height from wheel center to wheelwell lip

[Green96]

I need to know what the stock rest height is from the center of the wheel to the lip of the wheel well. I had lowered mine a little when I had larger rear tires to try to maintain stock height. Now that I am running the same tires all the way around I raised it back up. It still looks a little low, but I cannot find my notes. Can someone with stock ride height help me out? Thanks in advance!

[Muddflapp]

I don't know if this helps.
15 5/16"

2004 DTR Marauder 27869 mi
Vehicle sitting on a flat garage floor. sealed but not panted, no sprinkles.
Stock Rims. Original front Goodrich KDSW. Rear KDSW replaced 8/30/11

Floor to Fender lip
RF
Floor to Fender lip: 27 7/8"
Floor to center of the head: 12 9/16"
TP 32.5psi
TD 4/32"

LF
Floor to Fender lip: 27 6/8"
Floor to center of the head: 12 9/16"
TP 32psi
TD 4/32"

RR TD 7/32"
LR TD 8/32"
Wheels are turned to the right just slightly. More noticeable on the right than the left.

Car has in the glovebox: Factory owners manual in a zippered case and an expired as of yesterday auto liability paper.

In the console are several gas receipts, sunglasses, extended warranty packet.

In the passenger seat is a black washcloth and a 707 brand M2010 motorcycle helmet with no face shield and the rubber nose piece removed.

In the trunk is no spare, no jack, a fold out chair, 1 1/2 full roles of blue painters tape, a face shield off of a motorcycle helmet, a new green shop towel.

I assume I scrubbed of a little of the tire diameters on Saturday, when I ran 10 runs at an autocross. I was the only one driving a land yacht as they said.