace the factory wiring; others add additional cables to the factory wiring.

I removed the factory cables and used 2 & 4 gauge cables.

What is the benefit of the "Big Three" upgrade on a stock MM, or is it only recommended for modified MM's? :confused:

Thanks in advance fastblackmerc! :beer: