More power?

[kari40]

Hello.
How i can get more power to my MM Trilogy?
Now there is 359 hp from rear wheel.
Happy New Year from Finland.
Kari

[martyo]

What is done to your car now?

[SC Cheesehead]

More aggressive tune.

Smaller upper pulley, or larger lower pulley.

Long tube headers and low restriction exhaust.

Port job on the blower.

All of the above.

[RacerX]

Säveltä todennäköisesti erittäin turvallinen virittää ja muutettava, jotta enemmän hevosvoimia. Olen nähnyt varastossa trilogia sarjat on lähellä 400rwhp. Rex sanoi, voit asentaa pienempi ahdin pullery tai suurempi läpimitta pienempi, kampi, talja. Saat myös ahdin itse siirretty antaa lisää ilmanotto. :beer:

[SC Cheesehead]

Säveltä todennäköisesti erittäin turvallinen virittää ja muutettava, jotta enemmän hevosvoimia. Olen nähnyt varastossa trilogia sarjat on lähellä 400rwhp. Rex sanoi, voit asentaa pienempi ahdin pullery tai suurempi läpimitta pienempi, kampi, talja. Saat myös ahdin itse siirretty antaa lisää ilmanotto. :beer:

Like my old Uncle Heinrich used to say, "Wahr, das." :beer:

[kari40]

There is mounted Trilogy supercharger kit, nothing else.

[kari40]

Where i can get smaller and larger pulley to my Marauder and can i use that old belt for it?

[DOOM]

http://m.youtube.com/watch?v=PIuo4lrUSxE#
PIuo4lrUSxE#

[kari40]

Wow, how you get that much power?

[DOOM]

Wow, how you get that much power?

Cobra motor
Long tube headers and full custom exhaust
Ported super charger
60# fuel injectors
Twin ford GT supercar pumps
3.0 blower pulley
4# cobra crank pulley

[kari40]

Ok. Thanks.
Kari

[justbob]

Where i can get smaller and larger pulley to my Marauder and can i use that old belt for it?

Small upper - Billetflow, ask for a 2.8, 3.0, or 3.2 upper Trilogy pulley.

Lower - Metco, look up Marauder with Trilogy and get the hub with a +2 or +4 pulley.

You will need a different length belt.


Sent from my iPhone 4s using Tapatalk

[SC Cheesehead]

Small upper - Billetflow, ask for a 2.8, 3.0, or 3.2 upper Trilogy pulley.

Lower - Metco, look up Marauder with Trilogy and get the hub with a +2 or +4 pulley.

You will need a different length belt.


Sent from my iPhone 4s using Tapatalk

http://www.metcomotorsports.com/products.asp?cat=114

When you contact them, tell 'em the MM.net guys sent you, Rick and Kristi will take good care of you. :up:

[martyo]

Keep in mind that if you do a pulley swap, the car will need to be retuned.

Who will handle that in Finland?

[SC Cheesehead]

Keep in mind that if you do a pulley swap, the car will need to be retuned.

Who will handle that in Finland?

Yup, that could be an issue.

I hear that over that way, you can tuna fish, but you can't tune a MM... :cool4:

[71cyclone]

Like my old Uncle Heinrich used to say, "Wahr, das." :beer:

Box nix':beer: LOL

[kari40]

Yup, that could be an issue.

I hear that over that way, you can tuna fish, but you can't tune a MM... :cool4:

Finland is the best in the world tuning workshops!!!!! You know!

[kari40]

Keep in mind that if you do a pulley swap, the car will need to be retuned.

Who will handle that in Finland?

martyo.
We can make that retuned here in Finland.

Kari

[martyo]

martyo.
We can make that retuned here in Finland.

Kari

Very cool. Do they use SCT there?

[kari40]

Yes, i thing that tehy



Yes, they can do taht.
Kari

[cj7chris]

Cold air intake (CAI) will help you make a little more boost (~1 lb) as well, no matter which pulley you install. A CAI and a smaller upper pulley, followed by a re-tune should get you up into the lower 400 hp range (~420 hp to 440 hp) for peak, and your mid-range hp and torque curves should be higher as well.

For a 3.0 or a 3.2 pulley, here is the NAPA part number:
NAPA 25-080505

I realize that you won't have NAPA over there, but you might be able to cross reference via the napa website to a distributor in Finland.

If you want to go faster (vs make more power), think about control arms, too.

[kari40]

What is that NAPA website address?

[kari40]

I find it, that is belt number?

[kari40]

I come to USA in april and i can buy that pulley(s) and belt then, is there pulleys in NAPA or where i can buy the parts. I come to Oceanside, CA.

[cj7chris]

Pulley vendors for upper and lower pullies are listed post #12.

That is the part number I have in my notes for the proper belt for either the 3.0 or 3.2 upper pulley with the stock lower. You should be able to use the NAPA website to find a store near you in Oceanside and to see if they have the belt in stock.

--Good luck!