The madness continues!!!!!!

[JoeBoomz]

Looks great! Where did those PCV lines get run to?

[MOTOWN]

Looks great! Where did those PCV lines get run to?

Runs under the intake to a Y block with the passenger side breather then to the breather tank.

[martyo]

Brackets fab'd up and AC plumbed. Should be pulling a vacuum on the AC tomorrow!

[STEPS]

looks really great can see why # 230 was ford blue
best of luck with the ride.....................

[MOTOWN]

Brackets fab'd up and AC plumbed. Should be pulling a vacuum on the AC tomorrow!

Wooooo Hooooo:banana:

[CWright]

Now we are getting down to bizzness! :popcorn:

[MOTOWN]

Now we are getting down to bizzness! :popcorn:

Yeah hopefully i can hit the magic number 700RWHP!:coolman::burnout:

[8UWITH6]

Race cars dont need AC :)

[MOTOWN]

Race cars dont need AC :)

Very true! But it ain't a race car:D

[WhatsUpDOHC]

Here is a couple i snapped today while i was waiting on the flat bed tow.



Dude!!! We've got to hear this thing run!
Put us out of our misery.

[Jeronimojc]

Yeah hopefully i can hit the magic number 700RWHP!:coolman::burnout:

That's up there! Congrats in getting this far. Can't wait to see some video.

[MOTOWN]

Picked up 10 gallons of VP 110 octane oxygenated racing fuel, Jeff will be spinning it up on the dyno tomorrow at 1 pm.

[Comin' in Hot]

i CANNOT wait, the suspense is killing me!!!!!!!

[MOTOWN]

i CANNOT wait, the suspense is killing me!!!!!!!

You know i am actually kind of geeked about tomorrow!:rolleyes:

[Mebot]

Live webcam/streaming please. I'll tune in at work and blast the volume on my puny laptop speaker haha

sent from a Samsung Galaxy far far away..

[WhatsUpDOHC]

Picked up 10 gallons of VP 110 octane oxygenated racing fuel, Jeff will be spinning it up on the dyno tomorrow at 1 pm.

Too bad we can't smell it. :(

Chanel no 110. Mmmmmmmmm

I'll take a video, though.

[MOTOWN]

Too bad we can't smell it. :(

Chanel no 110. Mmmmmmmmm

I'll take a video, though.

Ill get video:banana:

[martyo]

Too bad we can't smell it. :(

Chanel no 110. Mmmmmmmmm

I'll take a video, though.

Be happy the oxygenated stuff smells like azz.

[Comin' in Hot]

a live video feed would be epic

[MOTOWN]

Be happy the oxygenated stuff smells like azz.

Very true!:mad: i was glad when it was all in da tank!


a live video feed would be epic

That would be sweet! if i only knew how:confused:

[lji372]

That would be sweet! if i only knew how:confused:[/QUOTE]

Call espn or the velocity channel :D

[MOTOWN]

That would be sweet! if i only knew how:confused:

Call espn or the velocity channel :D[/QUOTE]

Errrrrr yeah im sure they will rush right over!:shake: LMAO

[Guittard22]

I'm sure NASA will have FBI agents zooming in on that baby when it starts up lol :)

[MOTOWN]

I'm sure NASA will have FBI agents zooming in on that baby when it starts up lol :)

I have a feeling someone is hiding some BOOST:burnout:

[WhatsUpDOHC]

Be happy the oxygenated stuff smells like azz.

Perhaps I can't discern the finer bouquets of these "boutique" racin' fuelzzzz. :cool:

Never met a racing fuel that I didn't like.

[RubberCtyRauder]

http://i637.photobucket.com/albums/uu92/mdnos/meme_zps33097e28.jpg

[martyo]

Never met a racing fuel that I didn't like.

Come get ya some of the stuff that Motown is running!!! :P

[MOTOWN]

Well we Got started late , blew a line , then had a leak on a vband clamp so we stopped at 500 rwhp, shouldn't have any problems once we fix the leak only made 12 psi of boost.
Back at it tomorrow!

[MOTOWN]

Well today we made several pulls on the dyno and couldn't make more than 12 - 13 psi , bypassed the intercooler with straight pipe and the car made 22psi just shy of 6K!

