Instructions please

[Bowman9]

Does anyone have a scanned copy of the underdrive pulleys instruction sheet that they can post here?
I got my pulleys (two), but the instructions were missing.
My mechanic would like to see the instructions before he starts monkeying under the hood of my car, just to make sure everything is in order.

Thanks

[Logan]

Call Dennis, I'm sure he can fax them.

[LincMercLover]

It's pretty straight forward. The water pump simply unbolts and ya put the new one on. Just make sure the "bowl" of the pully is facing the engine block. Marty TIRED to pull a fast one on us in TX by flippin' his around so he could go faster or somethin'... :rolleyes:

Don't worry about the altenator pully. The crank is a little harder. You'll need to drop the coolant resevior and fan. Then you must lock up the tranny from movement. The only way I got it to do this is by getting a brake tool wedged in there and into the flywheel. The instructions say something about putting a 14mm wrench up in there on a nut, but I sure as hell didn't have a 14mm that'd fit and stay up in there. Next ya brake the crank pully bolt free, take it out and attach a crank pully puller. Pull her off, use the supplied bolt to press on the new one, then bolt down the new pully with the old bolt. Done.

[Bowman9]

I called Dennis yesterday and told him I was missing the instructions but he has not faxed them to me yet.
Does anyone else have a copy? My car goes in to the garage tommorrow.

[carfixer]

PM me your fax#. I have the instructions in front of me now.
I called Dennis yesterday and told him I was missing the instructions but he has not faxed them to me yet.
Does anyone else have a copy? My car goes in to the garage tommorrow.

[Bowman9]

Carfixer, I just PMed you with my fax number thanks :)

[Bowman9]

Thanks Carfixer, I just got your fax. :)

[TAF]

Thanks Carfixer, I just got your fax. :)
Ya gotta LOVE this place:beer: :banana: :coolman: :beatnik: :bows: :banana2:;) :D