PDA

View Full Version : Pipe


Coupe
10-08-2012, 11:07 AM
Need a new H-Pipe (or X-Pipe) for my Marauder. I find out, that WALKER only offers pipes for Crown Victoria w/ three different numbers, but no of them should fit at the Marauder. Whats the different? Where can i get it for less money?
fastblackmerc
10-08-2012, 11:13 AM
Need a new H-Pipe (or X-Pipe) for my Marauder. I find out, that WALKER only offers pipes for Crown Victoria w/ three different numbers, but no of them should fit at the Marauder. Whats the different? Where can i get it for less money?

Your best bet is to try to get one made for you. Make sure they mandrel bend the pipes.

Other option is to get a Mustang "X" or "H" pipe but that will have to be modified to fit.
Coupe
10-08-2012, 11:20 AM
no chance to get aftermarket pipe?
fastblackmerc
10-08-2012, 11:44 AM
no chance to get aftermarket pipe?

Not a Marauder-specific one.

You might want to check with anyone that makes a full exhaust system for the Marauder.
wannaMM
10-08-2012, 11:48 AM
Check this out...Last post he still had pipe for sale...


http://www.mercurymarauder.net/forums/showthread.php?t=79775
wannaMM
10-08-2012, 12:17 PM
Sorry about that last post...didn't scroll down to the end....try this linc-one of these part #s is the H-pipe

http://www.kooksheaders.com/category.php?cname=Headers&cid=1&sname=Ford&sid=2&pname=Marauder/Crown Victoria (4.6 2V)&pnid=38
screamn
10-08-2012, 12:43 PM
I went with a Bassani X pipe.

Installed it when I put in the borla mufflers.

So had the exhaust shop do some modifications to the pipes.

Cost a little more than expected but music to my ears.
justbob
10-08-2012, 03:19 PM
On the cheap side, I guarantee you that a crown Vic one would fit perfectly fine. The gaskets are identical (that's what I always order) and the factory mufflers take a whopping 2 1/8" clamp.


Sent from my iPhone using Tapatalk
Coupe
10-17-2012, 12:04 PM
anyone knows the different between the three Crown Victoia H-Pipes?
Coupe
10-17-2012, 12:09 PM
On the cheap side, I guarantee you that a crown Vic one would fit perfectly fine. The gaskets are identical (that's what I always order) and the factory mufflers take a whopping 2 1/8" clamp.


Sent from my iPhone using Tapatalk

may i have too order one in the hope, that will fit
Krytin
10-17-2012, 01:17 PM
How about this from a vendor on this site?

http://www.stainlessworks.net/products/exhausts-catbacks/mercury-marauder-2003-2004-exhausts.html
Coupe
10-18-2012, 03:45 AM
very nice, but soo expensive
GreekGod
10-19-2012, 11:20 AM
On the cheap side, I guarantee you that a crown Vic one would fit perfectly fine. The gaskets are identical (that's what I always order) and the factory mufflers take a whopping 2 1/8" clamp.

The CV 2V pipes fit up to the MM 4V manifolds?

==================
Coupe
10-19-2012, 11:27 AM
this is the answer from WALKER:


Thank you for your inquiry for Walker Exhaust. We appreciate your interest in our products. As we do not list the part for the Marauder I can not guaranty that the parts for the Crown Vic will fit properly. The H pipe for the Crown Vic is part number 50326.
http://imageshack.us/a/img221/932/mailanhangi.gif (http://imageshack.us/photo/my-images/221/mailanhangi.gif/)

Uploaded with ImageShack.us (http://imageshack.us)
wannaMM
10-19-2012, 12:24 PM
Bought this EXACT "H" pipe for my son,and it fit his 1999 GM from the cats back...
also ordered 2 "louder than stock" freeflowing muffs & tails W/O resonators,all I had to install were the hangers on the drivers side,as we were converting to dual exaust.
Gained 1-2 mpg...(and he likes the sound)
justbob
10-19-2012, 01:16 PM
The CV 2V pipes fit up to the MM 4V manifolds?

==================

I am not certain the down pipes are the same. (probably so) I was referring to the H pipe in question. I would gamble that if I were looking for a cheap fix. I do know for a fact the H pipe gaskets are identical in every way.


Sent from my iPhone using Tapatalk