The part out has begun.

[Blackened300a]

Some of you guys know that I acquired a 03 300B with heated seats recently. I was seriously debating about keeping the car, but the cost involved to get it done right far out weighs any value since the mileage is high and it would need body work, paint job, suspension work, and a engine. Even in 30 years, it wouldn't be worth anything after the investment of the restoration.

Right now the car has no nose on it. I carefully removed the entire front clip bolt by bolt and unplugged everything so nothing is hacked up or broken. Friday I hope to catalog most of the parts and start posting them up. The car was never hit so all of the front metal is OEM and straight and every little plastic filler panel is intact. This week I plan to start pulling the interior apart and then the entire drivetrain will be removed. The rear bumper, cowl, some of the harness, and long block are pretty much the only things I'll be keeping off this car, everything else is up for grabs.
I will be making a list and putting it up. Shipping the large items will be costly so much of the larger items will be local pickup or I can meet you somewhere.
Some of the parts that some members had interest in were the front bumper cover, front spindles, seats, door panels, head lights, tail lights, rear panel, fog lamps, over head console, lower steering column trim, trunk lid, cam covers, and 2 rims.
All of the engine accessories are in working order except the AC compressor clutch made some noise when turned on, everything else works.

I'll be updating this thread during the week.

[imorb1994]

What shape is the steering wheel in, and how about the other 2 wheels?

[maineiac]

you keeping the rear bumper cover,i need one.

[visionmercury]

shoot me a price on the wheels 2 or all 4 dont need the tires , and the console arm rest if in good shape. and the grill

[Raleigh Marauder]

I'd be interested in a price on the driver's side dot-matrix trim. Thanks...

[Ladyhawke]

Header panel.

[RacerX]

I'm sorry to hear that Paul. :(

[Shaijack]

How much for the car???? As is..

[SpartaPerformance]

How much for the car???? As is..

Not really a "car" anymore.

[Blackened300a]

you keeping the rear bumper cover,i need one.
Rear bumper cover is staying with me. I know how close to impossible it is to find one.


shoot me a price on the wheels 2 or all 4 dont need the tires , and the console arm rest if in good shape. and the grill
The arm rest as I recall is in good shape as is the grill. I'll get some pictures of the rims to you. I have two spare rims as well if you need a complete set. The tires are trashed due common center wear and bad alignment on the front.


I'd be interested in a price on the driver's side dot-matrix trim. Thanks...

I'll get back to you. It has the traction control button and adjustable pedal switch. Both work and the panel has a little worn paint on the left side. The piece itself is in perfect shape and no dents.


Header panel.

It will need to be painted since it has rock chips but it's complete and in one piece.


I'm sorry to hear that Paul. :(

That's ok, I'll be able to get my hands on a clean second marauder sooner or later. ;)


How much for the car???? As is..

The front end is in a hundred pieces. Between boxing all that up and shipping the car out, not worth it. Plus I always wanted to see how this car was put together and how to break it down for future reference.

[1stMerc]

How about the radiator cover?

[JoeBoomz]

Gauge pod for me please! Can you please PM your price shipped to Canada T2H1Z6?

[03knight]

dibs on back seat covers if available..pm sent

[stevengerard]

I'll take the airbag suspension leveling sensor

[Blackened300a]

How about the radiator cover?

Its in good shape. I have no hold down pins for it.

Gauge pod for me please! Can you please PM your price shipped to Canada T2H1Z6?

No prob. Gauges included?


dibs on back seat covers if available..pm sent
Pm replied.


I'll take the airbag suspension leveling sensor
No prob.

[LJ on 24's]

I will like the front bumper rear spoiler trunk carpet and plastic thats inside the trunk.

[Blackened300a]

I will like the front bumper rear spoiler trunk carpet and plastic thats inside the trunk.

Someone had asked for the front bumper and I'm still awaiting a response, if he dont want it, then you are next in line. The trunk carpet is a disaster and not worth the shipping cost of it. It has heavy wear marks and is filthy beyond cleaning, there is also no rear spoiler on this car.
Which plastic parts are you referring to? The side panels that cover the air suspension and inertia switch?

[Blackened300a]

What shape is the steering wheel in, and how about the other 2 wheels?

The steering wheel is in decent shape, I'll have to take another look to be certain. The steering wheel control buttons are worn and gummed up.

[Go2GuyFL]

Rear window if defroster works. I can arrange transportation when brother-n-law comes down from NY later (you met at MV9).

[Blackened300a]

Rear window if defroster works. I can arrange transportation when brother-n-law comes down from NY later (you met at MV9).

Rear defrost works. I'll try to get the window carefully removed.

[DWSTANG67]

I am looking for tail lights are they in good condition

[REAL4WD]

interested in the gauge pod if the sale doesn't go through.

[Raleigh Marauder]

Blackened300a,

I meant the trim piece on the door, not the one on the dash...:)

[TooManyFords]

I need the two larger wiring harness pigtails that connect to the turn signal multifunction switch, c202a and c202c. 3-6 inches of wire on each is plenty. It funny, you hang on to a complete wiring harness for months, finally scrap it all and then 2 months later you find you could have used a couple of the ends... (haha!)

[Blackened300a]

Blackened300a,

I meant the trim piece on the door, not the one on the dash...:)

I'm not sure if the trim on the door panels can be separated. I'll take a close look at it when I pull the interior out.


I need the two larger wiring harness pigtails that connect to the turn signal multifunction switch, c202a and c202c. 3-6 inches of wire on each is plenty. It funny, you hang on to a complete wiring harness for months, finally scrap it all and then 2 months later you find you could have used a couple of the ends... (haha!)

I'll have to dig a little deeper and go through the harness when I remove it. I'm planning on having nothing more then the roof and rear quarters sitting on a frame by the time I'm done.

[TooManyFords]

I'll have to dig a little deeper and go through the harness when I remove it.

Let me know if you need the instructions for getting at the pigtails. Takes about 5 minutes, a phillips, a T15 torx, a punch and a wire snipper!

[Blackened300a]

Let me know if you need the instructions for getting at the pigtails. Takes about 5 minutes, a phillips, a T15 torx, a punch and a wire snipper!

When I get to that point, expect a message asking for your number so I can pull the right harness.

[LJ on 24's]

The black piece that fit over the latch in the trunk.

[fastblackmerc]

I need the two larger wiring harness pigtails that connect to the turn signal multifunction switch, c202a and c202c. 3-6 inches of wire on each is plenty. It funny, you hang on to a complete wiring harness for months, finally scrap it all and then 2 months later you find you could have used a couple of the ends... (haha!)

Always... always cut of the connectors.....

[TooManyFords]

Always... always cut of the connectors.....

LOL, hindsight is 20-20!

[Speed]

Is the rear sway bar stock or aftermarket?

[Blackened300a]

The black piece that fit over the latch in the trunk.

OK, I'll check condition of it.


Is the rear sway bar stock or aftermarkert?

Pretty certain its stock.

[slickster]

Got a pic of the headlights? And price

[Blackened300a]

Got a pic of the headlights? And price

The headlights are original and need a wet sanding and compounding to remove the haze. The lens and assembly are in great shape otherwise. $150 shipped for the pair.

[J.bo]

How about the air pump for the rear?

[JoeBoomz]

No to gauges on the pod - just the pod please. It's going on the operating table to get a third hole for a third gauge and I don't want to risk screwing mine up :)

Also need complete engine and transmission wiring harnesses with all plugs from PCM. Or if parts are already sold we can cut if off but as far from the PCM as possible. This is for dad's cobra conversion.

[Rockettman]

What's the condition of the stock exhaust tips?

[Sully008]

Interested in the front springs if they're still good/available.

[slickster]

The headlights are original and need a wet sanding and compounding to remove the haze. The lens and assembly are in great shape otherwise. $150 shipped for the pair.

No thanks........

[crownvic05]

what color interior?

[cj7chris]

If the adjustable pedals work, I am interested in the brake pedal assembly.

[Odinson]

OOoooo hows the drivers seat? Any tears in the leather? If not I'll take it.

IF the driveshaft is an MMX (is it modded at all?) I'll take that to.

Could use rear passengers matrix trim too...

[Blackened300a]

How about the air pump for the rear?

I plan on hanging onto that.


No to gauges on the pod - just the pod please. It's going on the operating table to get a third hole for a third gauge and I don't want to risk screwing mine up :)

Also need complete engine and transmission wiring harnesses with all plugs from PCM. Or if parts are already sold we can cut if off but as far from the PCM as possible. This is for dad's cobra conversion.

No prob.


What's the condition of the stock exhaust tips?

Pretty good shape. I haven't really checked them out. Someone was interested in the exhaust


Interested in the front springs if they're still good/available.

They are good and available once I lay the car up.


what color interior?

Dark interior.

If the adjustable pedals work, I am interested in the brake pedal assembly.

Ok.

[Blackened300a]

OOoooo hows the drivers seat? Any tears in the leather? If not I'll take it.

IF the driveshaft is an MMX (is it modded at all?) I'll take that to.

Could use rear passengers matrix trim too...

Seat is spoken for, I haven't checked the driveshaft but I'm certain it's stock, I'm pretty certain the trim does not separate from the door panel and the rear panel is available if interested.

[imorb1994]

One other thing I would be interested in is the third brake light assy, if its not already spoken for

[Sully008]

I'll take them once you get a chance to remove them. Pm on it's way.

Quote:
Originally Posted by Sully008 http://www.mercurymarauder.net/forums/images/bgold/buttons/viewpost.gif (http://mercurymarauder.net/forums/showthread.php?p=1208292#post1 208292)
Interested in the front springs if they're still good/available.




They are good and available once I lay the car up.

[Odinson]

Seat is spoken for, I haven't checked the driveshaft but I'm certain it's stock, I'm pretty certain the trim does not separate from the door panel and the rear panel is available if interested.

DOH! Thanks anyway. on 1 &2. Hoping nobody thought of it and you already had one. :)

Sure what 'ya want for the rear passenger panel?

[Blackened300a]

One other thing I would be interested in is the third brake light assy, if its not already spoken for

You got it.

DOH! Thanks anyway. on 1 &2. Hoping nobody thought of it and you already had one. :)

Sure what 'ya want for the rear passenger panel?

Both rear or one? It's so nice to not have to ship things to you. :D

[REAL4WD]

is the gauge cluster spoken for already? if not I'm also interested in that.

[WhatsUpDOHC]

Paul -

I know that you want to mess with the cams but are the valve covers spoken for or available?

If available, just wondering what you would want for them.

Mark

[Blackened300a]

is the gauge cluster spoken for already? if not I'm also interested in that.

Gauge cluster is available.


Paul -

I know that you want to mess with the cams but are the valve covers spoken for or available?

If available, just wondering what you would want for them.

Mark

Hey Mark, cam covers are spoken for. I plan to compile a list pretty soon of what's already spoken for and what's available.

[southflavic]

How about the dash gauges?

[boatmangc]

How about the passenger front door inside panel. Don't need the window switches but I will take them, also passenger and drivers door window switch bezels from the front doors.

[Ladyhawke]

Paul, is the upper dash panel spoken for? You know the piece near the windshield.

[infantry_p71]

How much for the gauge pod gauges if they are still available

[REAL4WD]

Gauge cluster is available.


PM Sent regarding the cluster

[Blackened300a]

How about the dash gauges?

Spoken for.

How about the passenger front door inside panel. Don't need the window switches but I will take them, also passenger and drivers door window switch bezels from the front doors.
It's in good shape.

Paul, is the upper dash panel spoken for? You know the piece near the windshield.

Not in great shape. The section behind the steering wheel is deformed.


How much for the gauge pod gauges if they are still available

Spoken for, but still have the op and voltage gauges.

