Addco sway bar bushings

[MADRODER]

So it look's like the Marauders sway bar bushings are finally worn out, the sway bar measures 30.25mm and I was told it was a Addco sway bar from the previous owner. Does anyone know the part# and size I need. Your help will be greatly appreciated !!

[Green96]

I do not care for my Addco bushings. I am planning to replace them with energy suspension bushings, but I do not know the part number. I guess this was really no help at all...I will try to figure out the energy suspension number.

[bugsyc]

So it look's like the Marauders sway bar bushings are finally worn out, the sway bar measures 30.25mm and I was told it was a Addco sway bar from the previous owner. Does anyone know the part# and size I need. Your help will be greatly appreciated !!
Addco front sway bar #2196 rear #650

[fastblackmerc]

Greaseable Sway Bar Bushings - Energy Suspensions
Front – 9.5165 or 9.5172
Rear – 9.5161*

*NOTE: you will have to modify the rear clamp or bushing.

[MADRODER]

Thank you Gents !!

I was looking at Energy also and it looks like its better quality.

[Blackmobile]

Curious which one is correct for the MM.
9-5172R states: Mounting Bracket to Sway Bar is 1.25 in. and has a reference note: Common GM truck style.
9.5165R states: Mounting Bracket to Sway Bar is .750 in.
Also they have different Overall Sway Bar Bracket Height dimensions.???


Greaseable Sway Bar Bushings - Energy Suspensions
Front – 9.5165 or 9.5172
Rear – 9.5161*

*NOTE: you will have to modify the rear clamp or bushing.

[MADRODER]

I printed off Energy's templates with measurements, I'm going to have to measure them first before ordering.

[justbob]

I'll see if my empty box's are still around. Or check my thread a couple pages back in the "what did you do to your car today" thread (Early April date)

These all fit perfect, and I even found a perfect fitting set of ES rear pins, all bought locally at Autozone.

Sent from my Ally while ruling the world from my toilet.

[MADRODER]

That would be great !!:beer:

[Blackmobile]

Down loaded their catalog and it's looking more and more like 9.5165R. I might give them a try!

[justbob]

All I could find is the rear info for now.

Remember, this requires modifying for the bushing, but not the pins.

The Energy bushings needed for the rear ADDCO is 9.5161 RC and the rear links for factory or ADDCO is 9.8121 R

[Blackmobile]

Picked up 9.5165R from my local part store and installed. They are the correct replacements.