Log in

View Full Version : headers for marauder??



marauder004
07-24-2012, 02:38 AM
Hi.

How are you all?
I have mm2004 I search for headers short or long but I prefer short because art this time I don't have lots of money

Could you please lead me to company that made headers for marauders cheepi found kooks but it's expanceve.
:mad2:

yjmud
07-24-2012, 05:40 AM
Cobra Shorties can work if you want long tubes go with the stainless works much better

SC Cheesehead
07-24-2012, 05:48 AM
Shorty headers are cheaper than long tubes, but you'll need to purchase a mid-pipe to bridge the gap from the header outlet to the exhaust system, and you'll also want to install high flow cats if you want to take advantage of the improved exhaust flow.

Shorty headers will give you about an 18 to 25 hp increase with good mid-pipe and high flow cats.

Long tubes will give you 25+. If you're supercharged, that number will increase to closer to 50 if you go with a low restriction exhaust system all the way back.

dohc324ci
07-24-2012, 06:09 AM
JBA shorties for the Mach I will work. FRPP shorties are discontinued.

http://www.jegs.com/i/JBA/578/1625S-7JT/10002/-1?parentProductId=1236661

SC Cheesehead
07-24-2012, 07:25 AM
JBA shorties for the Mach I will work. FRPP shorties are discontinued.

http://www.jegs.com/i/JBA/578/1625S-7JT/10002/-1?parentProductId=1236661

Yup. Although you can occasionally find a used set on e-bay, craigslist, etc.

I've got a set of FRPP shortys on my car. If I were to do it all over again, I'd go with SW long tubes.

marauder004
07-24-2012, 08:35 AM
thanks all

I'm doing supercharger at this time

soo I need your help with the headers because all of my friends advise me to do it.

Raleigh Marauder
07-24-2012, 08:40 AM
thanks all

I'm doing supercharger at this time

soo I need your help with the headers because all of my friends advise me to do it.

This might be of interest....

http://www.mercurymarauder.net/forums/showthread.php?t=81124

marauder004
07-24-2012, 08:44 AM
also does the headers for marauder same of crown victoria?

yjmud
07-24-2012, 08:48 AM
no they are not

dohc324ci
07-24-2012, 09:23 AM
For the cost of JBAs go with stainless works they have a group buy going! I assume the SA doesnt care about smog....I would only go shorties if a carb EO is required like in California.

StainlessWorks
07-24-2012, 10:45 AM
For the cost of JBAs go with stainless works they have a group buy going! I assume the SA doesnt care about smog....I would only go shorties if a carb EO is required like in California.

Agreed!!!!!

Our SW Headers will hit the factory connection point for a fairly simple install. The improved volumetric efficiency of the motor will allow the supercharger to run at a lower psi for better efficiency, this making more power with less stress on the motor. Get in on the group buy and set your mind at ease, your getting the best out there!!

Link To SW Headers (http://www.stainlessworks.net/products/headers/mercury-marauder-2003-2004-headers.html)

http://www.stainlessworks.net/media/catalog/product/cache/1/image/5e06319eda06f020e43594a9c23097 2d/M/A/MAUCAT_headers.jpg

visionmercury
07-25-2012, 09:26 PM
Do the stainless works headers . U can't go wrong I'm beyond happy with them . I just posted pics and a video under the exhaust section . If u want to hear them it about 2 minto the video