stall convertor

[bocat187]

what the best stall covertor for these cars i was thinking bout getting a 3200

[ctrlraven]

Circle D and PI.

You may need a re-tune to adjust for the converter. I needed one when I got a 3500.

[bocat187]

Circle D and PI.

You may need a re-tune to adjust for the converter. I needed one when I got a 3500.

are those triple or single disc.

[LANDY]

Get a single disc with your mods.bit should be fine. 3500 stall is the ideal.

[Blown3.8]

Get a single disc with your mods.bit should be fine. 3500 stall is the ideal.

+1 and may need tune adjusted like Raven said.

[bocat187]

Im also adding comp cams and a 100 shot of nitrous so what would be the best size stall to get for those mods added

[sailsmen]

PI usually recs a Tripple with Nitrous.

[Bradley G]

I went 36-3800 triple despite advice to keep the stall lower.
My tuner Lonnie Dolls' advice was to stall at the meat of the powercurve, since he has reworked my car to 15#'s of boost and has kept it near stock feel *Provided casual operation occurs.

[LANDY]

My experience with a single disc has been great. I made many passes locking one at 650rwhp on the gun. Never a hiccup but play at your own risk.

[fastblackmerc]

I've had a 3500 from PI for a number of years. Very happy with it.

[Blown3.8]

If you are hitting nitrous off the line you would technically want a lower stall. Nitrous makes loads of torque. If you don't plan to use nitrous much stall it for the motor power. You would prolly be safe with a 3-3200 stall. You shouldn't shoot the n2o below 3k or you may backfire it. You would be fine with a single plate.

[sailsmen]

I went 36-3800 triple despite advice to keep the stall lower.
My tuner Lonnie Dolls' advice was to stall at the meat of the powercurve, since he has reworked my car to 15#'s of boost and has kept it near stock feel *Provided casual operation occurs.

Heretic!;) Myth Buster!:)

[Bradley G]

don't get me started!!!,,, on Mileage Too, Last tank was when I left South Haven MI. despite two hours of stop and go traffic that tank yeilded 310 miles before the low suds lamp came on.:beer:
Heretic!;) Myth Buster!:)

[bocat187]

Is ptc and tci are good converters

[Pat]

My tuner, DR, recommeded a PI 3500 and I've had trouble free operation for many years. I also used a 100 shot ZEX wet system and set it to fire at 3000 RPM using the ZEX traction window box. That way I don't smoke the tires at launch and when the nitrous fires the engine is ready for it.