PDA

View Full Version : Setting code after trilogy # 231 install


drobin
06-12-2012, 11:35 AM
DOES ANYONE KNOW WHY, AND HOW TO FIX A CODE 1235 AFTER INSTALLING TRILOGY KIT # 231? HAS ANYONE EXPERIENCED THIS BEFORE AND WHAT ARE THE FIXES..???

ANY HELP WOULD BE APPRECIATED !!!!!

drobin (DONALD):bigcry::bigcry:
Black&Gifted
06-12-2012, 11:41 AM
what is the letter in front of the code?

P1235 is Fuel Pump Control out of Range

C1235 is Right Rear Wheel Speed Circuit Open or Shorted

If it is P1235, then I'd start with the boost a pump to make sure it is hooked up correctly, and then go from there.
Spectragod
06-12-2012, 12:13 PM
Did you get the code on startup, or did you make a WOT run and then got it?
drobin
06-12-2012, 02:24 PM
CODE HAS A "P" IN FRONT AND CAME ON AFTER 3rd START.

THANKS,
drobin (DONALD)
martyo
06-12-2012, 02:31 PM
Has the car been tuned yet?
drobin
06-12-2012, 03:07 PM
NO SIR, NOT YET..


drobin (DONALD)
drobin
06-12-2012, 03:13 PM
Did you get the code on startup, or did you make a WOT run and then got it?


NO WIDE OPEN THROTTLE YET, HAS TRILOGY TUNE BUT SET CODE AFTER 3 rd START UP.

drobin (DONALD)
martyo
06-12-2012, 04:12 PM
NO SIR, NOT YET..


drobin (DONALD)

Get the car tuned and have the tuner look at the code at the same time.
Spectragod
06-12-2012, 06:08 PM
I think Marty's right, it is a "fuel pump out of range" code, it could be a # of things, your tuner should be able to isolate it and most likely make the needed adjustments in the tune.

Alternately, I believe Lidio is still doing the tunes for Jerry's SC kits, you can contact him and see if it is something he can fix in the tune that was sent with the unit. If you need his email, PM me, I'll get it to you, he is very good about getting back to people via email, the phone doesn't work so well, as the shop is quite hectic during the day.
magindat
06-13-2012, 07:21 AM
Is the BAP at the right setting? Could be something so simple.

On Trilogy, BAP doesn't kick till boost triggers it, right?

That would lead me to believe there's a wiring issue if he's blowing a code before the BAP is asked to kick.
Spectragod
06-13-2012, 07:45 AM
It could be the BAP, mine was bad out of the box. The Hobbs switch is also adjustable, as opposed to just running the BAP continuous.
drobin
06-13-2012, 03:21 PM
HAPPY TO REPORT THAT ALL IS BACK TO NORMAL. SEEMS LIKE SOMEONE FORGOT TO REPLACE THE OEM FUEL PUMP WITH THE GT 40 PUMP I FURNISHED. ONCE DONE, RE-SET CODE AND ALL IS WELL ON TROUBLE CODE FRONT. TUNE COMING UP NEXT, SO STANDBY AND RESULTS TO FOLLOW.. I THANK EVERYONE FOR YOUR GENUINE CONCERN AND VALUED TIME AND ASSISTANCE OFFERED.

THANKS AGAIN,
drobin (Donald)

HELLO BARRY !!