Problem found! I have a bad intercooler ,I'll call precision Turbo And Engine Monday and figure out what my options are since I bought this new in the box, hopefully I can exchange it for another one and get the car done.

[CWright]

Well today we made several pulls on the dyno and couldn't make more than 12 - 13 psi , bypassed the intercooler with straight pipe and the car made 22psi just shy of 6K!

Problem found! I have a bad intercooler ,I'll call precision Turbo And Engine Monday and figure out what my options are since I bought this new in the box, hopefully I can exchange it for another one and get the car done.



I know you can't wait! That thing will be an ANIMAL! You raised the bar for me now! :D

[Jeronimojc]

Well today we made several pulls on the dyno and couldn't make more than 12 - 13 psi , bypassed the intercooler with straight pipe and the car made 22psi just shy of 6K!

So if 12 psi gets you to 500RWHP and you can get up to 22 psi then :eek:...

What becomes the weak link on a monster like that?

[CWright]

So if 12 psi gets you to 500RWHP and you can get up to 22 psi then :eek:...

What becomes the weak link on a monster like that?


Careful, You'll freak him out about his transmission. :lol:

[martyo]

Well today we made several pulls on the dyno and couldn't make more than 12 - 13 psi , bypassed the intercooler with straight pipe and the car made 22psi just shy of 6K!

Problem found! I have a bad intercooler ,I'll call precision Turbo And Engine Monday and figure out what my options are since I bought this new in the box, hopefully I can exchange it for another one and get the car done.

This car stuff is easy!! It makes ya wanna take up knitting!!!!

[8UWITH6]

Geeee wiz. I hope you get this sorted out. It isnt any fun if everything falls into place all at once is it? :)

[JoeBoomz]

Careful, You'll freak him out about his transmission. :lol:


http://www.tciauto.com/tc/super-streetfightertm-4r70w-transmission-98-04-4-6lhtml

Problem solved, free shipping. We're looking at getting one for our Whipple build too :beer:

[MOTOWN]

Talked to Precision Turbo and Engine today ,and was issued an RMA# for the intercooler, they said they will replace it if its found to be blocked, or leaking, ill pull it tomorrow morning when the shop opens, and send it back to Precision for inspection.

[lji372]

Tick..........tock...........t ick

:popcorn:

[martyo]

Tick..........tock...........t ick

:popcorn:

Yeah this hot rod **** is simple and should happen over night!! :D

[lji372]

Yeah this hot rod **** is simple and should happen over night!! :D

1-27-14 till 2-11-14 overnight :confused:

Time flies when your having fun :D

[RacerX]

No...
"Times fun when you're having flies!"
Jeremiah the Bullfrog
:P

[martyo]

1-27-14 till 2-11-14 overnight :confused:

Time flies when your having fun :D

That is fourteen days. Four of which were weekend days and stuff does not move in transit. Plus a think we were closed one of the days so Roger could not come get his intercooler. So it has only been nine days.

Patience my pretty. Patience!

[8UWITH6]

LOL @ Martyo

[lji372]

That is fourteen days. Four of which were weekend days and stuff does not move in transit. Plus a think we were closed one of the days so Roger could not come get his intercooler. So it has only been nine days.

Patience my pretty. Patience!

It moves, like speed it costs money. how fast do you want it ;)

[martyo]

It moves, like speed it costs money. how fast do you want it ;)

It ain't MO Money it is Roger's money!!! :P

[martyo]

LOL @ Martyo

I am only here for my entertainment!! :P

[Limited360]

That is fourteen days. Four of which were weekend days and stuff does not move in transit. Plus a think we were closed one of the days so Roger could not come get his intercooler. So it has only been nine days.



Patience my pretty. Patience!




Marty your lucky he doesn't live by you... Patience is not a word in his dictionary!


Sent from my iPhone using Tapatalk so I may sound retarded.

[martyo]

Marty your lucky he doesn't live by you... Patience is not a word in his dictionary!



I would just ignore him. That is what my wife does to me and it seems to work well for her.

[lji372]

Marty your lucky he doesn't live by you... Patience is not a word in his dictionary!


Sent from my iPhone using Tapatalk so I may sound retarded.

