Big Three Upgrade Question

[Baconbit]

I will be completing my big three upgrade soon and I was wondering what anyone that has done this has used to connect the power wire to their alternator?

[MOTOWN]

A brass o ring crimp terminal, you can pick one up from any car audio shop

[fastblackmerc]

I use brass lugs and solder them to the wires. IMHO, much better than a crimped connection. You can get the lugs at any FLAPS and WalMart.

I also heat shrink tube the connections.

I use these to solder. Notice there are different sizes for the various diameter lugs. I also use the CL-Flux.

http://www.ebay.com/sch/i.html?_trksid=p5197.m570.l131 3&_nkw=solder+pellets&_sacat=0

[Baconbit]

Anyone have a good picture of their alternator up close with the wire hooked to it?

[MOTOWN]

Heres a pic from DB electricals site http://www.dbelectrical.com/wolthuis.aspx?e=0&src=images%2fproduct%2fmedium% 2f3478_4_.jpg

http://www.dbelectrical.com/wolthuis.aspx?e=0&src=images%2fproduct%2fmedium% 2f3478_3_.jpg

[fastblackmerc]

Heres a pic from DB electricals site http://www.dbelectrical.com/wolthuis.aspx?e=0&src=images%2fproduct%2fmedium% 2f3478_4_.jpg

http://www.dbelectrical.com/wolthuis.aspx?e=0&src=images%2fproduct%2fmedium% 2f3478_3_.jpg

Nice picture, but that isn't the alternator that works on a Marauder.

Just open the hood and at the top of the alternator.

[MOTOWN]

Nice picture, but that isn't the alternator that works on a Marauder.

Just open the hood and at the top of the alternator.

Im very well aware of that Smart azz! the point is to show the terminal connection, which i did.

[jwibbity]

:popcorn::popcorn::popcorn: