Complete Eaton Swap $2900 with all the little bits

[Chris C.]

One of the members here saw my ad on the mustang board and I know it is my seconded post. But I am a long time lurker by following your eaton swap threads. If it wasn't for this website I would of aqcuired all this stuff.

So here we go

I don't like installing dirty things, so everything has been cleaned or refurbished or leaked checked.

The eaton has been rebuilt by posi performance and has "Street Port" which ports the inside of the supercharger and does not modify the bottom. Contact brian at posi for more info on his non-advertised street ports.

The lower intake has been drilled and tapped for a Lighting IAT sensor which is wired by splicing the IAT wiring for maf to the sensor. (so you computer can read the temps after the intercooler instead of before.) I can include the stock termy IAT sensor as a plug to fill the hole. The price also includes a new Lightning IAT sensor too.

Lower Heat Exchanger under intake and front mount intercooler has been professionally cleaned and leak checked

all soft and hard intercooler lines included, plus pump, and wiring.

Stock termy fuel intake rail, 39# injectors, 90mm Maf, Throttle body, throttle bracket, new throttle cable

JLT cobra cold air intake with new K&N filter

Tgoursh Eaton swap brackets, All correct fasteners, new additional pulleys to reroute accessory belt, Metco lower 7.5". (metco is smaller than a standared termy do to my build was trying to stay around 6-8 pounds. A stock termy lower diameter is about 10 plus pounds on a N/A mod motor, not counting the ported blower cooler intake charge would increase power even more.

Will also include a KenneBell 99-01 Cobra and 03/04 Mach 1 installation manual that I copied from a friend who has the kennebell unit. It is handy for wiring the knock sensors on a cobra and the intercooler pump to run via computer reading engine temps.

Also have complete terminator engine harness if needed for oem wiring or using a termy computer which is not needed. $100

Also have 99-04 steering column boost gauge with pod for additional $100

I will ship freight via Fedex, which will require you to go to your nearest fedex hub and pick up. There is one in most citys. Or if you know someone with a business and a dock door they can deliver. I have a plastic engine crate to pack it all securly.

Cost is $2900 plus shipping without the harness and Boost gauge

3200 plus shipping With all the extra parts

If there are some items you don't need we can always deduct from the final cost.

If your willing to meet near Indianapolis, IN within 60 miles I would even lower the price another $100 to save on time of packing and shipping.

If you need some feedback on who I am, my ebay call sign is carrew.


http://i1266.photobucket.com/albums/jj534/chris_carrew/cae1724a.jpg
http://i1266.photobucket.com/albums/jj534/chris_carrew/1f46bfd6.jpg
http://i1266.photobucket.com/albums/jj534/chris_carrew/ed342fa2.jpg
http://i1266.photobucket.com/albums/jj534/chris_carrew/f54d0407.jpg
http://i1266.photobucket.com/albums/jj534/chris_carrew/23f384a1.jpg
http://i1266.photobucket.com/albums/jj534/chris_carrew/afc6e1ff.jpg
http://i1266.photobucket.com/albums/jj534/chris_carrew/95989d5c.jpg
http://i1266.photobucket.com/albums/jj534/chris_carrew/8a37043f.jpg

[WhatsUpDOHC]

I posted it here.

It looked like a complete and clean setup.

I just wish that I had the $$ for it.

I hope that someone here can pick it up.

Mark

Sent from my DROID RAZR using Tapatalk 2

[myrodr]

this is great deal glws.

[SC Cheesehead]

this is great deal glws.


BIG +1, anybody considering an Eaton swap oughta jump on this with both feet; excellent value, and the closest thing you'll get to an S/C "kit" since the Trilogy.

[Spectragod]

I have the $$$, am close to you and just don't have a need. But man, that is a smoking deal for someone, half the money of a Trilogy kit (when they were available) with the same end result...... big power.

Someone NEEDS to buy this.

[WhatsUpDOHC]

I have the $$$, am close to you and just don't have a need. But man, that is a smoking deal for someone, half the money of a Trilogy kit (when they were available) with the same end result...... big power.

Someone NEEDS to buy this.

Can you buy it for me and pick it up?
:):beer:

Sent from my DROID RAZR using Tapatalk 2

[RacerX]

How much for the big toe and what's your blood type?

[Baconbit]

How much for the big toe and what's your blood type?



Haha! One of the best posts I seen in a while.

[tbone]

Last thing I need to complete my car, but my pockets are full of lint.:alone:

[slickster]

Ahhh let me go find someone to kill again

[Spectragod]

Can you buy it for me and pick it up?
:):beer:

Sent from my DROID RAZR using Tapatalk 2

Sure, but I'll need to make $500 for my efforts. :D

[jwibbity]

i could use my credit card for this but i just have a bad feelin about it, lol............my wife might not be too happy either, lol

[WhatsUpDOHC]

I'm thinking of tapping the Home Equity Loan and not telling the boss.....


Sent from my DROID RAZR using Tapatalk 2

[justbob]

i could use my credit card for this but i just have a bad feelin about it, lol............my wife might not be too happy either, lol

Do what I do and call your credit card company and barter a super low or even 0% fixed interest rate for the amount needed on a one or two year cash advance. Also insist that they stick to there normal fee for the cash advance. (typically 2% or $100 whichever highest) I have done that many times and was never once an issue! They know damn well that their competitors will..

Just don't forget to settle up in time!


Sent from my iPhone using Tapatalk

[Blackened300a]

:hmmm: ......

[bugsyc]

Great price.If anyone is in the market,you couldn't buy all those parts for the price.I must have 4G's invested in parts..I'm hoping to get them installed in the next few months...My stepdaughter went off to college and took my daily driver with her...So until I can get another vehicle,I can't take my MM off the road...Maybe she'll be a doctor and buy me one...;)

[Krytin]

:hmmm: ......


Say it ain't so............:confused:

[WhatsUpDOHC]

:hmmm: ......

No!!

Isn't it in the Marauder rulebook that you must remain N/A?



Sent from my DROID RAZR using Tapatalk 2

[DOOM]

Smokin deal!

[NATEHAWK]

Good deal right here fellas.....

[blkZooM]

Most likely the best deal I've seen on this site since I've joined here basically a supercharger kit for under 3gs

[Chris C.]

Well I priced it at 3g's cause its half the cost of a new Kennebell kit. Am I taking a little loss yes, but I would rather sell as a complete kit then part it out. I could make some money parting it out, but it takes a lot longer. Not that I need the cash and desperate, most likely I would sell a few parts get bored and lazy then 2 years goes by and I still have a bunch of stuff. I figured if somebody wanted a blown dohc many would go centrifical before a kennebell or a whipple do to lower cost. So I am just trying to give a slightly less option of a centrifical which I think makes the deal competitive with people ready to spend some money.

The kit is so complete the lower ballers are stupid, they say they could get the same parts. Yes you could but it will take awhile and you won't getting it any where near my offer. Plus I already did a couple of the hard parts like drilling the lower intake with the big tap thread, that most people would whine about paying just for the tap. I have access to a machine shop so no cost. Plus you get a new ported blower that you can't even get a posi port anymore since brian closed shop to spend time with his family. The heat exchangers are flushed and all the fins fixed. Also no broken or stripped bolts to mount the intercooler to the eaton. How many people I know who have broken or sheared bolts is quite high. The intercooler pump wire is a part from a whipple kit brand new. Heck even the fastenal fasteners which most people can't even buy or locate or do crazy all threads just to make stuff work. Don't forget the five emails from a ford dealer wondering why the heck I bought pulleys from 3 different vehicles, lightning IAC, and few other items. They didn't ship my order because they thought I was efffing idiot who didn't know what he was ordering. Even after I explained it, they kept trying to sell me new terminator parts that I didn't need. They kept saying I don't know what I am doing and they will charge me a restocking fee.

