New numbers!

[RacerX]

This is today's run. One run, no changes and I just need to put the new, tighter belt on. Bit of slippage at the top end. I'm happy though considering everything is my own work including tuning on the dyno. :D

http://www.mercurymarauder.net/gallery/data/628/DYNO_460.jpg

[camelgrundle]

very nice! cant wait to get the rest of my kit.

[LANDY]

Looks good. That power is eaton swapped right?

[jflave]

Very good #'s nice work. :)

[RacerX]

Looks good. That power is eaton swapped right?
Yep! Heaton w/stock upper, 6lb lower, a little porting here and there. ;)

[Curless]

Very nice! A/F looks real good to!

[DOOM]

Nice numbers bro. :beer:

[kmastl]

What's wrong with your torque curve? There is no curve.

[RacerX]

What's wrong with your torque curve? There is no curve.
That's the beauty of my work! ;)

[breeze]

That's the beauty of my work! ;)

430lbs trq At 2600rpms not too bad. Would the lower have something to do with it?

[RacerX]

430lbs trq At 2600rpms not too bad. Would the lower have something to do with it?
The actual number, yes. The fact the the torque is a flatline I'm sure is due to my very meticulous porting of all parts over the last couple of years in preperation for a blower. :D

[breeze]

The actual number, yes. The fact the the torque is a flatline I'm sure is due to my very meticulous porting of all parts over the last couple of years in preperation for a blower. :D

How do the g-forces feel. :burnout:

[RacerX]

How do the g-forces feel. :burnout:
Ya know, I don't really recall. I take others for rides and they do the "Holy @#$!" thing, but, me, I'm listening to every sound the motor makes, the vibrations, etc. I need to be passenger for once I think! :D

[MOTOWN]

Very nice numbers!

[nh muscle]

Great job bill!!!!! Lots of hard work and small nicks and cuts and some bruises as well!!! I hope my headers and 2.8 pulley will allow me to keep up!!!

[guspech750]

Sweeeeeeet!!


Sent from my iPhone
Eaton Swap + 4.10's = Wreeeeeeeeeedom!!

[RacerX]

Great job bill!!!!! Lots of hard work and small nicks and cuts and some bruises as well!!! I hope my headers and 2.8 pulley will allow me to keep up!!!
Thanks! I'm not too much ahead and at this level, you need lots more too make enough of a difference to "walk away". I'm thinking 750hp... :D Maybe next year with the new(er) engine!

[Mike M]

What fuel pump are you using and what octane?

[RacerX]

A single GT40, BAP and 93. FP DC hit 0.437 and 9.625v at it's highest. 39lb injectors.

[NTHE10s]

Nice Numbers, Congrats

Rich

[dohc324ci]

Bill what is your setup again?

MMR Stroker or just built 4.6 street mod 600/900? Ported heads/intake/cobra cams right? Nice numbers sounds like its fun to drive!

[LANDY]

A single GT40, BAP and 93. FP DC hit 0.437 and 9.625v at it's highest. 39lb injectors.do you have the BAP at its max setting?

[MMBLUE]

Very nice Bill. I hope to see #'s like that when Landy is done with my hair dryer. ;)

[RacerX]

Bill what is your setup again?

MMR Stroker or just built 4.6 street mod 600/900? Ported heads/intake/cobra cams right? Nice numbers sounds like its fun to drive!
Hey Brian! Straight MMR 600. Flat tops for a 10.68cr, PnP heads/intake/cobra cams, ported Heaton, ported/welded Eaton elbow port matched to Glassman's old (now polished) dual 65BBK, FRPP shorties, cobra exhaust w/high flow cats and x-pipe out through the Magnaflows.


do you have the BAP at its max setting?

Yep. I have another MM FPDM and will get another GT40 FP at some point. That will most likely go in when I put the newer engine in (9.1cr) with my new ported heads, Crower stage 2's, SS valves, 60lb injectors and a VMP TVS to top her off.

[bugsyc]

Great numbers.You've been busy.You got yourself a hotrod...Any news for me???

[bugsyc]

Nice mods.You got yourself a hotrod.Wondering how that BBK compares with the big mouth SBTB...Also waiting to hear from you..SORRY ADMIN,Double post

[RacerX]

Dragon SBTB and elbow FTW! Packy on the way! :D