View Full Version : Wanted To Buy Driver side cylinder head
breeze
04-01-2012, 10:31 AM
Title says all, shoot me a PM.
Black&Gifted
04-01-2012, 07:17 PM
Complete or bare?
babbage
04-02-2012, 05:25 AM
Everything Ok?
breeze
04-02-2012, 07:10 AM
Complete or bare?
Complete
Everything Ok?
#7 cylinder no compression, oil on plug, possible blown head gasket, burning coolant.
RacerX
04-02-2012, 08:05 AM
Your head may be ok. May be a valve, dropped seat, blown gasket, etc.
88LTDCV351
04-02-2012, 08:13 AM
When I had my cylinder head replaced, I was told that Ford service bulletin recommended not to repair the cylinder head but to only replace it. Just FYI.
breeze
04-02-2012, 09:24 AM
Wanted to double check with u guys aren't mm, cobra, and mach 1 heads all the same?
RacerX
04-02-2012, 09:38 AM
Not all Cobra. You want later C Heads. Stick with 03/04 Cobra, MM, Mach1 or Aviator.
breeze
04-02-2012, 11:47 AM
Not all Cobra. You want later C Heads. Stick with 03/04 Cobra, MM, Mach1 or Aviator.
Yea ment in those years but thanks
RacerX
04-02-2012, 02:41 PM
Hey, check all the mod motor sites because in my search for goodies, I saw some single later C heads for sale for cheap money. It was either mach1reg, modularfords or somewhere else... Can't remeber. :D
breeze
04-02-2012, 04:42 PM
Is $500 a bit too much for used
03mmmonroe
04-02-2012, 06:55 PM
You have a PM for $400 to your door.
breeze
05-25-2012, 06:22 PM
Yea need another driver side head folks, PM me.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.