Does this belong to anyone here or do you know it?

[MikeC]

Saw this on autotrader.
http://www.autotrader.com/cars-for-sale/vehicledetails.xhtml?zip=52601&endYear=2013&modelCode1=MARAUDER&startYear=1981&makeCode1=MERC&listingType=used&searchRadius=0&listingId=308970120&Log=0

[SC Cheesehead]

Twinscrew DTR, SpectraGod, maybe? :dunno:

[myrodr]

Dont knowwho but lidio did the work on it

[MOTOWN]

Maybe a Motorcity Marauder member since the car is in Michigan

[Blackmobile]

It's not Fruitpunch, I'd ask for more!

[DOOM]

5.3 stroker. 580RWHP!!!

[ImpalaSlayer]

i do believe that is spectra's car

[MM2004]

That's not Spectragod's.

Helluva setup nonetheless.

Mike.

[ImpalaSlayer]

That's not Spectragod's.

Helluva setup nonetheless.

Mike.

i think you're right actually, it has what i think is a Michigan tag.

i know ive seen that pic of the left front before though

[RubberCtyRauder]

It's been on Autotrader for some time now...That listing has over 4600 views.

[WhatsUpDOHC]

How can someone with a setup like that not be a member?????:confused::confused ::confused:

Sent from my DROID RAZR using Tapatalk 2

[Spectragod]

It is a Michigan car, Lidio built the motor for it. From what I understand, it needs some TLC, PDR & buffing, plus the interior has had some work done to it. It is not mine, I wouldn't take twice that price.

[Blackmobile]

So this begs the question: Is the majority of TwinScrews put into DTRs.

[Spectragod]

So this begs the question: Is the majority of TwinScrews put into DTRs.

Apparently DTR owners are the only ones with the coin for the twin screw...... :confused:

[DOOM]

Apparently DTR owners are the only ones with the coin for the twin screw...... :confused:

Not!!!!!!!

To be continued. ;)

[CWright]

Not!!!!!!!

To be continued. ;)

:popcorn:........

[hotford]

For that cash ...it should be gone......the long block and T/S would cost ya around 12-14 k alone maybe more....its a steel............

[J-MAN]

I've seen the car in person. At 20.5k it's vastly overpriced. If the motor was maintained as well as the rest of the vehicle it will need a tear down with rings and bearings replaced. Absent the motor a 9-10k vehicle at best. Typical Michigan driver that was used year round and never garaged. Lots of work if you want a project. No doubt a ton of $ was spent on this one, too bad the owner didn't maintain it.

[J-MAN]

I was told today that the car sold for 20.5k.

[Blackmobile]

I bet Doom picked it up to increase his Bling-ability.

[MikeC]

Thanks for all the info.

[MOTOWN]

Not!!!!!!!

To be continued. ;)

OOOOHHHHH boy! get ya popcorn ready!:popcorn::popcorn:

[71cyclone]

He is trying to Recoup the engine investment [Dont blame him]

[hotford]

Apparently DTR owners are the only ones with the coin for the twin screw...... :confused:
I have one and its not a DTR either..........lol

[sailsmen]

Must have been detuned. For all that it should have a lot more power.

[J-MAN]

Must have been detuned. For all that it should have a lot more power.

Lidio tunes for safe horsepower. I'd rather leave something on the table than have a 20k build go boom.

[J-MAN]

Car is not sold. I was told it was soon after I asked to see the underside on a rack.

[sailsmen]

Lidio tunes for safe horsepower. I'd rather leave something on the table than have a 20k build go boom.

For a lot less you can get the same power reliably. Cobra Long Blocks reliably produce 600+RWHP.

Makes no sense to spend all that money for extra power and then not have any extra power.

[J-MAN]

For a lot less you can get the same power reliably. Cobra Long Blocks reliably produce 600+RWHP.

Makes no sense to spend all that money for extra power and then not have any extra power.

Educate me. Who is running a 4.6 Cobra long block and Trilogy Twin Screw that gets over 600 RWHP. I may have to change my plans on my dream build.

[Jon01]

SVTP has dozens if not hundreds of Terminators with Whipples making 600+ at the tire.
I was |--| close to buying one with 120,000 miles that had been making 600 with a Whipple since I believe 80k without a whimper.

A Marauder will make slightly less power due to the auto and other minor reasons but there's no reason you can't get 600+ with a Terminator motor.
The stock trans and fuel system...well, that's another story and the main reason I've kept mine under 500.

[J-MAN]

SVTP has dozens if not hundreds of Terminators with Whipples making 600+ at the tire.
I was |--| close to buying one with 120,000 miles that had been making 600 with a Whipple since I believe 80k without a whimper.

A Marauder will make slightly less power due to the auto and other minor reasons but there's no reason you can't get 600+ with a Terminator motor.
The stock trans and fuel system...well, that's another story and the main reason I've kept mine under 500.

Thanks! I'll have to take a look over on SVTP. Can you recall just which one was running a Trilogy Twin screw at over 600RWHP?

[Jon01]

Any twin screw blower can make over 600 easily, no need to pay the premium for a Trilogy.
You can use the Gortch(sp?) brackets and do a drivers side inlet Whipple setup for well under the cost of a regular Trilogy blower let alone the TS cost.

[MOTOWN]

Any twin screw blower can make over 600 easily, no need to pay the premium for a Trilogy.
You can use the Gortch(sp?) brackets and do a drivers side inlet Whipple setup for well under the cost of a regular Trilogy blower let alone the TS cost.

Sounds like a sweet setup! great advice;)