Valve Covers

[ctrlraven]

Will ones from a 99 cobra fit our engine?

Everything looks the same, just wanted to make sure.
http://i63.photobucket.com/albums/h135/cobra0495/8f5a7870.jpg

[BODYMAN]

yep sure will!

[fastblackmerc]

I think the way the PCV mounts is different.

[Comin' in Hot]

they will but, I believe the PCV fitting locations are different

[Blackened300a]

PCV is different and the location of the breather on the drivers side is different. Its pretty much the same issues I tackled when I did my swap just the PCV grommet looks a little different and you won't be able to thread the Marauder style in so use a Mustang push in type and find a plastic 90* elbow from your local FLAPS along with a longer rubber hose like I did to run the breather tube into the intake on the drivers side.

[ctrlraven]

Awesome, getting this will help make the engine swap as easy as possible since the motor will basically be full long block now minus accessories.

[ctrlraven]

Locations are the same, but Paul you're right it is a push-on style PCV on the bottom VC in the pic. Thanks for pointing that out.

[BODYMAN]

PVC & hose arrangements is a non issue as you guys know. The Alluminator LB I bought had I think 99 32v valve covers on it so had to compensate for that but now Iam getting ready to swap back to a set of MM covers so back to way it was.I found it very supprsing that a person would change the blue FRPP covers for a set of black, to each there own one of the things that makes modding fun, do things the way you want.

[ImpalaSlayer]

birdman what did you do anyway? did it give up the ghost completely?

[ctrlraven]

birdman what did you do anyway? did it give up the ghost completely?
Not sure what you mean...