Unless I'm looking for the end of the track :shake:

OUCH!!!!

[Limited360]

Unless I'm looking for the end of the track :shake:



OUCH!!!!


Ha. Truth to this!! ;)


Sent from my iPhone using Tapatalk so I may sound retarded.

[MOTOWN]

Funny stuff! talked to Precision today and a new intercooler will be shipped out tomorrow, precision was a bit backed up with repairs that were ahead of mines, so i should see it sometimes next week.

[lji372]

Funny stuff! talked to Precision today and a new intercooler will be shipped out tomorrow, precision was a bit backed up with repairs that were ahead of mines, so i should see it sometimes next week.


Was it a mfg defect?

[MOTOWN]

Was it a mfg defect?

we loss 12psi thru the intercooler , so i would say yes:depress:

[lji372]

we loss 12psi thru the intercooler , so i would say yes:depress:

That's what I would have thought, but in a previous post I thought they would send a new one instead of making you wait for a repair is all :dunno:



Talked to Precision Turbo and Engine today ,and was issued an RMA# for the intercooler, they said they will replace it if its found to be blocked, or leaking, ill pull it tomorrow morning when the shop opens, and send it back to Precision for inspection.


You sir deserve this thing to go smoooooother :beer:

[MOTOWN]

That's what I would have thought, but in a previous post I thought they would send a new one instead of making you wait for a repair is all :dunno:





You sir deserve this thing to go smoooooother :beer:

I was talking to CWright tonight and i told him this is one of those builds that has fought tooth and nail to be modified! In the 20+ years ive been doing this some projects come together like clock work, and some are complete MADNESS:rolleyes:

[MOTOWN]

[QUOTE=lji372;1364321]That's what I would have thought, but in a previous post I thought they would send a new one instead of making you wait for a repair is all

To clarify they are sending a brand new intercooler.

[CWright]

I was talking to CWright tonight and i told him this is one of those builds that has fought tooth and nail to be modified! In the 20+ years ive been doing this some projects come together like clock work, and some are complete MADNESS:rolleyes:


The good thing is you can see the light at the end of the tunnel. Now.....once you have driven a year, tear all that stuff off, sell it, and go with a 4.0 Whipple! :D

[Comin' in Hot]

The good thing is you can see the light at the end of the tunnel. Now.....once you have driven a year, tear all that stuff off, sell it, and go with a 4.0 Whipple! :D

please don't tempt him :lol:

[CWright]

please don't tempt him :lol:


:seesaw:


......

[Comin' in Hot]

:seesaw:


......
the best emoticon I have seen yet lol

[JoeBoomz]

BAH I was hoping for some CAR updates when I saw a post in this thread. How disappointed. Can't wait to see (hear?) the final results!

[MOTOWN]

The good thing is you can see the light at the end of the tunnel. Now.....once you have driven a year, tear all that stuff off, sell it, and go with a 4.0 Whipple! :D

Sure ill start "The Madness gone Insane thread" donations MANDATORY!:censor::lol:

[CWright]

Sure ill start "The Madness gone Insane thread" donations MANDATORY!:censor::lol:


Can I have the left overs? :D

[8UWITH6]

It will be worth it in the end............. push on.

[MOTOWN]

Can I have the left overs? :D

LOL i have seriously considered a 4.0L Whipple/Crusher setup, but i can in no way justify or afford that swap, im very commited to seeing my V7 shine, im just an Intercooler away!:arcade::sweat:

[RubberCtyRauder]

Pretty soon this is gonna be March Madness with Jeff, Marty, Motown, and that dyno as the Final four:lol:

[MOTOWN]

Pretty soon this is gonna be March Madness with Jeff, Marty, Motown, and that dyno as the Final four:lol:

LMAO!:lol: good one bud!:high5:

[LOWBUCKMM]

To clarify they are sending a brand new intercooler.

I just wish Precision was faster rebuilding my turbo. Took them almost a month to even look at it. They are very backed up. But I hope the you're new inter cooler will solve the problem. Slap that bi*ch on and Let the 700rwhp come to life.

[Zack]

I just wish Precision was faster rebuilding my turbo. Took them almost a month to even look at it. They are very backed up. But I hope the you're new inter cooler will solve the problem. Slap that bi*ch on and Let the 700rwhp come to life.

