PDA

View Full Version : J - Mod Sticky


DOOM
10-05-2012, 10:39 AM
Surprised we don't have a sticky for this.

Especially with all the threads that have been started lately.

Would be nice to have a thread with detailed instructions on how to do it and a good write up from someone that has done it.
marauder410
10-05-2012, 12:12 PM
agreed would love to see a sticky so i can get it done
fastblackmerc
10-05-2012, 01:05 PM
I'll be performing it to my MM next week.
DOOM
10-05-2012, 03:29 PM
I thought there was detailed instructions on how to do it floating around here somewhere.
maineiac
10-05-2012, 06:43 PM
hate to say i got some great instructions of a cv site,ordered a thicker plate drilled the holes and having it done next week, will take pics,and post.having a tach issue now hopefully fix that too.
maineiac
10-05-2012, 06:45 PM
also forgot to mention ,they had a template on what and where to drill
MyBlackBeasts
10-05-2012, 07:08 PM
These instructions are spot on except for the location of the small plastic screen that falls out when valve body is removed. It goes in the RF corner, not RR as stated in instructions: http://www.crownvic.net/tech/4R70Wnotes.pdf

I drilled #7 to 1/8" also which was in the instructions for older transmissions.

I did the #10 for reverse as the gear delay with OEM drove me nuts.

Have fun, I enjoyed doing the procedure.

The results are great!