No park or taillights

[slickster]

So I got a led bulb for my tag but would not fit in the socket correctly so like a boss I took a flathead and tried to bend the prongs while the park lights where on then they went out. So I check all fuses and bulbs are fine. Brake light still work what the he'll can this be:confused:

[ctrlraven]

And you didn't say what the problem is?

[slickster]

No park or taillights. Break lights headlights work

[slickster]

It can't be cook wiring cause the brake lights still work. Could I have burnt the switch?

[ctrlraven]

Did you check the park bulbs up front and in the taillights?

[slickster]

Yep and flashers work

[ctrlraven]

Did you remove the tag led bulb and see if that does anything?

I would test the bulbs to make sure they are all good, if so then you need a test light or multimeter and check the connections.

[slickster]

Took the tag light out but same thing I also notice no dash lights.

[slickster]

This sounds like my problem. A friend and I troubleshot this down to the signal that is sent from the ECU to the "TAIL" relay. We assume it should send a ground to the relay, because when we ground it out, all the lights come on as they should. Right now, there is a constant 2 volts to the relay from the ECU, and when we turn the lights on to the first position (parking light position, before full on headlights), there is 4 volts to the relay from the ECU.

[yjmud]

stupid question did you replace the fuse anyways?