turbo

[Turbomarauder]

I have a turbo on my marauder-can be seen at pro-turb kits-any others?

[TAF]

I'd be interested in seeing your "plumbing" of the exhaust. I went over a turbo idea with some of the "best & brightest" Ford Techs...and there was no room, except going under the K-member...which is a little "cheesy" in my book. (especially on a lowered car)

But...if you figured out a way...please share.

[martyo]

Where can they be seen?

[Turbomarauder]

I'll have to get something together and show it off.
I'd be interested in seeing your "plumbing" of the exhaust. I went over a turbo idea with some of the "best & brightest" Ford Techs...and there was no room, except going under the K-member...which is a little "cheesy" in my book. (especially on a lowered car)

But...if you figured out a way...please share.

[TAF]

So...did you go under the K-member?

[O's Fan Rich]

http://66.70.20.245/

No Marauder pics on there, Just Mustangs. (see below)
No Marauder Kits on there, Just Mustangs. (see below)
Might have the wrong site though. Unless you wanted us to see all the Mustang stuff.

OK, with the post below, I now see that there is a Marauder pic on there. Good start.

Ok, now I see the kit! http://66.70.20.245/store/scripts/prodView.asp?idproduct=78

[Bowman9]

http://66.70.20.245/gallery/pic.asp?iCat=13&iPic=28&offset=

I only found one picture of the engine bay.

[Black Terror]

This is same kit brought to our last Breakfast, would imagine the Exhaust System is the same.

[TAF]

This is same kit brought to our last Breakfast, would imagine the Exhaust System is the same.
I know...just seeing if anyone has figured out the exhaust/Kmember issue...

[Mad4Macs]

http://66.70.20.245/gallery/pic.asp?iCat=13&iPic=28&offset=

I only found one picture of the engine bay.

Did you read the caption on that pic?

"Description: 2004 Mercury Marauder kit, can you say look out for the cool looking 4 door family grocery getter?"
:flamer:

[looking97233]

Looking at the info. The tubing is all mild steel. To upgrade to Stainless cost $750.00. The kit does not come with a chip, programing or, injectors. The by-pass valve is plastic. And of course the filter is sucking hot engine bay air.

I don't mean to say this is a bad kit or a bad idea, just that by the time you get done, You will have spent much more than the listed kit price.