[sd8683]

Hi Paul, I need a passenger side rear window motor, not sure if you're parting out the doors though? Thanks, sean

[Go2GuyFL]

Passenger side front window switch.

[BCMARAUDING]

Hey, not sure if I missed it but what are the status of the rims? Floormats?

[OneBADLsE]

If anyone posted about it, front bumper is spoken for by me

[Blackened300a]

Hi Paul, I need a passenger side rear window motor, not sure if you're parting out the doors though? Thanks, sean

I'll remove whatever anyone wants. Im not sure if they are bolted like the F150 or riveted. I'll be sure to check it out.


Passenger side front window switch.
Not certain if it lights up and it was a bit lazy when I tried it. It may be the window motor that's tired


Hey, not sure if I missed it but what are the status of the rims? Floormats?
Floor Mats aren't worth stepping on and the rims are spoken for.

[Odinson]

You got it.


Both rear or one? It's so nice to not have to ship things to you. :D

Just the rear passengers is fine. TY.

Can you air mail that too me. :banana2::lol:

[boatmangc]

How about the passenger front door inside panel. Don't need the window switches but I will take them, also passenger and drivers door window switch bezels from the front doors.


PM Sent

[efi4eye]

How much for the trunk insert (whole reflector panel)?

[Blackened300a]

How much for the trunk insert (whole reflector panel)?

Spoken for already.

[babbage]

I'd like the 3 push pins that keep the radiator cover in place, and the (3) 30AMP big relays in the electrical box on the fender. How many miles on this MM?

[Embassy]

In what condition is the plastic panel that covers the radiator and its plastic sticker that details the belt routing?

[J.bo]

I need the rubber piece that goes in the fender in front of the air cleaner box. Also need the triangle plastic pieces that's on the inside door panel for the side view mirrors.

[Blackened300a]

I'd like the 3 push pins that keep the radiator cover in place, and the (3) 30AMP big relays in the electrical box on the fender. How many miles on this MM?
The push pins weren't with the car when I got it, no prob on the relays, and it's a little north of 200k on this car.

In what condition is the plastic panel that covers the radiator and its plastic sticker that details the belt routing?

Sold already.

I need the rubber piece that goes in the fender in front of the air cleaner box. Also need the triangle plastic pieces that's on the inside door panel for the side view mirrors.
You need the rubber that the air box rests on? That was completely worn out and the stud was all that remained. I have the triangle panel covers in good shape.

[dakslim]

Does the 300B have the remote fuel door button? If so, I need one.

[Blackened300a]

Does the 300B have the remote fuel door button? If so, I need one.

Nope, manual fuel door on this. Only the 300A.

[JoeBoomz]

When will you be responding to PM's and ready to ship parts?

[infantry_p71]

yes im interested in the lower gauges how much

[J.bo]

You need the rubber that the air box rests on? That was completely worn out and the stud was all that remained. I have the triangle panel covers in good shape.[/QUOTE]

I need the rubber that fits in behind the head light that feeds air to the air box. What you want for the triangle pieces?

[Go2GuyFL]

Not certain if it lights up and it was a bit lazy when I tried it. It may be the window motor that's tired.

Mine goes down but not up with the front passenger switch. Have to raise with driver's side.

[Blackened300a]

When will you be responding to PM's and ready to ship parts?

Right now


yes im interested in the lower gauges how much

PM on the way.


I need the rubber that fits in behind the head light that feeds air to the air box. What you want for the triangle pieces?

I have that, PM on the way.

[Ladyhawke]

Not in great shape. The section behind the steering wheel is deformed.

Never mind.

[Rockettman]

Are the stock exhaust tips infact sold?
(you mentioned earlier that the exhaust system may have been spoken for).
Thanks.

[bugsyc]

Would you have the right tail light harness??

[Changinlatitude]

I would be interested in all 6 outside door trim pieces if they are in good condition.

[Blackened300a]

I would be interested in all 6 outside door trim pieces if they are in good condition.

Ill have to check condition. Removing them can be a challenge since they are held on with adhesive.

[Ken]

I need one of the torsion bars that hold the trunk up. How hard will it be to reinstall it?

[Go2GuyFL]

Hood struts ... I use vice grips now to keep my hood from dropping when open.

[Blackened300a]

I need one of the torsion bars that hold the trunk up. How hard will it be to reinstall it?

No idea. I can see what's involved to remove it and let you know.


Hood struts ... I use vice grips now to keep my hood from dropping when open.

Spoken for. They are cheap enough to buy new.

[Bigdogjim]

WOW!! Paul this is almost as bad as working for a living:lol:

How about a picture when all the usable parts are removed?

[Blackened300a]

WOW!! Paul this is almost as bad as working for a living:lol:

How about a picture when all the usable parts are removed?

Here's my progress so far....
http://i32.photobucket.com/albums/d12/blackened300a/fefd6fc2.jpg
http://i32.photobucket.com/albums/d12/blackened300a/4d947d1f.jpg
http://i32.photobucket.com/albums/d12/blackened300a/752ebcb0.jpg
http://i32.photobucket.com/albums/d12/blackened300a/5c03abfa.jpg
http://i32.photobucket.com/albums/d12/blackened300a/8843c3e2.jpg

[Glenn-ho]

EATC? I need a good unit to send to FastBlackMerc. My EATC is acting up.

[Mebot]

Here's my progress so far....
http://i32.photobucket.com/albums/d12/blackened300a/fefd6fc2.jpg
http://i32.photobucket.com/albums/d12/blackened300a/4d947d1f.jpg
http://i32.photobucket.com/albums/d12/blackened300a/752ebcb0.jpg
http://i32.photobucket.com/albums/d12/blackened300a/5c03abfa.jpg
http://i32.photobucket.com/albums/d12/blackened300a/8843c3e2.jpg

dang thats what my marauder will look like soon :(

Sent from my handheld Zack Morris iShoe 4S.

[crownvic05]

Cluster with harness. How much?

[Blackened300a]

Cluster with harness. How much?

Sold already.

[Silver03Vic]

Didnt see it mentioned so maybe theres hope. What about the Long and short middle dash trim pieces ? Assuming theyre in ok shape.

[Blackened300a]

Didnt see it mentioned so maybe theres hope. What about the Long and short middle dash trim pieces ? Assuming theyre in ok shape.

I have them both. The short one has the TC and adjustable pedal switches which both work. The dot matrix is in good shape, just the paint on the edge is chipped off. It will need to repainted or touched up. The large piece has good paint but there are several dents in the dot-matrix where the 300a clock would have been.

[Ken]

How about the spare tire mounting bolt and nut.

[Blackened300a]

How about the spare tire mounting bolt and nut.

Sold already.

[Baconbit]

How about the license plate light housing?

[Blackened300a]

How about the license plate light housing?

You gotta be kidding! A guy picked up the tail panel and I insisted he take the license plate with it even though he didn't need it because I said "nobody is going to want just the lens". :lol:
I'll get in touch with him and see if he will send it out to you.

[Baconbit]

Haha nice, yea i need the small black plastic that the clear lens sits in. Thanks Paul---Russ

[Snake_Eyes]

How about the black plastic ring that holds the lighter into the gauge pod? Or the black rubber bushings on the taillight studs? Or (lastly) the studs that hold the backup light piece to the trunk lid?

[Spectragod]

Haha nice, yea i need the small black plastic that the clear lens sits in. Thanks Paul---Russ

Russ, I believe I have one of those sitting in my toolbox if you need it.

[Blackened300a]

How about the black plastic ring that holds the lighter into the gauge pod? Or the black rubber bushings on the taillight studs? Or (lastly) the studs that hold the backup light piece to the trunk lid?

Gauge pod was sold with that attached, the rubber bushings I may have off another set of taillights, the set with the car had damage behind them,and look about 4 posts back on the lens.

[sd8683]

I'll remove whatever anyone wants. Im not sure if they are bolted like the F150 or riveted. I'll be sure to check it out.


Hey Paul, I'm pretty sure they are riveted in there, not 100% positive though, I tore my door down a few month ago to get to the root of my issue, its the motor, might be a major PIA to do it but whatever haha. If its still available I'd love to snag it from you if the $$$ is right!

Thanks, Sean

[Blackened300a]

Hey Paul, I'm pretty sure they are riveted in there, not 100% positive though, I tore my door down a few month ago to get to the root of my issue, its the motor, might be a major PIA to do it but whatever haha. If its still available I'd love to snag it from you if the $$$ is right!

Thanks, Sean

I tore down most of the interior, I'll try to yank them out next week.

[Baconbit]

Russ, I believe I have one of those sitting in my toolbox if you need it.



Yea I tapped mine the other day to get the bulb on and it broke the black plastic...chalk that up to a stupid move

[sd8683]

I tore down most of the interior, I'll try to yank them out next week.

Thanks dude, let me know

[Snake_Eyes]

Gauge pod was sold with that attached, the rubber bushings I may have off another set of taillights, the set with the car had damage behind them,and look about 4 posts back on the lens.

Great! Please let me know if you have the bushings...can't get them from the dealer unless I buy the whole light assembly!

[Guittard22]

Off topic

There in a guy selling factory headers and catalytic converters removed from a 2004 Mecury Marauder with low miles . What would be a fair price for both ? , could it go on a crown vic ? Mine have seen better days :/

[Blackened300a]

Off topic

There in a guy selling factory headers and catalytic converters removed from a 2004 Mecury Marauder with low miles . What would be a fair price for both ? , could it go on a crown vic ? Mine have seen better days :/

???? :confused: you post this in here??

[Haggis]

???? :confused: you post this in here??

He's not the brightest blub in the lamp, the sharpest nail in the box and is five beers short of a six pack.

[Guittard22]

???? :confused: you post this in here??



Next time I pm you sorry about that .

[lttljp15]

price on both front window and door lock switches with the panel they sit in
price on wing if has one
shipping to 53154

[Blackened300a]

price on both front window and door lock switches with the panel they sit in
price on wing if has one
shipping to 53154

The driver side was spoken for, the passenger is available and no spoiler on this car.

[drac]

interested in the left hand dash trim piece, if it hasn't been sold yet. i read earlier in this thread that the long piece has some dents in it? do you have a pic by chance?

if i get the left hand piece, can i get a deal on the damaged right hand long piece by chance? (judging they haven't been sold)

[Blackened300a]

Here's the pics of the middle panel.
http://i32.photobucket.com/albums/d12/blackened300a/1db19d6b.jpg
http://i32.photobucket.com/albums/d12/blackened300a/b5524b52.jpg
http://i32.photobucket.com/albums/d12/blackened300a/1298d55a.jpg
http://i32.photobucket.com/albums/d12/blackened300a/227a3f98.jpg

[BATMANN]

Do you have the 2 dust covers that have the velcro access doors to change the fog lamp bulbs?

[Blackened300a]

Do you have the 2 dust covers that have the velcro access doors to change the fog lamp bulbs?

I'm not familiar with this part. I don't recall ever pulling something that even resembled that.

[fastblackmerc]

Do you have the 2 dust covers that have the velcro access doors to change the fog lamp bulbs?


I'm not familiar with this part. I don't recall ever pulling something that even resembled that.

There is only one dust cover and it's on the left side. Velcro on one side, stapled on the other.

[Billy]

Hey Paul,
Does it have a subwoofer or CD changer?
If so, shoot me a PM. Thanks.

[REAL4WD]

Positive Trader Feedback left. Thanks again for the Cluster!

[Blackened300a]

There is only one dust cover and it's on the left side. Velcro on one side, stapled on the other.

Then this car has neither and wondering where the hell the ones that are on my car went!

Hey Paul,
Does it have a subwoofer or CD changer?
If so, shoot me a PM. Thanks.

Has both, the bracket and harness for the SW are spoken for. The changer is available but but sure if it works.


Positive Trader Feedback left. Thanks again for the Cluster!

Thanks! Returning feedback!

