60ft times

[na svt]

What's a good 60ft time for an n/a Marauder? I'm not interested in FI times.

[Joe Walsh]

Click the Timeslips column above and sort by N/A cars.

I cut a 1.795 second 60 ft with 16" drag radials and OEM 3.55 gears (Effective ratio 3:89:1)
That was with the 305 cid engine.

Most low ET N/A cars seem to be in the 1.9 second range.

[na svt]

Click the Timeslips column above and sort by N/A cars.

I cut a 1.795 second 60 ft with 16" drag radials and OEM 3.55 gears (Effective ratio 3:89:1)
That was with the 305 cid engine.

Most low ET N/A cars seem to be in the 1.9 second range.

Thanks a bunch

[Bluerauder]

Click the Timeslips column above and sort by N/A cars. Most low ET N/A cars seem to be in the 1.9 second range.

And the dogs and trained monkeys are in the 2.4-2.5 range like me. :rofl:

[ctrlraven]

I did a 1.930 with Joe Walsh's 16" drag radials and I believe I had 4.10 gears then for effective ratio of 4.57 (I think). PI 3500 stall on stock 150k mile motor also.

[Joe Walsh]

I did a 1.930 with Joe Walsh's 16" drag radials and I believe I had 4.10 gears then for effective ratio of 4.57 (I think). PI 3500 stall on stock 150k mile motor also.

HEY!.....:eek:

How'd you get MY 16" drag radials......:P

Glad to hear that they are still hookin' up Chris!....:2thumbs:

[Blackened300a]

Low 1.9's is where I been.

[99SVT]

1.9 for me when I was N/A and 4.10's.

Sent from my LT15a using Tapatalk 2

[babbage]

I ran a 2.1 60ft and ET of 13.9 N/A

[na svt]

What gears and converters were ya'll running? I assume that most of you with stock engines still have the stock cams.

[na svt]

Click the Timeslips column above and sort by N/A cars.

I cut a 1.795 second 60 ft with 16" drag radials and OEM 3.55 gears (Effective ratio 3:89:1)
That was with the 305 cid engine.

Most low ET N/A cars seem to be in the 1.9 second range.

What Crower's do you have? Do you know the installed intake LC?

[Curless]

BONE STOCK, 2.3 was the best 60'... 15.17 was the best E.T. @ 93.25

[ctrlraven]

Frpp 4.10, pi 3500.

[Blackened300a]

4.10s/3K PI converter on street tires.

[breeze]

2.1 4.10s stock convertor

[Joe Walsh]

What Crower's do you have? Do you know the installed intake LC?

Crower 'Baja Beast' Cams.
Back when I had the engine built there were few 4V modular aftermarket cams available.
I wanted to keep as much midrange torque as possible with an auto trans/ heavy car.

They put down 340 FT/LBs RWTQ

I'll have to find the cam card that came with them.
Don't know the lobe center on the install.

I'm looking at replacing them with a newer/better set of cams to complement the engine's larger displacement.

[Blown3.8]

What did Barry run on his quick pass? Couldn't find it in the time slips.

[Bluerauder]

What did Barry run on his quick pass? Couldn't find it in the time slips.

• “Cruztaker” sets N/A Marauder 1/4 mile record at 13.270 @ 103.21 (October 2004, Mason-Dixon Dragway, MD) & gets Best Burnout trophy

Yes, it disappeared long ago. Don't have his 60 ft and other times.

[CameronVic]

I ran a 2.1 60ft and ET of 13.9 N/A
wow, that 13.9 was with a 2.1 60?!

[babbage]

wow, that 13.9 was with a 2.1 60?!

Yep got several slips that show this. Plus I weigh 280, car has A/C, power seats - Everything.

[cragantler]

And the dogs and trained monkeys are in the 2.4-2.5 range like me. :rofl:
Puts me with the dogs with 2.3 with peg-legging 2.73s :banana2: