Finally, an Option to COT Mods for Eaton Swaps

[SC Cheesehead]

Here's a BIG tip of the hat to the Zackmeister for an alternative to modifying the COT on Eaton Swaps.

Check this out guys, it is SWEET! :2thumbs:

http://www.thechicagogarage.com/forum/marauder-tech/119762-eaton-swap-cot-woes-finally-solved.html#post2375389

[BODYMAN]

Zack is no doubt the man. His innovation and helpfulness to anyone basically sums it up. He has come up with so much good for our cars. Just like this he asked that someone link to this site to make sure it is avaible to all MM owners. Hell yea

[DOOM]

Good stuff! :up:

[MOTOWN]

Thats a good find! i always figured someone would do this.

[SC Cheesehead]

Yup, and you'll note that the parts include an inlet port for a rear cooling mod hose, talk about FTW! :banana2:

[MOTOWN]

Yup, and you'll note that the parts include an inlet port for a rear cooling mod hose, talk about FTW! :banana2:
Ok who is gonna be first?:coolman:

[MercOut]

Thanks for passing it along Cheesehead.....he does care about us LOL

[SC Cheesehead]

Ok who is gonna be first?:coolman:

I'm seriously thinking retro-fit.

[BODYMAN]

Maybe I should buy the Trilogy Twin Screw & try it out on that. I really wish that car hadnt been posted

[ImpalaSlayer]

so you loose the tstat all together?


where do you put the second temp sensor? lines seem much smaller then the factory tube of the COT

[MOTOWN]

so you loose the tstat all together?


where do you put the second temp sensor? lines seem much smaller then the factory tube of the COT

No it goes inside the main housing that attaches to the radiator

[ImpalaSlayer]

No it goes inside the main housing that attaches to the radiator


im assuming you meant he tstat? how about the coolant sensor

[MOTOWN]

im assuming you meant he tstat? how about the coolant sensor
yes, didnt think about the sensor, maybe use the rear cooling mod port

[TooManyFords]

Ok who is gonna be first?:coolman:

I've had this on ProRauder for quite a while now...

http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc7/406775_10150568030951393_57365 1392_11088668_958325739_n.jpg

[Mr. Man]

I've had this on ProRauder for quite a while now...

http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc7/406775_10150568030951393_57365 1392_11088668_958325739_n.jpg
John I never get tired of looking at this motor. Even if it topped out at 60mph (I'm sure it goes much faster) it's just a cool thing to look at.:2thumbs:

[SC Cheesehead]

John I never get tired of looking at this motor. Even if it topped out at 60mph (I'm sure it goes much faster) it's just a cool thing to look at.:2thumbs:

The ultimate chick magnet... ;)

[Mr. Man]

The ultimate chick magnet... ;)
Well he is in Iowa

http://www.cindysportraits.com/baby%20chicks.jpg

[SC Cheesehead]

Well he is in Iowa

http://www.cindysportraits.com/baby%20chicks.jpg

Hot chicks, for sure... ;)

[Black&Gifted]

Sent an email and pm to the fabricator of these. Hopefully I'll be able to get a set as it appears at least the first run is somewhat limited.

[Blown3.8]

MMR makes some AN water outlet adapters. They don't have the temp sender ports though.

TMF what did you use to put the 2 hoses together?

Click modular engine components then coolant related (http://modularmustangracing.com/)

t stat housing (http://www.summitracing.com/parts/MEZ-WN0072/)

Water neck (http://www.summitracing.com/parts/SME-2200/)

[TooManyFords]

TMF what did you use to put the 2 hoses together?

It is a housing that is similar to the one linked to above, but it has the temp sender port in the end and the two coolant lines T off the sides. There is no provision for a thermostat in this housing. I will get the specs and where you can find it this weekend when I go get the car.

[Black&Gifted]

so you loose the tstat all together?


where do you put the second temp sensor? lines seem much smaller then the factory tube of the COT

For marauders and te 2nd temp sensor, you need dual drivers side fittings. Just ordered it and I am really excited about the flexibility of this system.

[ctrlraven]

Pretty slick!

[clintons4]

For marauders and te 2nd temp sensor, you need dual drivers side fittings. Just ordered it and I am really excited about the flexibility of this system.


What email do you have for them? modularspeed@... whatever or something else. I really wanted to buy one of these setups and keep getting strange email responses :mad2:

[SC Cheesehead]

What email do you have for them? modularspeed@... whatever or something else. I really wanted to buy one of these setups and keep getting strange email responses :mad2:

Check out the link I posted up in post #1, I haven't contacted them directly, just passed along the info Zack had over on TCG.

[clintons4]

I had the correct email address. There was something wrong with their email. All of these are gone :(

[massacre]

Glad I got mine.

I'm glad Zack relayed the message over to you guys but the one who came up with these is "modularspeed". He used to have his own website, I bought some stuff off him way back years ago. He's definitely always messing around with Mach 1 stuff, I guess he & Zach are very similar in that way.

But I had just done the "James Hell" cooling system, with the inline thermostat in the upper hose, of course this comes out right after that lol. Isn't that always the way it is?

[Black&Gifted]

glad i got mine also. they are PIMP pieces. However, I believe Zack has a couple COT ready to go for eaton swaps.

[clintons4]

someone should sell me theirs :D