boost

[breeze]

Considering Eaton swap and have 3.1 upper and #2 Lower. Will this make too much boost for stock motor or I'm good?

[SC Cheesehead]

Considering Eaton swap and have 3.1 upper and #2 Lower. Will this make too much boost for stock motor or I'm good?


That combination will give you between 14.5 and 15 lbs. boost, IMO, getting up there for a stock motor.

[DEFYANT]

Stay below 13#. Even 13# is pushing it.

[ImpalaSlayer]

thats the exact combo i have on mine, errr HAD on mine. it made 14.2lbs

its still set up that way as far as i know, and still going strong. its all int he tune man. i made 14psi but only 435 to the tires, i was well dumbed down. there was really no ryme or reason i went with this combo other then looks under the hood

[breeze]

thats the exact combo i have on mine, errr HAD on mine. it made 14.2lbs

its still set up that way as far as i know, and still going strong. its all int he tune man. i made 14psi but only 435 to the tires, i was well dumbed down. there was really no ryme or reason i went with this combo other then looks under the hood

You also have LT's and I don't though so I won't have to dial it back as far if I made more. I went with the setup because I figured it put me right at the numbers I want and be DONE with the car.

[justbob]

A little high I think. Heck, I just made 466 with LT's at only 9.7#'s!

Sent from my Ally using Tapatalk

[robertmee]

Same here.....463 with stock pulleys