Project Rolling Thunder (MM block swap onto mini truck)

[tdotcv]

I don't know if someone already posted this, but on PowerBlockTV they installed a MM engine and transmission on a Mazda truck. The eposides run from 2010-2012 so check out "Project Rolling Thunder" to find more episodes, cool stuff. In part 8, they replace the MM block with a supercharged cobra engine.

Here is are the links:
http://www.powerblocktv.com/player/show_player.php?ep_show=TK&ep_num=TK2010-06

http://www.powerblocktv.com/player/show_player.php?ep_show=TK&ep_num=TK2010-16

[2,4shofast]

I have watched all the episodes about this build, it is going to be a monster when it is finally complete.

[SGT_MERC]

I have followed this build from the beginning as well. The junk yard Marauder engine they put in the truck first had either a rod or main bearing knock and they proceeded to run the hell out of it, since it was the first stage of the build, they didn't care.

[breeze]

Marauder stock block with that S/C it won't last long.

[2,4shofast]

Marauder stock block with that S/C it won't last long.

Its a crate motor now, the Marauder block is done for good

[CWright]

Its a crate motor now, the Marauder block is done for good


What compression are they now running on the crate motor? I didn't have time to watch the entire episode.

[breeze]

Its a crate motor now, the Marauder block is done for good

Oh, they have so many episodes I forgot and miss them often

[2,4shofast]

What compression are they now running on the crate motor? I didn't have time to watch the entire episode.

I cant remember off hand but I believe it was an Aluminator with 8.5 compression

[CWright]

I cant remember off hand but I believe it was an Aluminator with 8.5 compression


Oh ok, Cool. He will def be ok with that Whipple at 8.5. That's the same compression I'm running. :burnout::burnout:

[justbob]

Been watching as well..

[Blk Mamba]

would be nice to have an unlimited budget, same thing with Stacy David's Gears.