Mustang Accumulator Springs

[tbone]

Which Mustang accumulator springs are the ones they recommend for the MM that are a nice trade off from harsh shifts when removed to too soft with them in?

[Bradley G]

You may want to rethink the softer springs, the stall convertor is going to soften the shifts considerably.
I asked my guy what he thought and he said, I should use them if I want soft shifts 1-2 & 2-3.
Now they are so much softer than 3-4 and lock -up it rather humorus.
If you want to try the it feels with the soft shifts, It's all U daddy-O:P

[tbone]

Should I leave the springs out because the 2800 TC will soften the shifts....

[Bradley G]

I was not going to give you that advice, remember I told you no springs on the J mod and you felt the shifts were too hard at part throttle.
I like the soft shifts, it's just they don't match 3-4 and lock-up as far as firmness.
No biggie I'll take them out at the first pan drop, if I still feel the same.


Should I leave the springs out because the 2800 TC will soften the shifts....