Trilogy 238 complete

[Cougar_Marauder]

I finally got 'Project M' done! I installed Trilogy #238, painted my calipers and cam covers, added SS brake lines, did the rear cylinder cooling mod (from MuscleMerc), and did the upgraded fuel filter mod (also MuscleMerc). I also took the idea from Seige to feed the heater core from the rear cooling mod and deleted the hose that wrapped around the passenger side manifold. I used a 3.2" billet blower pulley and the quick change hub pulley (stock size.....for now) from metco. I haven't gotten a custom tune yet so Lidio said to run the stock air box with the smaller pulley but I have the JLT CAI and a SCT 2600 MAF to go on when I do. And custom painted coil covers (from my lovely girlfriend). :beer:

[RacerX]

Nice look! I like everything except the cop covers. Cool design with the skull and pistons, but, I don't like the blue mercury waves. Maybe get rid of those and do a PC clear over the skull? JMO! :D
:beer:

[Dr Caleb]

Love the stainless lines and blue wire looms.

After I got done mine I thought with all the hoses, I thought I shoulda done that. But what would I have to do next spring, eh? ;)

[justbob]

You may be able to get by with the CAI because the Trilogy lower is already a +1 if I remember correctly. 7 5/8"?? If true, you will already be a pound or so low on boost. Also if you haven't yet purchased an AFR wideband DO SO.

Did you give the FRPS a boosted reference?


Sent from my iPhone using Tapatalk

[SC Cheesehead]

Nice!

So, does that mean you're coming to Marauderville, now? ;)

[Cougar_Marauder]

Love the stainless lines and blue wire looms.

After I got done mine I thought with all the hoses, I thought I shoulda done that. But what would I have to do next spring, eh? ;)

The SS covers were a huge pain, and the fancy hose clamps were even worse! but in the end I like the look. If you decide to do it send me a PM for details.



You may be able to get by with the CAI because the Trilogy lower is already a +1 if I remember correctly. 7 5/8"?? If true, you will already be a pound or so low on boost. Also if you haven't yet purchased an AFR wideband DO SO.

Did you give the FRPS a boosted reference?

Sent from my iPhone using Tapatalk

Sorry, I'm new to the world of awesomeness. FRPS..is that fuel rail presser sensor? I'm not sure what you mean?

I don't have a AFR wideband yet... I wanted to go with dual aeroforce gauges... can I get AFR wideband with them at all?


Nice!

So, does that mean you're coming to Marauderville, now? ;)

even though I could make it there in half the time I still wont be able to go :(

[MMBLUE]

Looks good. Enjoy the new found power :banana2:

[DOOM]

Very nice! Welcome to the world of boost! :burn: :burnout:

[SC Cheesehead]

even though I could make it there in half the time I still wont be able to go :(

Ratfarts!

Too bad. Say hi to the folks, and maybe we'll see you guys in Looseville next spring.

[bugsyc]

Great looking engine bay.Is that a rear head cooling mod I see with the stainless hoses???If so,Where did you get it??The fittings are off the hook...

[Vortech347]

Nice. But for the love of God ditch the blue import wiring loom

[Rockettman]

Awesome job. Looks great.
(I've got to agree with "Vortech347" above...loose the blue wiring loom). sorry.

[StainlessWorks]

Great looking build!

[bugsyc]

How long did it take from start to finish???I really like the braided lines...

[Murked03']

Ohh so nice another marauder with a successful trilogy bypass surgery enjoy the boost stay away from "smokie tha bandit"

[GAMike]

Trilogy# 73 Says :wave::drive:

[fastblackmerc]

Nice. But for the love of God ditch the blue import wiring loom


Awesome job. Looks great.
(I've got to agree with "Vortech347" above...loose the blue wiring loom). sorry.


Nice build...


Not a fan of the blue wire loom either. Maybe if it was a darker blue.

[Hadamustang1]

Nice. But for the love of God ditch the blue import wiring loom


must have hurt his feelings he bailed,,

[Odinson]

Sweet. I like it.

Let us know when you finally pull over for a break.

[Cougar_Marauder]

How long did it take from start to finish???I really like the braided lines...

Thanks everybody! It took me almost 3 months to finish, but I did a few extra things and did a lot of painting too. I was picking up a ton of overtime at work so I really only worked on it before after work, but still a lot of hours for me.




Nice build...


Not a fan of the blue wire loom either. Maybe if it was a darker blue.


Hehehe, I get where everybody is coming from on the looms! I think it looks better in person (darker would be better but couldn't find) also I think it will look better when it is all done, I am going for a black & blue theme. I still have the blue JLT cai to go on and some blue accents on my brushed aluminum caps and door sills...and maybe some blue ghost stripes or something like that someday. One thing is for sure, I'm not messing with those looms again for a very long time!

[DOOM]

Keep us posted!

Want to see your dyno numbers!

[Cougar_Marauder]

Keep us posted!

Want to see your dyno numbers!


Me too! I plan on taking her in this spring for a a full dyno/custom tune. Then new tires :burnout:
I hope to find the time to get more into the local drag racing scene too.

[justbob]

Three months!!😯

Four nights after work here! < Had to. 😊


Sent from my iPhone using Tapatalk