Log in

View Full Version : Sct sf3 -3015



VMARAUDER
04-14-2012, 12:23 AM
Man I have trouble. Just opened and updated my sf3 and now it says filesystem error needs updating but when I update the firmware it still says the same. Basically there is no software on the device now. Can anyone advise me on how to reinstall the system. It is new and had never been hooked to my car. I have read everything on their site but still can't get it

Granddaddy Marq
04-14-2012, 03:48 AM
Sounds like there's no tune on it. Same thing with mine. Had to take it back and get them to load the tunes in it.

SpartaPerformance
04-14-2012, 09:59 AM
Sounds like there's no tune on it. Same thing with mine. Had to take it back and get them to load the tunes in it.

There isn't a tune in the SF3. The SF3 is for the owner to adjust parameters on his/her own. The X3 has tunes loaded up into it, you must buy a tune and upload it to the SF3 if you do not want to mess parameters yourself.

VMARAUDER
04-14-2012, 08:05 PM
Being kind of new at this time thing, was I misled in advertising? What I purchased was to have 3 tunes for the MM. MODEL SCT SF3 - 3015. What I did was updated the device and then attempted to down load the latest firmware. Mistake was the download was not for my 3015 but for another SF3. So now all I get is "filesystem error needs to be related". I did not read thoroughly the directions given, so the software is not on the device. Got from Amazon less than 30 days so I sent it back and they are shipping a new one. Lesson learned is inquire @ MM.net 1st
Thanks
Pm me regarding the 4.10 gears. I want to purchase now and need to know what extra hardware is needed. What I have read is a install kit would be necessary but which one. 2004 Marauder has 96k on it.