There are good turbo rebuilders all over the country

[MOTOWN]

Well my intercooler saga continues! the replacement for the first unit arrived defective obviously a casting defect!

In Precisions defense they did issue a call tag for the defective unit, and shipped another intercooler out overnight, however once back on the dyno we experienced the same problem 11PSI max, at that point i called precision and handed Jeff the phone so he could be the calmer voice of reason, after he explained the we were loosing 12PSI across the intercooler, and made more power with a straight pipe the tech admitted they have switched to a much less efficient core that cant handle high boost (in my case 22PSI) had i known that i never would have bothered with a replacement.

So in the A.M. ill be calling Procharger, and spearco, i would love to snag one of the 6 core beast like Tripple Threat is running on his Purple , but ill also consider a Spearco unit which has identical demensions to the Precision unit which makes for an easy install, ill know which one im going with sometime monday.

Pics of the defective unit

http://i1020.photobucket.com/albums/af324/sims36/20140218_130054_zps0dd8dc5e.jp g

http://i1020.photobucket.com/albums/af324/sims36/20140218_130121_zpsa35f63e2.jp g

[jwibbity]

that sucks man, why would they not tell you that their inter cooler couldnt handle your boost :mad2:

[RubberCtyRauder]

In the year 2525, will MOTOWN'S intercooler survive....

http://www.youtube.com/watch?v=izQB2-Kmiic


Sorry, to hear Motown.....Someone somewhere has to have an I/C that can handle the psi..:beer:

[Limited360]

This confuses me as 12psi is phuq all in the performance world... I find it shocking they changed designs and had this much of a pressure drop issue... Shame on them!

What size inlet / outlet is that intercooler? Just curious. I imagine 3"?

[Zack]

Just get a treadstone

[Limited360]

Just get a treadstone

Actually this is what I was going to suggest as well...

I have ran those on multiple cars over the years without issues. My last was on a car with 3" in and out making 650whp... Was a DSM but still... Airflow is airflow. That was running 26psi.

[MOTOWN]

This confuses me as 12psi is phuq all in the performance world... I find it shocking they changed designs and had this much of a pressure drop issue... Shame on them!

What size inlet / outlet is that intercooler? Just curious. I imagine 3"?

The inlet/outlets are 2 3/4" on the Precision unit


Just get a treadstone

Thats also an option, but i prefer Spearco, or Procharger

[JoeBoomz]

Hmmm now you have me wondering if I will be losing boost through my intercooler. Have no idea what brand it is; came with the car.

[justbob]

Can't believe you would lose that much! What exactly is the problem? Piss poor welds? I always found them to make really nice stuff. Unless maybe they don't actually make it?


Self proclaimed Builder Of Badassery.

Buy it, Break it, Build it BETTER.
"Since 2004"

[LOWBUCKMM]

Wow with all these problems you are having with the intercoolers is kinda helping me decided against getting a precision one. Best of luck to you and your search in the best one you can get.

[MOTOWN]

Can't believe you would lose that much! What exactly is the problem? Piss poor welds? I always found them to make really nice stuff. Unless maybe they don't actually make it?


Self proclaimed Builder Of Badassery.

Buy it, Break it, Build it BETTER.
"Since 2004"

Its actually a bad core design , as he said just not as efficient as the old design , ive used tons of Precisions intercoolers, and turbos on the Grandnationals and never had a problem, they do fab the intercoolers in house.


Wow with all these problems you are having with the intercoolers is kinda helping me decided against getting a precision one. Best of luck to you and your search in the best one you can get.

Thanks, Spearco, and Treadstone make some nice intercoolers, you may want to consider one of those, Turbonetics owns Spearco now.

[MOTOWN]

Hmmm now you have me wondering if I will be losing boost through my intercooler. Have no idea what brand it is; came with the car.

I hope its not an Icevex!:flamer:

[Blown3.8]

Whats wrong with Ice Vex?

[MOTOWN]

Whats wrong with Ice Vex?

Nothing if you are 10psi or less, beyond that they are not very effective, or efficient.

[MOTOWN]

Ive settled on a ProCharger 1550hp Intercooler, after looking around i was able to locate a brand new one a guy had up for sale, bye bye bottle neck! This thing is huge at 27.5" long, 12" wide, 6" deep! no matter what S/C or Turbo is on the car this intercooler will be up to the task.

http://i1020.photobucket.com/albums/af324/sims36/IMG_2710_zps801cea97.jpg

http://i1020.photobucket.com/albums/af324/sims36/IMG_0485_zps64adf4b5.jpg

http://i1020.photobucket.com/albums/af324/sims36/IMG_9783_zps946ee920.jpg

[lji372]

Dayummmm.

Like she said, will it fit :D

[Comin' in Hot]

_Z1Krfww5eE

[LANDY]

That thick core will heatsoak like no other. Street car wants an long and thin core. No more than 3.5".

[Zack]

Shoulda got a Treadstone. 6" intercooler?? Come on...

[Zack]

Where on the car would you mount that anyway? Your piping kit is gonna need a complete do-over now.

[justbob]

Where on the car would you mount that anyway? Your piping kit is gonna need a complete do-over now.


Bend over, he'll show ya? Seemed fitting. Sorry, had too. :)

But if the myth is true... :eek: sorry friend! :(


Self proclaimed Builder Of Badassery.

Buy it, Break it, Build it BETTER.
"Since 2004"

[Triple Threat]

Good choice.That is the same I/C I had on the race car last year.I am using it on purple this year. It will fit with some with some modification.

[Comin' in Hot]

It'll fit... mine is 24 wide by about 8 inches thick by 8 inches tall with the fans and with room to spare. But you could deathly say goodbye to your crash bumper.

[martyo]

Woooooot!!!!

[MOTOWN]

That thick core will heatsoak like no other. Street car wants an long and thin core. No more than 3.5".

Landy your statement is 100% theory, and 0% factual! lets go back to 1992 i built my last of 3 Grandnationals first two had Precision front mounts with 3.5" thick cores, put that same one on the last build, IATs were thru the roof! custom fabbed an intercooler with a 6" thick core, mind you this build had a Precision 88mm ball bearing turbo , IATs never went past 115-125 on the streets, and the car made 1072RWHP, and went 9.32 in the 1/4!


Shoulda got a Treadstone. 6" intercooler?? Come on...

Treadstones are decent, but they cannot hold a torch to a Prochager unit! is it overkill? yep, but so is the entire build! thats the beauty of it:banana:

[MOTOWN]

Where on the car would you mount that anyway? Your piping kit is gonna need a complete do-over now.

The piping will not need a total do over at all, the discharge side from the S/C will bolt up with a 3" to 4" coupler, the T/B side will need a 90* elbow or two, stay tuned and ill show you how its done son!:cool4:

[1stMerc]

That baby will definately flow some air. Like he said with the corect silicone couplers no new piping needed.

[hotford]

Build it and they will COME!!!!!!!

[8UWITH6]

Landy your statement is 100% theory, and 0% factual! lets go back to 1992 i built my last of 3 Grandnationals first two had Precision front mounts with 3.5" thick cores, put that same one on the last build, IATs were thru the roof! custom fabbed an intercooler with a 6" thick core, mind you this build had a Precision 88mm ball bearing turbo , IATs never went past 115-125 on the streets, and the car made 1072RWHP, and went 9.32 in the 1/4!



Treadstones are decent, but they cannot hold a torch to a Prochager unit! is it overkill? yep, but so is the entire build! thats the beauty of it:banana:

Didn't know you where a turbo buick guy. LOL, but it does explain a lot about the build on the Marauder! :) Keep grinding!

[Guittard22]

Bigger Is always better

[MOTOWN]

Didn't know you where a turbo buick guy. LOL, but it does explain a lot about the build on the Marauder! :) Keep grinding!

Ohhhhhhhh man that's my first passion, Turbo builds, I wanted to do it on the Marauder but didn't want to deal with routing the down pipe around the K member.

[MOTOWN]

Got the intercooler mounted (the crash bumper is history) it fits like a glove! dropped off the silicone couplers/straight connectors, Brandon will finish it up Tuesday or so, then its back to the dyno! shouldnt have any issues with boost with this Procharger beast!

http://i1020.photobucket.com/albums/af324/sims36/20140405_104621_zpsc05ad426.jp g

http://i1020.photobucket.com/albums/af324/sims36/20140405_104631_zps549c8203.jp g

[MOTOWN]

At MO'S dynoing the car , made 660 RWHP on the first pull , then belt slip at the s/c pulley showed up, and I'm thinking stiffer valve springs may be in order.

[SGT_MERC]

Got the intercooler mounted (the crash bumper is history) it fits like a glove! dropped off the silicone couplers/straight connectors, Brandon will finish it up Tuesday or so, then its back to the dyno! shouldnt have any issues with boost with this Procharger beast!

http://i1020.photobucket.com/albums/af324/sims36/20140405_104621_zpsc05ad426.jp g

http://i1020.photobucket.com/albums/af324/sims36/20140405_104631_zps549c8203.jp g

The crash bumper offers no structural integrity between the 2 frame rails?

[MOTOWN]

Yes the crash bumper does offer protection , but it wasn't happening with that 6" thick ProCharger intercooler in there.

[guspech750]

At MO'S dynoing the car , made 660 RWHP on the first pull , then belt slip at the s/c pulley showed up, and I'm thinking stiffer valve springs may be in order.

OMG:burnout:


Sent from The White House on taxpayers dimes.

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

[justbob]

Yes the crash bumper does offer protection , but it wasn't happening with that 6" thick ProCharger intercooler in there.


Crash bumpers are for girly men! I've seen Roger, he no girly girly man.. :D




Self proclaimed Builder Of Badassery.

Buy it, Break it, Build it BETTER.
"Since 2004"

[CWright]

Crash bumpers are for girly men! I've seen Roger, he no girly girly man.. :D




Self proclaimed Builder Of Badassery.

Buy it, Break it, Build it BETTER.
"Since 2004"



Big MOFO! :D




Roger's all over 700 and I hope I get to witness it in person. I'll see you down there tomorrow! :coolman:

[lji372]

Very nice MR. Roger!! :bows:

[loud2004marquis]

Roger's all over 700 and I hope I get to witness it in person. I'll see you down there tomorrow! :coolman:


Please get some video footage!

[lji372]

Please get some video footage!

what he said!!

dayummmmm roger, that will shorten the heck out of your drive time to detroit :banana2:

[SGT_MERC]

Yes the crash bumper does offer protection , but it wasn't happening with that 6" thick ProCharger intercooler in there.

What I meant was, does the crash bumper help with tying the frame rails together, not just crash protection. Is the complete frame of the car going to lose rigidity due to the removal of the crash bumper? I've had an idea to remove mine for an upgrade I want to do, that's why I'm asking.

[sailsmen]

IMPRESSIVE!
Belt alignment is critical. One washer makes the difference. At operating temp everything expands and can change the alignment.
Trial and error is the only way to get it true. You need a tech with patience and determination.
The Vortech High Traction S/C pulley is a quality product.
Good Luck.

[MOTOWN]

What I meant was, does the crash bumper help with tying the frame rails together, not just crash protection. Is the complete frame of the car going to lose rigidity due to the removal of the crash bumper? I've had an idea to remove mine for an upgrade I want to do, that's why I'm asking.

This is a full frame RWD car, not a Unibody , the crash bumper protects the front of the car if a front impact occurs , it had to go to make room for the intercooler, car is as rigid as ever.


IMPRESSIVE!
Belt alignment is critical. One washer makes the difference. At operating temp everything expands and can change the alignment.
Trial and error is the only way to get it true. You need a tech with patience and determination.
The Vortech High Traction S/C pulley is a quality product.
Good Luck.

I truly dont know what else to say to you, once again the belt alignment is perfect, we sandblasted the rib surface of the pulley, and cut slots in it, that took care of the slip at the S/C pulley, if it were an alignment issue it would be eating ribs off the belt which its not, and no belt dust what so ever.

[MOTOWN]

As mentioned before 660RWHP was the best we could do once the belt slip issue was addressed, valve float was present above 6500 rpm, so ill install better valve springs, and titanium retainers to sustain higher boost pressure. we set it at 18* of timing, and 640RWHP, my IATs were right around 85-90*

http://i1020.photobucket.com/albums/af324/sims36/20140417_151100_zps5a19251b.jp g

[8UWITH6]

Video of car running please............ please?

[MOTOWN]

Chris has a better video he's going to post later, i was busy watching! lol https://www.youtube.com/watch?v=8zT0NOFrbec

[CWright]

Chris has a better video he's going to post later, i was busy watching! lol https://www.youtube.com/watch?v=8zT0NOFrbec



Here ya go buddy!

3YvYDatSAuU

[SGT_MERC]

WOW!!! Very sweet and smooth. I love it
What wheels and tires are on the front, offset and tire size to be more specific?

[MOTOWN]

WOW!!! Very sweet and smooth. I love it
What wheels and tires are on the front, offset and tire size to be more specific?

The fronts are toyo proxes st IIs 315/35 20 , Wheels are Niche Apex 20x10 on a +40MM offset, here is a better pic

http://i1020.photobucket.com/albums/af324/sims36/20140420_180831_zps35a5dad8.jp g

[jwibbity]

The fronts are toyo proxes st IIs 315/35 20 , Wheels are Niche Apex 20x10 on a +40MM offset, here is a better pic

http://i1020.photobucket.com/albums/af324/sims36/20140420_180831_zps35a5dad8.jp g

man those rears are monsters :bows: :bows:

[RubberCtyRauder]

You gonna go into the paving business with them steam rollers Roger? Car is looking sweet and sounding sweet, although that YSI almost vacuumed me up 600+ miles away!

[Odinson]

Wow just wow. Congrats. Your car is where marauders would have been had they been produced through 2014. The 4.6 v8 ecoboost!

Oh and turned up to 11!

*sigh*

To think this all started with a simple trilogy.

[MOTOWN]

To think this all started with a simple trilogy.

That there is the gospel!:beer:

[babbage]

Chris has a better video he's going to post later, i was busy watching! lol https://www.youtube.com/watch?v=8zT0NOFrbec



love the look of the hogan "mail box" in there!

Nice job by Moes on the Dino I like how he didn't just bring it up to max and then let it die -he blipped throttle twice to allow graceful descent.

[SGT_MERC]

What size wheels and tires are on the back as well as offset?

[RubberCtyRauder]

What size wheels and tires are on the back as well as offset?

See post # 618

[SGT_MERC]

See post # 618

Ans where are the specs on the BACK tires and wheels in post #618?

[MOTOWN]

Ans where are the specs on the BACK tires and wheels in post #618?

Rear wheels are 20x10 on a +40mm offset (same as front), Tires are also Toyos, 305/50 20s

[TAKEDOWN]

Bad a$$!!!

[RubberCtyRauder]

Ans where are the specs on the BACK tires and wheels in post #618?

I see Roger provided info, I thought I saw info on both front/rear there..maybe it was another post that had it listed and thought I was seeing it again in this one.

[Jeronimojc]

Motown, just read the entire thread. Awesome stuff!

Can't remember if it was mentioned; What was the boost and S/C pulley size on that last pull. I noticed you sold a 2.9" slotted pulley. Did you change pulley size afterwards?

How did you identify valve float? What's next for this formidable beast?


Sent from my iPhone using Tapatalk

[cer0413]

Awesome thread!!!!!

[MOTOWN]

Awesome thread!!!!!

Meh! That guy is all 20" wheels, and tires! How fast can he be:confused::rolleyes:

[Lowndex]

maybe i should just swipe this guys motor! omg http://www.youtube.com/watch?v=R-NVy1QeevM

That is not a motor - it is a beast!

[Lowndex]

Good luck with your build. The project should keep you from being bored this Winter. :)

[MOTOWN]

Good luck with your build. The project should keep you from being bored this Winter. :)

Take a look at the start date, ive finished the build, and on to the next round of mods! :coolman:

[cer0413]

Take a look at the start date, ive finished the build, and on to the next round of mods! :coolman:
[emoji23] [emoji23]

Good luck with your build. The project should keep you from being bored this Winter. :)
[emoji10]

[8UWITH6]

Bring it to Louisville................

[MOTOWN]

Bring it to Louisville................

Most definitely sir!:beer:

[sailsmen]

Would like to see the vid showing your 761rwhp awesome dyno pull.

[chief455]

Would like to see the vid showing your 761rwhp awesome dyno pull.
Same.
first time seeing this thread, and from 660 to 761 is MISSING!:depress:

OH, and that is a cool hood. :beatnik:

[MOTOWN]

Same.
first time seeing this thread, and from 660 to 761 is MISSING!:depress:

OH, and that is a cool hood. :beatnik:

Thought I posted the dyno screen shot in this thread , @26psi i was praying it stayed together! :eek: didn't get a chance to video it.

http://i1020.photobucket.com/albums/af324/sims36/20140924_171816_zps9548c429.jp g

[sailsmen]

AWESOME!
You were running out of Chart. LOL

Thank you.

[Turbov6Bryan]

Very nice!
You plan to add fuel above 6300? Looking a little lean from there on up...

That thing outta rip pretty good!!

[MOTOWN]

Very nice!
You plan to add fuel above 6300? Looking a little lean from there on up...

That thing outta rip pretty good!!

No the tune is fine.

[justbob]

Thought I posted the dyno screen shot in this thread , @26psi i was praying it stayed together! :eek: didn't get a chance to video it.

http://i1020.photobucket.com/albums/af324/sims36/20140924_171816_zps9548c429.jp g


Scary once it runs into mid/upper 20's isn't it?! I'm jealous as hell seeing them rpms in the 7's! I was gonna shut down at 7,300, but that's what I get for gambling on a factory twin disc.. I guess that was a good thing as mine was set up for 28#s on the old owners set up and I would have made even more plus I don't have head studs.. [emoji50]

Awesome chart bro!


Builder Of Badassery

[MOTOWN]

Scary once it runs into mid/upper 20's isn't it?! I'm jealous as hell seeing them rpms in the 7's! I was gonna shut down at 7,300, but that's what I get for gambling on a factory twin disc.. I guess that was a good thing as mine was set up for 28#s on the old owners set up and I would have made even more plus I don't have head studs.. [emoji50]

Awesome chart bro!


Builder Of Badassery


Yeah i wish I would have installed head studs when i had this thing on the engine stand , I'll be over 800rwhp with a few more tweaks, but I think you will make more power than me once you get the right clutch in your ride.

[justbob]

Yeah i wish I would have installed head studs when i had this thing on the engine stand , I'll be over 800rwhp with a few more tweaks, but I think you will make more power than me once you get the right clutch in your ride.


Doubt that! I got the blower that could make 1,000+ easily but not the engine or the WANT to compete! It's all yours bud! [emoji106]🏻

I just want a street car and with only a 558 street tune on 93, she's MORE than enough!

Builder Of Badassery

[MOTOWN]

Doubt that! I got the blower that could make 1,000+ easily but not the engine or the WANT to compete! It's all yours bud! [emoji106]��

I just want a street car and with only a 558 street tune on 93, she's MORE than enough!

Builder Of Badassery

Honestly I built mines purely to chase numbers! , or break it! Lol , very true on the streets it's a beast , and more power than you need, you find yourself constantly tapping the brakes to avoid running something over.

[cer0413]

Honestly I built mines purely to chase numbers! , or break it! Lol , very true on the streets it's a beast , and more power than you need, you find yourself constantly tapping the brakes to avoid running something over.
cant wait to sit in the passenger seat. jb down, Motown to go :)

[MOTOWN]

Bring your popcorn, and a pamper brah!

[cer0413]

Bring your popcorn, and a pamper brah!
damn, a pamper lol?

[RubberCtyRauder]

damn, a pamper lol?

Well, that depends....:D
Did you see what I did there?:cool:

[lji372]

mmmmmmmmm
cuuuuuuuuurrrrrrrvvvvvvvvveeee eeeeeessssssssssssss

[chief455]

awesome graph, flat torque, so full of bigness :)

[JoeBoomz]

Haven't been on much, good to see this one finally complete and running. Impressive numbers, sounds wicked on the dyno!

This thread restores some of my faith in humanity :D

[sailsmen]

A lot of MADNESS!

Can't wait to see a burn out video or run down the drag strip.:)

[Lowndex]

Way too much power for me. I'll watch from the stands and toast your victory with my single barrel Jack.