belt sizes

[breeze]

3.1 upper and 2lb lower what belt sizes do I need.

[guspech750]

Here is my belt. Mine is super tight. But I had to grind my tensioner limit so my tensioner had more movement to get the belt on. So I would guess something slightly longer. But then again. Maybe not. I have no belt slip.

http://img.tapatalk.com/638e1e5c-73ce-c63b.jpg




---
- Sent from my iPhone
Eaton Swap + 4.10's = Wreeeeeeeeeedom!!

[justbob]

How about a 2.8 upper and 4LB lower on a Trilogy? Jake?

[boatmangc]

While we are at it how about a 4 Lb lower with a 3.0 upper.

[clintons4]

While we are at it how about a 4 Lb lower with a 3.0 upper.

IIRC that combo uses a NAPA 525

[guspech750]

How about a 2.8 upper and 4LB lower on a Trilogy? Jake?
Bubs. I think my old new belt will fit your combo. I was accidentally shipped that 4lb lower remember!!

[marauder4.6DOHC]

Do u have the belt number for that 2.8 up and 4lb lower

[RF Overlord]

Mine is super tight. But I had to grind my tensioner limit so my tensioner had more movement to get the belt on. If the belt is that tight, isn't there a concern for increased bearing wear in the snout?

[justbob]

If the belt is that tight, isn't there a concern for increased bearing wear in the snout?

It was only super tight for installing over the pulley Bob. Once on, the tensioner backs off, so basically the snout isn't seeing any more pressure then what it was designed for.

[bugsyc]

Belt size for 3.4 upper..2LB lower????Anyone?

[tdotcv]

Does any one know?


3.1 upper and 2lb lower what belt sizes do I need.