I gotta to sell it, I keep thinking I might be able to design and adapter to make the stock intake work on big block ford. So buy this NOW, before I decide to do somthing really stupid. oooohhhh Eaton on a subaru boxer motor stuck in a porsche 914, see it is a sickness. Buy it now!

[03sport007]

:hmmm: ......

Do it!!!!!! You won't regret it!!!!!

[jwibbity]

PM Sent!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!

[tbone]

Would someone please tell my wife to return her new piano and give me the money for something that really matters! @&*%^$

[SC Cheesehead]

:hmmm: ......



Do it!!!!!! You won't regret it!!!!!

^^^^^^ What he said, DO IT, Paul! :up:

[Seneca]

go for it Paul!!!!! Just give in to the Boost! ;) you'll never turn back. :lol:

[1stMerc]

Doesn't get much better than this. Go for it.

[Chris C.]

I forgot I also have a new FORD GT pump that I can add to the kit too. I went dual termy style and it is in my tank. The never used FORD GT pump is sitting on the workbench. I will throw in the gates submersible line and fuel line clamps too

JW wants to know what else is needed for a merc and what is not. I believe the early merc eaton swaps used the Lightning lower aftermarket pulleys, before metco made a special unit, Correct?

The CAI is maybe or a maybe not. The 90 mm maf, metco maf adapter, and K&N by itself would work

The intercooler lines would probably need modded

[WhatsUpDOHC]

You're killing me.


Sent from my DROID RAZR using Tapatalk 2

[guspech750]

Somebody for gods sake get this!!

You won't regret it:burnout:


Sent from my iPhone

4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

[HiHoSilver]

Ill trade you my two kids, boy is 3 girl is 1. And Ill throw in the wife too if you install. She is 26 and only nags 50% of the time she is awake.

[MMBLUE]

Somebody for gods sake get this!!

You won't regret it:burnout:


Sent from my iPhone

4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

No kidding..... I'm sick of reading about it. Gee whiz, THIS IS A STEAL :beer:

[WhatsUpDOHC]

$3000 Eaton swap
$1000 Eaton swap install
$500 Tune
$500 4.10 install
$1500 Stainless headers & exhaust
$5000 Marriage counseling

450 RWHP.....................

PRICELESS!!!!!

Sent from my DROID RAZR using Tapatalk 2

[RocsMerc]

:hmmm: ......
Lol, if your on the fence about this, I could give you a ride in my car. :burnout:

Don't forget, you could probably get enough money from selling your ported lower and polished upper N/A intake manifold to cover the cost of polishing the supercharger, lol. And that's not even counting the carbon fiber intake tube you have. You can give Doom a run for his money.

[Blackened300a]

Lol, if your on the fence about this, I could give you a ride in my car. :burnout:

Don't forget, you could probably get enough money from selling your polished N/A intake manifold to take a good dent out of the cost of polishing the supercharger, lol.

Yeah but then my carbon fiber intake tube and airbox are also out the window along with some of my other polished bits. Then I'll be stuck waiting til December for a tune since JDM is so backed up.

[WhatsUpDOHC]

Yeah but then my carbon fiber intake tube and airbox are also out the window along with some of my other polished bits. Then I'll be stuck waiting til December for a tune since JDM is so backed up.

Dibs on the above!!!

Sent from my DROID RAZR using Tapatalk 2

[jwibbity]

from the list the OP showed, what else is needed for this kit to be complete???? and what from the list is not needed, THANKS!!!!!!

[WhatsUpDOHC]

The only thing missing is my wife not talking to me for a year.


Sent from my DROID RAZR using Tapatalk 2

[Blackened300a]

Dibs on the above!!!

These parts are some of the rarest parts to be made for a Marauder. Not sure they will come so cheap. ;)

[justbob]

At this price I can't believe there is questions and not buyers. Ya snooze, ya loose. I don't sleep. 👀


Sent from my iPhone using Tapatalk

[SC Cheesehead]

from the list the OP showed, what else is needed for this kit to be complete???? and what from the list is not needed, THANKS!!!!!!

Mimimal, maybe a heat exchanger, fuel pump, and BAP. The hard to locate stuff is included, if interested, GO FOR IT!

[1stMerc]

Yeah but then my carbon fiber intake tube and airbox are also out the window along with some of my other polished bits. Then I'll be stuck waiting til December for a tune since JDM is so backed up.

Schucks man you don't have to slap it on right away. Just get it and worry about the other stuff later.

Do it Paul, you know you want to. Never know when another deal like this will come along.

[tbone]

Can someone loan me $3000?

[tbone]

Ya know, maybe I should get a loan on the car since it's paid off. Hmmmmm........

[MOTOWN]

Can someone loan me $3000?

Sure bud! @50% interest rate:coolman:

[jwibbity]

waiting on word and it might be mine!!!!!!!!!!!!!!

[SC Cheesehead]

waiting on word and it might be mine!!!!!!!!!!!!!!

Congrats!

PM replied to.

[1stMerc]

waiting on word and it might be mine!!!!!!!!!!!!!!

Good luck...

[guspech750]

waiting on word and it might be mine!!!!!!!!!!!!!!

:burnout: About time someone pick this up :burnout:


Sent from my iPhone

4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

[Chris C.]

JW lets finish the deal I sent you a pm

[Chris C.]

Mimimal, maybe a heat exchanger, fuel pump, and BAP. The hard to locate stuff is included, if interested, GO FOR IT!

the heat exchanger and fuel pump is included

[DOOM]

waiting on word and it might be mine!!!!!!!!!!!!!!

Good luck!

[WhatsUpDOHC]

I want to see one of us get this.

Mark


Sent from my DROID RAZR using Tapatalk 2

[justbob]

If one of you don't buy this then I might just have to clean off yet another shelf for future builds..

Hmm maybe eatonized Aviator sleeper?

Better hurry gentlemen. 😜


Sent from my iPhone using Tapatalk

[marauder21]

its still for sale!!??? What!? I thought it somebody already bought it...hhmm:rolleyes:

Sent from my SGH-T959 using Tapatalk

[jwibbity]

its still for sale!!??? What!? I thought it somebody already bought it...hhmm:rolleyes:

Sent from my SGH-T959 using Tapatalk

its not for sale anymore, its pretty much mine, arranging shipping and payment option!!!! Now comes the time to hide it from my wife, lol it probably gonna be alot of this:argue:

[marauder21]

its not for sale anymore, its pretty much mine, arranging shipping and payment option!!!! Now comes the time to hide it from my wife, lol it probably gonna be alot of this:argue:

aaww:(....I thought it was sold long time ago until I checked the threads n noticed it still wasn't. Lol well good buy that's for sure!
As hiding it from the wife, just say its your own early birthday gift :beer:

Sent from my SGH-T959 using Tapatalk

[Chris C.]

I think JW wife dug a 6 foot hole in the backyard, I was hoping to hear from him tonight. But I will check in tomorrow evening.

[jwibbity]

sorry im workin night crew, so im at work right now. PM replied to

[jwibbity]

ITS MINE!!!!!!!! MUAHAHAHAHAHAHA!!!!!!!!! :banana2::banana2::banana2:

[myrodr]

good for you!!! you will love the power. get it on and have fun

[WhatsUpDOHC]

ITS MINE!!!!!!!! MUAHAHAHAHAHAHA!!!!!!!!! :banana2::banana2::banana2:


Congrats!!!

Keep your head down around the house.........

Sent from my DROID RAZR using Tapatalk 2

[guspech750]

Yeaaaaaaa Beotches!!

Wooooooo Hoooooooo!!

:burnout:


Sent from my iPhone

4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

[Curless]

Congrats! I have a feeling after this weekend I am going to begin putting a kit together...

[Chris C.]

I got to speak to JW and man this guy is lightning fast already. I brought home plenty of boxes and packing material, I got start packing it up. Don't mine the dry tears on the boxes while unwrapping it when you get it. I will start placing everything in the crate tomorrow night and I will take it to work and metal band it. I will give you a call when it is ready

Just don't tell me the power numbers or how low the IAT's are, because I don't want to kick myself too hard.

[martyo]

I got to speak to JW and man this guy is lightning fast already. I brought home plenty of boxes and packing material, I got start packing it up. Don't mine the dry tears on the boxes while unwrapping it when you get it. I will start placing everything in the crate tomorrow night and I will take it to work and metal band it. I will give you a call when it is ready

Just don't tell me the power numbers or how low the IAT's are, because I don't want to kick myself too hard.

Save on shipping charges and send it straight to my shop. LOL!

[jwibbity]

thats actually not a bad idea

[MOTOWN]

Congrats bud! let the Wreeeeedoooomm begin!!!!!!!!

[martyo]

thats actually not a bad idea

I'm ful of 'em. Or full of something! :rolleyes::P

[PonyUP]

I'm ful of 'em. Or full of something! :rolleyes::P

Full of speed Marty, ask me how I know.

I agree, ship it straight there, get the install done and then prepare to gain about 50lbs........... In your right foot


The Ice Bucket Approves of this message

[CWright]

Full of speed Marty, ask me how I know.

I agree, ship it straight there, get the install done and then prepare to gain about 50lbs........... In your right foot


The Ice Bucket Approves of this message


^^^^ 100% Totally Agree! ^^^^^ :burnout::burnout:

[jwibbity]

well the wife found out today and she is not happy, :mad::mad::mad::mad:, she locked the door to the bedroom and left me a pillow and a sheet on the couch, I HATE THE F****** COUCH!!!!!!!

[WhatsUpDOHC]

$3000 Eaton swap
$1000 Eaton swap install
$500 Tune
$500 4.10 install
$1500 Stainless headers & exhaust
$5000 Marriage counseling
$0 Sleeping on the couch.

450 RWHP.....................

PRICELESS

Sent from my DROID RAZR using Tapatalk 2

[justbob]

well the wife found out today and she is not happy, :mad::mad::mad::mad:, she locked the door to the bedroom and left me a pillow and a sheet on the couch, I HATE THE F****** COUCH!!!!!!!

I would have thanked her and then ordered a complete exhaust system and gears. Did I mention I love the couch? I love the couch. 😜


Sent from my iPhone using Tapatalk

[tbone]

I'll buy it from you for $2000 in order to save your marriage.....

[imorb1994]

I'll buy it for $2500

[imorb1994]

To help you out

[jwibbity]

nope im keepin it, ill just take the couch for now

[JoeBoomz]

Tell her the rest of us have supporting wives.

And that she can have the damn couch.

:p

[Chris C.]

I like the comment if she is mad, mise well buy some more like headers etc. You really don't realize how much there is till you put all your treasuring hunting in a crate. I swear it feels as heavy as cast iron short block which I normally ship in it.

Look at the brightside the couch probably has a bigger TV nearby

[jwibbity]

well since im on couch duty, i went ahead and ordered some 4.10's along with it, she is gonna kill me, thanks sparta!!!

[WhatsUpDOHC]

well since im on couch duty, i went ahead and ordered some 4.10's along with it, she is gonna kill me, thanks sparta!!!

:beer::beer::beer::beer::beer: :beer::beer:

Sent from my DROID RAZR using Tapatalk 2

[jwibbity]

well supercharger will be here on thursday and gears on friday, I CANT WAIT!!!!!

looks like martyo is gone have some work to do on my ride!!!

[guspech750]

:beer::beer::beer::beer::beer: :beer::beer:

Sent from my DROID RAZR using Tapatalk 2

:banana2:boost and gears:banana2:

[Chris C.]

Yep the big box left today heading south

Off to sell more stuff

Thanks JW

and

Thanks everybody for any assistance in helping jw decide what is best

[1stMerc]

He just had to subcumb to the collective. Resistance was futile.

He will become one with the Borg...

[jwibbity]

He just had to subcumb to the collective. Resistance was futile.

He will become one with the BOOST...

corrected it for you, lol

[WhatsUpDOHC]

Good luck with the build!!

Keep us updated-And post up some pics!

Mark

Sent from my DROID RAZR using Tapatalk 2

[myrodr]

i was told forgiveness is easier to get than permission.

[jwibbity]

i was told forgiveness is easier to get than permission.

yea ill have to deal with the "mr. 3000" jokes, until i take her for a ride in it once its done

[WhatsUpDOHC]

yea ill have to deal with the "mr. 3000" jokes, until i take her for a ride in it once its done

Yeah.

Keep her at Mr. 3000......


Sent from my DROID RAZR using Tapatalk 2

[jwibbity]

im trying but i just want to keep buying more and more stuff!!!!!!!

[1stMerc]

One BIG mad rather than a bunch of little mads, eh eh eh..

[jwibbity]

well i got the eaton on friday, had to fly from work(70-80) on a 55mph road but i got it delivered and it look pretty amazing, port is nice and cleand and the rest of the parts are in top notch condition, THANKS CHRIS!!!!!!!!

[Chris C.]

No Thank you for making a big item sale so easy by taking care of setting up the shipping. You got a way better deal thru the shipper than I could. I only assume you got a military discount. Enjoy the storage box, I just hope your wife doesn't bury you in it.

[MarauderZX14]

:lol::lol:
How much for the big toe and what's your blood type?

[guspech750]

Enjoy the storage box, I just hope your wife doesn't bury you in it.

:lol: :lol:


Sent from my iPhone

4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

[jwibbity]

Enjoy the storage box, I just hope your wife doesn't bury you in it.

yea i think ima have to hide that thing from her too, but but if i have the same luck as when i tryed to hide me buying this, i might be S.O.L.

[justbob]

yea i think ima have to hide that thing from her too, BUT BUT if i have the same luck as when i tryed to hide me buying this, i might be S.O.L.


He's a stutter'er! There is NO WAY he could hide stuff from the wife! Just imagine when he gets nervous...

"i diddiddint orderrer notnotnothing babbabbby! Take these cuffs off PLEASE!!! And give me my clothes back! Oh dear put that back with the others!!! NO NO NO SORRY!!!!!!!!"😲

*passes out from being owned*😰

Will never be quite right. Ever.

Was it worth it? You bet! (I'm still doing fine, thank you)😜

You have been warned, but you won't listen... Two words, baby wipes.😳



Sent from my iPhone using Tapatalk

[jwibbity]

and i just sent an email for the tips, 4.10's on the way, and a 40a BAP, guess the whole till death do us part is coming up rather quickly!!!!!

[WhatsUpDOHC]

yea i think ima have to hide that thing from her too, but but if i have the same luck as when i tryed to hide me buying this, i might be S.O.L.

I guess the couch is looking pretty good now.


Sent from my DROID RAZR using Tapatalk 2

[martyo]

well supercharger will be here on thursday and gears on friday, I CANT WAIT!!!!!

looks like martyo is gone have some work to do on my ride!!!

Cool beans!!!!

[SC Cheesehead]

Cool beans!!!!

I gotta stay on top of this, Marty; interested in seeing what numbers he gets out of his swap (another trip to your shop may be in the Bluesmobile's future... ;)).

[Mw 2309]

Would u ship to Canada please!!!!

[jwibbity]

Would u ship to Canada please!!!!

sorry already got it

[les h]

Anyone have a complete eaton supercharger kit forsale?

[martyo]

Anyone have a complete eaton supercharger kit forsale?

We have one but shipping to Canada is downright painful.

[SC Cheesehead]

Anyone have a complete eaton supercharger kit forsale?

There's not an Eaton "kit" available, per sey. There's a list of parts required to do a swap, but the parts are typically used and are are gathered up from a variety of sources (i.e. e-bay, svtperformance, sellers on other mustang forums)