[CrownVictorious]

how about just the harness for the cd changer? Also headlight switch still available?

[Blackened300a]

how about just the harness for the cd changer? Also headlight switch still available?

Harness for the changer is spoken for. The headlight switch is available.

[NATEHAWK]

Are the heated seats spoken for? If not what are the condition of them.

[Blackened300a]

Are the heated seats spoken for? If not what are the condition of them.

They are in great shape but spoken for.

[Torrey]

Hi, I have my car in Portugal, I am having a hard time getting anything, How much for fog lights, everything through the base parts order catalog is three times the cost.

[RocsMerc]

There's a small body clip that I'm missing that holds up the black triangle piece above the driver side door panel. It's been missing since i bought the car and it just flops around.

There's another part I need, but I'm not sure what it's part of or if it's even feasible to take off. The driver side window has a white plastic piece that's riveted to the glass. On my car that piece has a crack going through it that's gradually getting bigger with time. My glass sometimes comes off the track if I don't assist it when I close the window. If it's in good condition on this car, I'll take either the whole glass window with the piece riveted to it or the whole window motor track with the white plastic piece attached. I'm not sure what piece that thing is a part of.

[Blackened300a]

There's a small body clip that I'm missing that holds up the black triangle piece above the driver side door panel. It's been missing since i bought the car and it just flops around.

There's another part I need, but I'm not sure what it's part of or if it's even feasible to take off. The driver side window has a white plastic piece that's riveted to the glass. On my car that piece has a crack going through it that's gradually getting bigger with time. My glass sometimes comes off the track if I don't assist it when I close the window. If it's in good condition on this car, I'll take either the whole glass window with the piece riveted to it or the whole window motor track with the white plastic piece attached. I'm not sure what piece that thing is a part of.
I plan on pulling everything out of the doors so I have no problem putting these parts aside for you. I have plenty of these small clips as well. I have a hood with good paint on it too if you wanna see it.

[Blackened300a]

Hi, I have my car in Portugal, I am having a hard time getting anything, How much for fog lights, everything through the base parts order catalog is three times the cost.


The fog lamps are pretty pitted and cloudy, they would take quite a bit to restore. Still want them?

[KGIXXER7]

do you have the overhead grab handles? looking for the clips that the grab handles screw into. I know...big spender lol

[Blackened300a]

do you have the overhead grab handles? looking for the clips that the grab handles screw into. I know...big spender lol

The handles are gone already, BUT the clips remain! Ill see if I can dig them out.

[RocsMerc]

I have a hood with good paint on it too if you wanna see it.

I had my hood repainted about 4 months ago, but thanks for thinking of it.

[KGIXXER7]

The handles are gone already, BUT the clips remain! Ill see if I can dig them out.

i would appreciate it thanks

[Torrey]

Yeah, I am still interested, i have alot of time on my hands, what is your price?

[hugojax]

Whats the deal on the piece that the arm rest sits in?

[bugsyc]

Do you have the outside mirror switch???or the whole drivers side control panel??

[Blackened300a]

Yeah, I am still interested, i have alot of time on my hands, what is your price?

I'll send a PM in the morning.


Whats the deal on the piece that the arm rest sits in?
Goes with the entire console which is still available.


Do you have the outside mirror switch???or the whole drivers side control panel??

Someone showed interest in this, I'll send a reminder PM otherwise it's available again.

[bugsyc]

OK,just let me know

[Torrey]

Hey bro, are the fog lights still available?

[Mw 2309]

You have rear spoiler I'll take it if it's black thank kev

[RubberCtyRauder]

If you have the connector and wiring for the center clock that fits in the dot matrix trim let me know, I have the trim piece and the clock but no connector/wire.

Thanks

[Blackened300a]

Hey bro, are the fog lights still available?
Fog lamps available. Sorry been quite busy lately!

You have rear spoiler I'll take it if it's black thank kev
No rear spoiler on this car.

If you have the connector and wiring for the center clock that fits in the dot matrix trim let me know, I have the trim piece and the clock but no connector/wire.

Thanks

It's a 300b with no clock.

[crownvic05]

Still interested in the tail pipes with out tips if still available. Must be from right behind the muffler and include the curve. Let me know of a price shipped to 07304, thanks

[Mercury]

Looking for the vent cover that goes across the windshield right below the wipers. If it is available and undamaged I am very interested.

Thanks!

[mylow907]

I have been looking for drivers door panel or at least a main window switch.and drivers side mirror..

[Curless]

P.M. sent regarding parts

[Blackened300a]

Still interested in the tail pipes with out tips if still available. Must be from right behind the muffler and include the curve. Let me know of a price shipped to 07304, thanks

I'll have to check where I cut them. I cut off the tips and cut the pipes at the mufflers but not sure if I cut it in two pieces to remove or I was able to sneak them out. I'll have to get back to you on that.




Looking for the vent cover that goes across the windshield right below the wipers. If it is available and undamaged I am very interested.

Thanks!
I have it and it's in good shape. I'll have a look at it tomorrow to make sure.

I have been looking for drivers door panel or at least a main window switch.and drivers side mirror..

Door panel was sent out and window switch is spoken for. I do have a mirror though if still interested.


P.M. sent regarding parts

Received and will check which one I still have. One was sent out but not sure if DS or PS. It's been a while since it was removed and sent out.

[Torrey]

[QUOTE=Blackened300a;1217599]Fog lamps available. Sorry been quite busy lately!


Hey i'm still interested in the fog lamps, just PM me a price, and I can go from there.

[crownvic05]

Let me know about the tail pipes.

[bugsyc]

Power mirror switch???available?

[maineiac]

drivers seat?

[Mebot]

drivers seat?

Where do you live? I have driver seat & passenger seat but i prefer local pickup (CAM area)

Sent from my handheld Zack Morris iShoe 4S.

[WhatsUpDOHC]

What shape are they in?

Sent from my DROID RAZR using Tapatalk 2

[Mebot]

What shape are they in?

Sent from my DROID RAZR using Tapatalk 2

Over all very good considering 108k miles.

Also fyi these are 300a seats so no heat.

Sent from my handheld Zack Morris iShoe 4S.

[WhatsUpDOHC]

Thanks for the reply.

I'm just thinking that I should stockpile the skins for the future.

Sent from my DROID RAZR using Tapatalk 2

[Sully008]

Hi Blackened300a,

Is the Blower control module still available?

[fastblackmerc]

Hi Blackened300a,

Is the Blower control module still available?

If Paul doesn't have one I have a repaired BCM I can send you.

[Blackened300a]

Hi Blackened300a,

Is the Blower control module still available?

Yes it is and it was working when I pulled the car apart. PM me if interested.

[Sully008]

Paul and FBM,

Thank you both for the offer. I'm going to the wreckers today to see if I can find one locally first. If not, I be contacting one of you for sure.

[bugsyc]

Hey Paul,Do you have the cap for the power steering resevoir???Also a 90 degree pvc valve???I can't find one...

[fastblackmerc]

Paul and FBM,

Thank you both for the offer. I'm going to the wreckers today to see if I can find one locally first. If not, I be contacting one of you for sure.

The one you get from a recycle yard might not work.

[Blackened300a]

Hey Paul,Do you have the cap for the power steering resevoir???Also a 90 degree pvc valve???I can't find one...

I have both, but the cap will include the reservoir with it.

[Sully008]

The one you get from a recycle yard might not work.

This is true. I did get one from the recycle yard, but I haven't had a chance to try it yet. Part looks practically brand new, and for $5 and about 10mins. of my time, I'll take the gamble for now.:D

[fastblackmerc]

This is true. I did get one from the recycle yard, but I haven't had a chance to try it yet. Part looks practically brand new, and for $5 and about 10mins. of my time, I'll take the gamble for now.:D

Good Luck!

[Mest30]

How much for a motor behind the glass of a drivers side mirror. And if available, do you know if it'd for a 2000 marquis?

[WhatsUpDOHC]

Paul

What shape are the driver/passenger visors in?

Sent from my DROID RAZR using Tapatalk 2

[1BADP74]

Hey is the complete intake manifold for sale? Thanks Ed

[Blackened300a]

How much for a motor behind the glass of a drivers side mirror. And if available, do you know if it'd for a 2000 marquis?
I still have it but the entire mirror will go with it. The exterior is a little beat to hell but the motor works, glass is clean and the heater element works too. $25 shipped its yours.


Paul

What shape are the driver/passenger visors in?

Sent from my DROID RAZR using Tapatalk 2

Good shape. No rips and clean. Even the airbag stickers are still in great shape on them.


Hey is the complete intake manifold for sale? Thanks Ed

Sold already, sorry.

[montyd]

how about the cam covers?

[STEPS]

I didn't read all the post but I need a driver side headlight let me thanks

[Mercury]

Hi Paul,

Are the calipers still available? I'm looking for both sides front and rear with the brackets. Shipping would be to 03301.

Thanks!
Bob

[Blackened300a]

how about the cam covers?

Sold already


I didn't read all the post but I need a driver side headlight let me thanks

I have the headlight but it will need a little TLC on the lens.

Hi Paul,

Are the calipers still available? I'm looking for both sides front and rear with the brackets. Shipping would be to 03301.

Thanks!
Bob

I have all four with brackets. PM me if interested.

[wizkiddrummer]

Lower radiator/core support shipped to 59101. If you do have it, I have yet to check for price new to see if it would be wiser to go that direction. I'll have to check Monday if I have time.

[Blackened300a]

Lower radiator/core support shipped to 59101. If you do have it, I have yet to check for price new to see if it would be wiser to go that direction. I'll have to check Monday if I have time.

Give me a little more detail on this part. Is it the tray the rad sits in which is basically a U shaped angle held in by 4 bolts or is it something different?

[wizkiddrummer]

Give me a little more detail on this part. Is it the tray the rad sits in which is basically a U shaped angle held in by 4 bolts or is it something different?
Yes, that one.

[MARAUDER4909]

do you still have both rear axles..? I really only need one but how much shipped to 60453 thanks

[Blackened300a]

do you still have both rear axles..? I really only need one but how much shipped to 60453 thanks


I do, but I would suggest brand new axles instead of worn out used ones.

[SID210SA]

Another member here (dave) doesnt have a computer and asked me to find a couple of trim pieces for him....

He is looking for the triangles on both doors inside of the mirrors and the screw cover for the passenger door behind the door handle.

I too didnt look thru all 12 pages so forgive me for not doing so.

Mike

[Blackened300a]

Another member here (dave) doesnt have a computer and asked me to find a couple of trim pieces for him....

He is looking for the triangles on both doors inside of the mirrors and the screw cover for the passenger door behind the door handle.

I too didnt look thru all 12 pages so forgive me for not doing so.

Mike

There are two triangles. There is the one that clips to the very top of the inside door panel and there is a bigger second one that covers the access holes to remove the mirror. I may still have all four, ill have to check to make certain. Which ones exactly is he looking for?

[AzMarauder]

Is the factory exhaust in good shape?
H-pipe ?

[wizkiddrummer]

Any info on that lower radiator/core support piece?

[Blackened300a]

Is the factory exhaust in good shape?
H-pipe ?

The H pipe and cats are all connected and in good shape. Just shipping it to Arizona may be quite expensive and will require a huge box.


Any info on that lower radiator/core support piece?

Yep, I still have it, I just have to unbolt it from the frame. PM me a offer.

[marauder410]

would you happen to have just the bottom passenger side cushion still availible for sale or is long gone because in throwing an airbag light code 16 and ben told my couple memebrs they have had same problem and its the sensor in the passenger front seat bottom cushion is what i need??

if so blackeneed can you please send me a PM please thnaks again

[Blackened300a]

would you happen to have just the bottom passenger side cushion still availible for sale or is long gone because in throwing an airbag light code 16 and ben told my couple memebrs they have had same problem and its the sensor in the passenger front seat bottom cushion is what i need??

if so blackeneed can you please send me a PM please thnaks again

The passenger seat is spoken for.

