Clearing out some old stuff...

[MrBluGruv]

hey guys, got a few things here that I found from when I had my MM, and it's time to clear it out to get space back in the garage.

While i'm no fan of the "make me an offer" without posting a price, I'm just posting these up here before I decide to take them to the junkyards in a day or so to see what I can get there if nobody wants them here.

tl;dr: if you see something you like, let me know, I'll tell you my asking price and we can work from there. Nothing is too concrete now.

I have:
Ford 3.55 ring and pinion with approximately 97K on them.

two primary cats (the ones right behind the factory manifolds), somewhere between 60-65K on them.

left and right factory Marauder headlamp housings with a fair bit of hazing on them with new bulbs in them (came with the replacement housings I bought, but I had sylvanias before, so I stuck with sylvania instead of the new bulbs that came with the new housings.)

factory Marauder air box and zip tube (I think? basically it's the entire factory intake arm that was replaced with the JLT that I bought.) DEFINITELY needs a new filter though.

This is stuff I am comfortable shipping.

I also have a factory marauder driveshaft if anyone happens to want to pick it up locally or pay me boatloads to figure out how to ship it to them.

I have more bits, but it's realistically only suitable for scrap, basically parts of my old busted transmission and my old axles that had to be replaced during the gear swap for being the notorious "soft axles"



So, all that being said, any interest here before I start calling the local junkyards and scrap metal collectors?

[massacre]

That sucks if you were close I would take your driveshaft off your hands. It's pretty light to ship but definitely awkward and the potential for damage is great.

[yjmud]

how much for the headlights?

[CBT]

How much for the floormats?

[NXSBOB]

How much for the floormats?
I did not see Floor mats listed.

[MrBluGruv]

That sucks if you were close I would take your driveshaft off your hands. It's pretty light to ship but definitely awkward and the potential for damage is great.

Yeh, I kinda wish it were easier, but between the difficulty of shipping such an item plus the fact that the local junkyards don't seem interested in buying just a driveshaft, I really don't see much option other than scrapping it. :/


how much for the headlights?

I want to check shipping, but I'm thinking like $40+shipping costs unless shipping is like nothing.

Would you be able to pay via paypal?

[Black&Gifted]

How much for the floormats?

next in line on floor mats :P

[MrBluGruv]

next in line on floor mats :P

lmao, man guys I didn't even get to enjoy factory floor mats in my MM when I actually owned it, definitely don't have any to sell. :P

[massacre]

Yeh, I kinda wish it were easier, but between the difficulty of shipping such an item plus the fact that the local junkyards don't seem interested in buying just a driveshaft, I really don't see much option other than scrapping it. :/

Scrap aluminum prices are up right now, so you'll probably do OK. :D

[kyleaz2000]

PM Sent on Intake

[SC Cheesehead]

How much for the floormats?


next in line on floor mats :P

RATFARTS!:mad2:

I snooze, I looze...

[Black&Gifted]

i will take pics of the head lights and seriously call seconds if possible.

[kyleaz2000]

I seriously want to snag that intake from you. I'm doing a Vic build and would like that air box and zip tube. Ha

[MrBluGruv]

UPDATE:

Took in all the metal junk parts yesterdat, the driveshaft, and the cats in for scrap yesterday. I had a truck available and didn't want to miss the opportunity.

This leaves the marauder headlights, the intake setup, and the factory 3.55 rear gears for sale.

Currently dibs are on the intake setup and headlights, working on shipping and purchase price for those gentlemen, 3.55s are totally up for grabs and will work on a price for those now. I'm keeping track of order for dibs and if the people that have first dibs meet my minimum price, there will be no bid wars, just looking to be fair and clear this stuff out.

I'm shipping UPS for tracking purposes and because generally I feel they are much more reliable than USPS.

So far:

Marauder410 has first dibs on intake setup, followed by kyleaz2000 for second.
yjmud has first dibs on headlamp housings, followed by Black&Gifted for second.

And of course, CBT has first dibs on imaginary floormats, followed by Black&Gifted for second and SC Cheesehead for third. It's a tough race gentlemen, but for a worthy item. :P lol

I'll be snapping pics of the parts and posting them here as well as sending to the appropriate parties ASAP.

[stryker]

hey guys, got a few things here that I found from when I had my MM, and it's time to clear it out to get space back in the garage.

While i'm no fan of the "make me an offer" without posting a price, I'm just posting these up here before I decide to take them to the junkyards in a day or so to see what I can get there if nobody wants them here.

tl;dr: if you see something you like, let me know, I'll tell you my asking price and we can work from there. Nothing is too concrete now.

I have:
Ford 3.55 ring and pinion with approximately 97K on them.

two primary cats (the ones right behind the factory manifolds), somewhere between 60-65K on them.

left and right factory Marauder headlamp housings with a fair bit of hazing on them with new bulbs in them (came with the replacement housings I bought, but I had sylvanias before, so I stuck with sylvania instead of the new bulbs that came with the new housings.)

factory Marauder air box and zip tube (I think? basically it's the entire factory intake arm that was replaced with the JLT that I bought.) DEFINITELY needs a new filter though.

This is stuff I am comfortable shipping.

I also have a factory marauder driveshaft if anyone happens to want to pick it up locally or pay me boatloads to figure out how to ship it to them.

I have more bits, but it's realistically only suitable for scrap, basically parts of my old busted transmission and my old axles that had to be replaced during the gear swap for being the notorious "soft axles"



So, all that being said, any interest here before I start calling the local junkyards and scrap metal collectors?;) The airbox comes with the MAF ?

:confused: What material are constructed the MM drive shaft ?

:confused: I need to get a police interceptor nose to fit with MMdrive shaft I mean if the drivesaft is longer than CVLX steel one ?

Let me know Mang. :)

[MrBluGruv]

;) The airbox comes with the MAF ?

:confused: What material are constructed the MM drive shaft ?

:confused: I need to get a police interceptor nose to fit with MMdrive shaft I mean if the drivesaft is longer than CVLX steel one ?

Let me know Mang. :)

1. MAF isn't included with the MM intake setup, when you swap to an aftermarket intake you re-use the factory MAF so that stayed with the car. Pics in a bit will detail better I think.

2. Driveshaft has been scrapped already, it's off the table. The only three items left are what I mentioned just above your post: MM intake, MM headlight housings, factory 3.55 rear ring and pinion.

[MrBluGruv]

Here are pictures of the headlamps and the intake, just for the sake of those waiting in line if the current pending deals fall through for whatever reason:

Headlamps:

http://i69.photobucket.com/albums/i57/blugruv/marauder%20parts/2012-01-28142224.jpg


Intake:

http://i69.photobucket.com/albums/i57/blugruv/marauder%20parts/2012-01-28142434.jpg

[MrBluGruv]

I seriously want to snag that intake from you. I'm doing a Vic build and would like that air box and zip tube. Ha



Well, it looks like first dibs found a deal local to him, so you're up. :) PM being sent to you now with price I'd like to get for it....

[MrBluGruv]

i will take pics of the head lights and seriously call seconds if possible.

First dibs forfeited position on these as well, sending you a PM now...