PDA

View Full Version : Wanted To Buy power steering cap


bugsyc
10-15-2012, 08:31 AM
Like it says I need the cap or cover for the power steering resevoir....Got one to sell??Let me know.Thanks....Also looking for a 90 degree bend PVC valve..Can't find one..
fastblackmerc
10-15-2012, 09:36 AM
Check here:

http://www.uprproducts.com/

Some of the 1999 - 2004 Mustang under the hood parts will fit our Marauders.

For the PCV valve elbow, visit a NAPA store. They should be able to find something that will fit. Or see if any FLAPS might have a PCV with the elbow. You might have to buy a different PCV to get the elbow.

Looking at what Dorman has to offer I found these part numbers that might work:

46022
47046
47047 - this looks like the best fit
bugsyc
10-15-2012, 10:25 AM
I ordered the dorman 47047 elbow from Autozone,and they said they'll have it tomorrow...The thing with the power steering cap is I bought the chrome cap that fits over the whole top of the resevoir.These usually go on top of the original cap,which I no longer have because I needed to grind down the original to get my present cap on..
bugsyc
10-15-2012, 10:32 AM
This is what I'm talking about..They have 1 OEM on ebay for like 20,didn't really want to pay that.Maybe a junk yard.I'll wait till it comes and see if what I have on it now will work or not
Krytin
10-15-2012, 01:40 PM
Regarding the PCV valve - if you heat the elbow up it comes off the old valve and can be reinstalled on the new valve. That's what I did. Of course if you don't have the old valve/elbow......
bugsyc
10-15-2012, 02:39 PM
Which elbow are you refering to? A rubber elbow?? Which new PVC valve did you put in??
fastblackmerc
10-15-2012, 02:47 PM
Which elbow are you refering to? A rubber elbow?? Which new PVC valve did you put in??

He's referring to the old PCV valve. You need to take the elbow off to put it on the new one. Running it under hot water will soften it up enough to take it off the old one and install it on the new one.
Krytin
10-15-2012, 02:50 PM
He's referring to the old PCV valve. You need to take the elbow off to put it on the new one. Running it under hot water will soften it up enough to take it off the old one and install it on the new one.

Yep - what he said.
bugsyc
10-16-2012, 05:19 AM
Power steering cap gotten (thanks Paul) PVC elbow bought Dorman part#47047 from auto zone..Thanks to those who helped...
bugsyc
10-19-2012, 06:34 AM
I got the Dorman part number 47047 and it's tiny.No amount of heating in the world would get it over my valve.Maybe my valve is different..The side that goes to the hose is way too small.I can't figure it out.Anyway I bought a new valve that comes with 90 degree elbow...17.83 + 8...$25.83