[bugsyc]

Paul.You may be my last hope. I need the fuse box under the hood.I hope you have one..I need it.Please get back to me about price..thanks bugsy

[bugsyc]

Do you have the plastic lens or bulb holder for the trunk??

[MADRODER]

would have the front and rear Mercury badges ?? if so how much to ship to Ontario, Canada L2R-4N7

Cheers !!

[Merk em 03&04]

was interested in the dot matrix trim on the dash, both drivers side and passenger, thanks for ur time

[Blackened300a]

Paul.You may be my last hope. I need the fuse box under the hood.I hope you have one..I need it.Please get back to me about price..thanks bugsy

I sold that with the entire wiring harness


Do you have the plastic lens or bulb holder for the trunk??
Sorry sold.


would have the front and rear Mercury badges ?? if so how much to ship to Ontario, Canada L2R-4N7

Cheers !!
The rear badge was on the trunk lid I sold and the front badge was on the front grill which I also sold.


was interested in the dot matrix trim on the dash, both drivers side and passenger, thanks for ur time

I have the matrix that runs across the center of the dash, but the side piece with the pedal switch was sold.

[MEvans043]

Do you have door trim, door handles, or mirror caps?

If so how much?

[Ngreen0807]

I second on the door trim if Morgan doesn't take it.

I've been looking for a set for quite some time.

[Blackened300a]

Do you have door trim, door handles, or mirror caps?

If so how much?

Are you referring to inside or outside door handles? All other items have been sold already.


I second on the door trim if Morgan doesn't take it.

I've been looking for a set for quite some time.


The door trim is part of the door panel. They can't be separated and the door panels have been sold.

[MEvans043]

I think you misunderstood, we're talking about the exterior door trim pieces.

Like so:http://autobestpics.com/img/Mercury-Marauder4.jpg

And I need the exterior door handles if still available. I want to make may car look more like a Sport.

[Blackened300a]

The handles i may be able to remove, the trim is not going to be easy to remove without damaging them.

[Ngreen0807]

Yes that is correct. They can be removed with some fishing line or similar to cut the adhesive.

Let me know how much you'd like. Thank you.

[Merk em 03&04]

i pm u on the dash trim piece, not sure if it went thru tho, would like a price shipped to 48708, thanks for ur time

[1tsamarauder]

hey man, are the two headlights still available? thank you!

[1tsamarauder]

hey are the headlights stilll available?

[Blackened300a]

hey are the headlights stilll available?

Yes they are. They will need a little TLC, they have some haze on them but all the mounting tabs are intact and are ready to mount. The bulbs inside still work as well.
PM me if interested.

[Merk em 03&04]

how much for the dash trim?

[BATMANN]

Do you have a front turn signal harness laying around by any chance?

[JamieDrake]

Is there a chance you have the front left fender available? If so how much and shipping to L3V 6L7 Canada?

[Blackened300a]

Do you have a front turn signal harness laying around by any chance?

Sorry, sold.

Is there a chance you have the front left fender available? If so how much and shipping to L3V 6L7 Canada?

Sold as well.

[Ngreen0807]

Pm sent for door trim... Thank you.

[Blackened300a]

Pm sent for door trim... Thank you.

I really feel that I'm going to end up destroying the trim trying to remove it and ruin a entire door in the process. I think I'm going to leave the trim on the door and offer them complete.

[Ngreen0807]

Alright. Thanks anyway!

[MEvans043]

Did you receive my last PM?

[BATMANN]

Do you have the dust covers that go under the front bumper?

[03MARAUD3R]

Hello I was wondering if you still have the headlight switch

[Blackened300a]

Did you receive my last PM?

Yes responded


Do you have the dust covers that go under the front bumper?

Sorry they were sold


Hello I was wondering if you still have the headlight switch

No, that was sold as well.

[Mercury]

Hey Paul,
I've PM'd you a couple of times but have not heard back from you. Have you had a chance to pull those caliper brackets off for me yet?
Thanks,
Bob

[F2F]

Did it have a spoiler

[Blackened300a]

Did it have a spoiler

No, check out Sparta performance a vendor on the site for a new OEM spoiler.

[sflrainmaker01]

I don't know what's left, but here are some things I could use:

Left front marker/turn signal light housing
Stock stereo/amps/speakers complete setup
spare tire/wheel and cover
fuse block cover
I prefer the stock looking 3" tips over the 4" on the car now...
rear package tray
bottom rear seat (dark gray)
EATC if it was working...
Upper windshield trim
Owners manuals etc...
It would need to come to 33905.

Thanks.

[F2F]

No, check out Sparta performance a vendor on the site for a new OEM spoiler.

Done, thanks

[Blackened300a]

I don't know what's left, but here are some things I could use:

Left front marker/turn signal light housing
Stock stereo/amps/speakers complete setup
spare tire/wheel and cover
fuse block cover
I prefer the stock looking 3" tips over the 4" on the car now...
rear package tray
bottom rear seat (dark gray)
EATC if it was working...
Upper windshield trim
Owners manuals etc...
It would need to come to 33905.

Thanks.

I have the signal lamp.
I have the speakers, radio, but no sub and amp.
No spare
I don't have the fuse cover, it went with the harness
Tips are gone,
I may have the tray, Ill have to look
I have the rear bottom seat cushion
I have the EATC and it was working but I suggest a O ring replacement due to age and mileage.
Upper trim in the interior or the exterior surround?
I believe I have a manual with it.

We can work with shipping,

[BATMANN]

Do you still have the dust covers that go under the front bumper?

[sflrainmaker01]

I have the signal lamp.
I have the speakers, radio, but no sub and amp.
No spare
I don't have the fuse cover, it went with the harness
Tips are gone,
I may have the tray, Ill have to look
I have the rear bottom seat cushion
I have the EATC and it was working but I suggest a O ring replacement due to age and mileage.
Upper trim in the interior or the exterior surround?
I believe I have a manual with it.

We can work with shipping,






shoot me some pricing. Shipping would be to 33905 (Ft Myers). I think I already have the drivers side lamp secured.

My EATC just blows thru defroster, so I guess it isn't any better than the one you have.

The upper trim is the outside of the windshield. I have a piece of trim I just found in the trunk, which might be the piece I need. Speaking of trunk, is your decklid available? I assume front and/or rear covers are sold.

[Blackened300a]

Do you still have the dust covers that go under the front bumper?

I may, I'll have to look.


shoot me some pricing. Shipping would be to 33905 (Ft Myers). I think I already have the drivers side lamp secured.

My EATC just blows thru defroster, so I guess it isn't any better than the one you have.

The upper trim is the outside of the windshield. I have a piece of trim I just found in the trunk, which might be the piece I need. Speaking of trunk, is your decklid available? I assume front and/or rear covers are sold.

I sold the trunk lid and even if I had it, shipping would be outrageous from NYC to FL.
What do you mean by front and rear covers?

[Mebot]

bumper covers maybe?:confused:

sent from space

[fastblackmerc]

My EATC just blows thru defroster, so I guess it isn't any better than the one you have.


I can repair your EATC. PM me for the details.

[Guittard22]

Have the plastic long cover ? When you pop the hood you see a long black plastic cover that covers up the hole wells to the lights and has the sticker to what kind of oil that's used in the mm

[sflrainmaker01]

bumper covers maybe?:confused:

sent from space

Exactly. Sorry for the confusion.

[sflrainmaker01]

I can repair your EATC. PM me for the details.

Ok cool. Thanks!:banana: I guess that should be a little higher on the priority list. You know, it gets a little toasty down here! LOL.

[Blackened300a]

Have the plastic long cover ? When you pop the hood you see a long black plastic cover that covers up the hole wells to the lights and has the sticker to what kind of oil that's used in the mm

That was one of the first pieces sold


Exactly. Sorry for the confusion.

I sold the front and I'm keeping the rear.

[sflrainmaker01]

I have the signal lamp.
I have the speakers, radio, but no sub and amp.
No spare
I don't have the fuse cover, it went with the harness
Tips are gone,
I may have the tray, Ill have to look
I have the rear bottom seat cushion
I have the EATC and it was working but I suggest a O ring replacement due to age and mileage.
Upper trim in the interior or the exterior surround?
I believe I have a manual with it.

We can work with shipping,

So, can you give me pricing on bottom rear seat, manual and factory radio/speakers (individually please) shipped to 33905. Thanks!

[1Marauder]

http://www.mercurymarauder.net/forums/attachment.php?attachmentid=33 777&d=1365674705 (http://www.mercurymarauder.net/forums/attachment.php?attachmentid=33 777&d=1365674705)

How about the exhaust resonators??? Do you still ahve these???

[Blackened300a]

So, can you give me pricing on bottom rear seat, manual and factory radio/speakers (individually please) shipped to 33905. Thanks!

I have to get down to my shop and gather everything up and see what kind of shipping costs I'm looking at.


http://www.mercurymarauder.net/forums/attachment.php?attachmentid=33 777&d=1365674705 (http://www.mercurymarauder.net/forums/attachment.php?attachmentid=33 777&d=1365674705)

How about the exhaust resonators??? Do you still ahve these???

Those don't look stock. There were rubber pieces on the stock mufflers but they are gone.

[dncconcepts]

hello i was wondering if you had any front bumper covers or any over head console pieces like the mount that hold the actual piece thanks for your time

[cgh0187]

What are the odds you still have the console and floor shifter? I know that one guy was asking about the console, but it wasn't clear if he acted or not. Thanks for your time!

[ARodmarauder]

Do you still happen to have the switch covers? Mine are broken both fronts I'll take them with the switches if that's the only way you would sell them.

[Blackened300a]

hello i was wondering if you had any front bumper covers or any over head console pieces like the mount that hold the actual piece thanks for your time

I do have the long overhead console and mount. Someone had express interest in it so I'm awaiting his reply. You are second in line if he passes.


What are the odds you still have the console and floor shifter? I know that one guy was asking about the console, but it wasn't clear if he acted or not. Thanks for your time!
The console is gone. I believe I still have the shifter mechanism if you could use that.


Do you still happen to have the switch covers? Mine are broken both fronts I'll take them with the switches if that's the only way you would sell them.

Are you referring to front door window switches? I believe I still have both sides. I'm trying to recall condition of them. Ill be at my shop all day Saturday so I can check everything out and get back to you on it.

[ARodmarauder]

Yeah the front switches and the trim piece

[cgh0187]

You got a price on the shifter? Also, would you happen to have the plastic trim for the steering column that would cover the column shift hole? I want to do a floor shift swap on a CVPI. Let me know.

[RoyLPita]

Is the PCM available?

[Mebot]

You got a price on the shifter? Also, would you happen to have the plastic trim for the steering column that would cover the column shift hole? I want to do a floor shift swap on a CVPI. Let me know.

if Paul doesnt have the plastic trim for the steering column, I do. send me a PM if interested

sent from space

[Black Machine]

Light Control Module?

[Black Machine]

LIGHT cONTROLL mODULE?

[Mebot]

check with FastBlackMerc (FBM) for the lighting control module (LCM).

sent from space

[Blackened300a]

Yeah the front switches and the trim piece

Ill get some pics.


You got a price on the shifter? Also, would you happen to have the plastic trim for the steering column that would cover the column shift hole? I want to do a floor shift swap on a CVPI. Let me know.
I believe I do have that still, Ill have to take a look for it


Is the PCM available?

Yes, I forgot the code for it at the moment

[1Marauder]

I need the entire cold air/air intake unit. Do you have?


Sent from my iPad using Tapatalk HD

[Blackened300a]

I need the entire cold air/air intake unit. Do you have?


Sent from my iPad using Tapatalk HD

Just sold it last week.