Auto Meter Fuel Pressure Gauge Install

[montazch]

Hello everyone.

I am attempting to install this gauge on a stock motor. Where is the best place to tap into the fuel line(s). I'm guessing on the rails but that is as far as I have gotten.

Please help. Thanks a million!!!! :bows:

[Fourth Horseman]

Hello everyone.

I am attempting to install this gauge on a stock motor. Where is the best place to tap into the fuel line(s). I'm guessing on the rails but that is as far as I have gotten.

Please help. Thanks a million!!!! :bows:

I pulled the shrader valve out of the driver's side fuel rail and installed the sender there. I got a 45deg elbow to get the sender out of the way of other parts. Works like a charm.

[montazch]

Awesome! Fourth Horseman, may I bother you for a picture? Visual aids are a bonus for me. Thank you!!

[Fourth Horseman]

This is an old picture and a little blurry, sorry. But you can see that I used a brass 45 deg fitting to get the sender out of the way of the IAC valve. It's been running great setup like this. Hope this helps.

http://www.fourthhorseman.net/temp/fp_sender.jpg

[1stMerc]

Same here. Picked up a pack of adapters from AutoZone. Had to bend the tube down a wee bit to get full clearance. Unfortunately can't find pics.

[montazch]

This is awesome enough!!! Thank you! Thank you! Thank you!!!!

Now I can get this part done! sincerely, -jeffrey :bows: