rear end clutches

[maineiac]

Gettin ready for the 410 gearset,what suggestions for the clutches,there is nothin like a GOOD BURNOUT ,BUT ONE STRIPE DOENT CUT IT!:burn:

[DOOM]

Cobra carbon fiber clutches!

They hold up great in my car!


http://i920.photobucket.com/albums/ad47/DOOMIE/e7664e31.jpg

http://i920.photobucket.com/albums/ad47/DOOMIE/3672df6e.jpg

http://i920.photobucket.com/albums/ad47/DOOMIE/DSC00312.jpg

http://i920.photobucket.com/albums/ad47/DOOMIE/DSC00311.jpg

http://i920.photobucket.com/albums/ad47/DOOMIE/DSC00313.jpg

http://i920.photobucket.com/albums/ad47/DOOMIE/2101740f.jpg

[maineiac]

If they held up in your car,they are Doom tested tough , good enough for me ,thanks.

[DOOM]

Here is what I'm using. Hope this helps.

http://www.summitracing.com/parts/FMS-M-4204-F318C/

http://m.summitracing.com/parts/FMS-M-4210-C

[maineiac]

Cant you buy just the clutch plates for a rebuild ?

[DOOM]

Cant you buy just the clutch plates for a rebuild ?

Yes you can buy the clutches separately.

Just showing you what I used. :beer:

[maineiac]

cool thanks, nice pics too.

[DOOM]

You should be able to buy just the clutches from summit.

[screamn]

Doom:

Whatever happened to the video of the burnout in the last pic. I know it was posted but somehow I cannot find it.

Would be great if you've got it to post it back up again as it makes my day watching it over and over.

I think that is the one where a lot of peeps were upset since it was done at an event, not sure which one, with people standing nearby and their vehicles also parked close to where all the action was. Security was also hunting.....

Sorry that this post is off the topic but had to use the above pic to get what I was looking for.

[screamn]

Found it...

http://www.mercurymarauder.net/forums/showthread.php?t=71560&highlight=carlisle

Thanks Jake for responding to my PM. :burnout:

[Curless]

I don't see the video???:shake:

[screamn]

I don't see the video???:shake:

No video only pics.

I checked with Jake.

I wish there was video for that burnout.....

[DOOM]

I don't see the video???:shake:

You would of loved that one! :burnout: :burnout: :burnout:

:beer:

[dmjarosz]

I think this is what you're looking for. Its gotta be one of these...

http://www.summitracing.com/search/Department/Drivetrain/Section/Differential-Rear-End-Components/Brand/Ford-Racing/Part-Type/Differential-Carrier-Rebuild-Kits/?Ns=Rank%7cAsc

Also, some here have mentioned using the diff spring from the F150 or F250. Anyone got part numbers?

[DOOM]

I think this is what you're looking for. Its gotta be one of these...

http://www.summitracing.com/search/Department/Drivetrain/Section/Differential-Rear-End-Components/Brand/Ford-Racing/Part-Type/Differential-Carrier-Rebuild-Kits/?Ns=Rank%7cAsc

I don't think those are the Carbon Fiber Clutches.

[JBFTech]

http://www.summitracing.com/parts/FMS-M-4700-C/

M-4700-C is the carbon fiber clutch kit

http://www.summitracing.com/parts/FMS-M-4700-B/

M-4700-B is the standard clutch kit

http://www.summitracing.com/parts/FMS-M-4204-F318C/

M-4204-F318C is the complete diff assy with carbon fiber clutches, for 31 spline axles.

Prices are comparable to what I paid when I bought the stuff for my F-150 last winter, through our parts dept. Thinking I'll go the same route on the MM plus upgrade the axles!

[maineiac]

Thank ordered them today

[bugsyc]

http://http://www.americanmuscle.com/ford-88-traclok-kit.htmlOn sale at American Muscle..$99.99

[Roadwarrior]

http://http://www.americanmuscle.com/ford-88-traclok-kit.htmlOn sale at American Muscle..$99.99

linky no worky. :confused:

[bugsyc]

it's (http://it's) not correct,it will redirect you.

[CWright]

Here is what I'm using. Hope this helps.

http://www.summitracing.com/parts/FMS-M-4204-F318C/

http://m.summitracing.com/parts/FMS-M-4210-C


Marty (Mo's Speed Shop)

Installing my 31's along with above parts next Tuesday! Plus a dialing her on in. :burnout::burnout: :D


Thanks for the info Jake! :beer:

[MOTOWN]

Marty (Mo's Speed Shop)

Installing my 31's along with above parts next Tuesday! Plus a dialing her on in. :burnout::burnout: :D


Thanks for the info Jake! :beer:

Hey Chris let me know when its going to happen, i would love spectate and meet the crew!

I have a little 4 banger i want them to dail in for me!:P

[CWright]

Hey Chris let me know when its going to happen, i would love spectate and meet the crew!

I have a little 4 banger i want them to dail in for me!:P


I'll be heading over and next Tuesday morning. I'll get there about 10:30-11.

[MOTOWN]

I'll be heading over and next Tuesday morning. I'll get there about 10:30-11.

Ok cool ill meet you there!:banana:

[CWright]

Ok cool ill meet you there!:banana:


Sounds good bubba! :D