Eaton swap belt size

[2k1 SVT]

I'm doing an Eaton swap using the custom brackets for the Marauders on my 2001 Cobra and I'm wondering what size belt I would need with a 3.4 upper and stock lower. Any help would be greatly appreciated.
Thanks,
Brian

[2k1 SVT]

I found some belt sizes on the eaton swap parts list but I dont know which one exactly

[SC Cheesehead]

I found some belt sizes on the eaton swap parts list but I dont know which one exactly

Stock upper and stock lower should use a Gates 080530 or equivilent (53 1/2" I think).

[bugsyc]

Rex, you use a 3.4 upper and a 2LB lower???what size belt???:confused:

[SC Cheesehead]

Rex, you use a 3.4 upper and a 2LB lower???what size belt???:confused:


I'm running a a Stock Eaton 3.6 Upper with 2 lb lower and I'm using a 25080537 Belt from NAPA.

[2k1 SVT]

Wait I'm not running the stock pulleys, I have a Metco 3.4 upper with a stock lower so the belt that you mentioned would probably be too large right?

[burt ragio]

53.5" P/N KO80530 should do the trick.

[2k1 SVT]

53.5" P/N KO80530 should do the trick.

Okay, thanks a lot :burnout: