Pics of 2nd Console Cover (Grey)

[vkirkend]

Attached are the pictures of the 2nd Console cover that was done in Grey Thread. This was installed in "Slayer1".

[Shaijack]

Kool and very nice work.

[SC Cheesehead]

Good stuff!

You have contact info for the guy Veron?

[fastblackmerc]

Good stuff!

You have contact info for the guy Veron?





I'd appreciate it if you could provide the info....

Thanks!

[MOTOWN]

That looks nice

[jflave]

Looks good, i like that. :)

[vkirkend]

Good stuff!

You have contact info for the guy Veron?

It's Tip Top Trim Shop in Magnolia, DE. PM me and I'll give you their information. Just so you know he made the cover(s) using my cracked one off my Black Marauder, I had the image added, then had him do the install. As you can see from my first post, it took a while to get the finished product. But I opted for better material and his work is good but it was not cheap. Both consoles with labor cost me about $250 without the stitching. The stitching was $20 each with a $50 initial setup fee.

[screamn]

When you say "better material", did you use leather for the new cover.....

Was our OEM center console cover originally made using vinyl?

BTW really looks good and one of a kind!!!!

The cost kinda was steep but hand made/custom always fetches a pretty $.

[ImpalaSlayer]

When you say "better material", did you use leather for the new cover.....

Was our OEM center console cover originally made using vinyl?

BTW really looks good and one of a kind!!!!

The cost kinda was steep but hand made/custom always fetches a pretty $.

im sure the stock one was vinyl. way too rubbery and cheap feeling to be leather

[marauder410]

thats looks soo awesome very nice quality, would love to do this to mine since is getting worn looking

[guspech750]

Impressive.


Sent from my iPhone
Eaton Swap + 4.10's = Wreeeeeeeeeedom!!

[CodeMan]

Outstanding!!!

[vkirkend]

When you say "better material", did you use leather for the new cover.....

Was our OEM center console cover originally made using vinyl?

BTW really looks good and one of a kind!!!!

The cost kinda was steep but hand made/custom always fetches a pretty $.

I was going to use leather but the shop owner advised against it. He said the leather would crease / wrinkle after some use. Her instead suggested that I use a vinyl that is much thicker than the original material and will hold up well to wear. I requested the beaded top with matching stitching and he double foamed the the underside so the console is VERY comfortable.

[SC Cheesehead]

I was going to use leather but the shop owner advised against it. He said the leather would crease / wrinkle after some use. Her instead suggested that I use a vinyl that is much thicker than the original material and will hold up well to wear. I requested the beaded top with matching stitching and he double foamed the the underside so the console is VERY comfortable.

Did you send him the whole bucket, or just the cover?

[martyo]

I like that!

[vkirkend]

Did you send him the whole bucket, or just the cover?

Just the top.

[loud2004marquis]

Very nice!

[DOOM]

DOOMIE likey! :2thumbs:

[NATEHAWK]

I like this. I have a strong elbow, when I drive my arm is there the whole drive. May look in to this mod.

[NATEHAWK]

Maybe he's willing to do a group buy to knock that price down some.

[vkirkend]

Maybe he's willing to do a group buy to knock that price down some.

I have called the shop to let them know more people may want one. I'm waitng for the guy to call me back. Or you can call yourself, their number is 302-697-6453.