alternator

[bugsyc]

Does the pulley that is on the stock alt. need to be changed? Not talking about idler pulley that is reversed and mounted on custom brackets. I'm asking because I'm seeing a lot of alternators on ebay with what look like 6 rib pulleys on them that say are a must for swap..

[MOTOWN]

Changed for what?? an eaton swap??

[bugsyc]

Sorry,Yes for an Eaton swap

[MOTOWN]

I think the oem clutch pulley has to be removed for an Eaton swap, not 100% sure, im sure someone who has done the swap will confirm

[bugsyc]

http://www.ebay.com/itm/METCO-MOTORSPORTS-COBRA-3-20-ALTERNATOR-PULLEY-/150814074850?pt=Motors_Car_Tru ck_Parts_Accessories&vxp=mtr&hash=item231d3827e2 something like this??http://thumbs3.ebaystatic.com/m/m7sYmEoxcXFC3VQkuhgaeeQ/140.jpg

[fastblackmerc]

Isn't the clutch pulley only on '04 Marauders?

[bugsyc]

To answer my own question,the alternator pulley shown 2 posts up is only needed if your crank pulley is 6lb or more.Not needed on stock,2lb or 4lb lower crank pulleys...I still wonder if a different pulley from stock is needed on the alternator to accomodate the 6rib acc. belt... Rex,you out there???

[Blackmobile]

Isn't the clutch pulley only on '04 Marauders?

Clutch pulley is on 03's also

[SC Cheesehead]

To answer my own question,the alternator pulley shown 2 posts up is only needed if your crank pulley is 6lb or more.Not needed on stock,2lb or 4lb lower crank pulleys...I still wonder if a different pulley from stock is needed on the alternator to accomodate the 6rib acc. belt... Rex,you out there???

I don't recall Dave changing the alternator pulley, but I could be wrong.

[bugsyc]

http://www.ebay.com/itm/2003-2004-03-04-cobra-mustang-supercharger-bridge-tube-pulley-bracket-alternator-/180995871036?_trksid=p5197.m19 98&_trkparms=aid%3D222001%26algo% 3DSIC.CURRENT%26ao%3D1%26asc%3 D17%26meid%3D27905307920056818 45%26pid%3D100017%26prg%3D1006 %26rk%3D2%26sd%3D150814074850% 26 CHECK THIS ONE OUT TO SEE WHAT I'M TALKING ABOUT

[guspech750]

Yes. You need to remove the pulley on the alternator.


Replace it with Alternator pulley f5az-10344-a Motorcraft gp-712

Call some Ford dealers and see if they have it in stock. May have to order it.

Sent from my iPhone 4S

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

[SC Cheesehead]

Yes. You need to remove the pulley on the alternator.

Replace it with Alternator pulley f5az-10344-a Motorcraft gp-712


Sent from my iPhone 4S

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom



Oops! My bad! :o

Right after I posted my reply I checked and saw the same thing in my parts list...

[guspech750]

Oops! My bad! :o

Right after I posted my reply I checked and saw the same thing in my parts list...

Getting slow old man. Just like my DT......... um wait, just like ......................... yeah you know it. I'm outa here :burnout:

;)


Sent from my iPhone 4S

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

[SC Cheesehead]

Getting slow old man. Just like my DT......... um wait, just like ......................... yeah you know it. I'm outa here :burnout:

;)


Sent from my iPhone 4S

DTR + 4.10's + Eaton swap = Wreeeeeeeeeeeeeeedom

Never forget, Joey, "Old age and treachery will overcome youth and skill."

Every time... ;) -----> :D

[bugsyc]

Tasca has f5a1034-A what's the motorcraft gp712??? Are these two the same part??? Both are available...Which one should I get??? Never mind,they're the same.Done and done.Rock Auto