Dual Fuel Pump Wiring

[NATEHAWK]

Here is a better way of running four wires down to your fuel pumps. Big thanks for Zack posting this on another site. Mine has already been ordered...Thought I would spread the luv....

Features:

4-Position bulkhead connector certified vapor-proof and leak tested
Teflon in-tank wiring compatible with most fuels
TXL automotive-grade external harness
This bulkhead connector wiring system brings four wires into a fuel tank while being fully tested vapor-proof (sealed). Each color-coded 14 gauge wire can handle 14 amps continuous and 20 amps intermittent duty. The in-tank harness is 16" long and Teflon coated which makes it compatible with gasoline, E85 and Methanol. The in-tank harness has a four-position connector at one end which plugs into the bulkhead connector. The other end is pre-stripped. These wires can be cut to any length and terminated as per the customer's requirements. The bulkhead connector fits through a small 10mm hole and is secured via a one-way stainless locking clip. The external harness is made of automotive-grade oil and gas resistant TXL 14 gauge wire which is 48" long and pre-stripped at one end. Nylon loom is used to protect the external harness.


http://www.racetronix.biz/itemdesc.asp?ic=BCWS-001&eq=&Tp=

http://www.racetronix.biz/mmWEBSTORE/Images/bwcs-001.jpg

[DOOM]

That's what I was telling you about! :beer:

Zack told me about that in Louisville. :up:

[NATEHAWK]

He posted this a while ago I just couldn't find the link and it slipped my mind....Order on the way now thou.