Centri guys need help.

[camelgrundle]

The bypass valve. Does the plunger face the pipe to the bottom of the centri. Meaning the piece you can push in. And the side valve go to the pipe with air filter. And any tips for the vacuum line. Thanks for input!

[MOTOWN]

Depends on what bypass valve your using , a picture would help, as for the vacuum line your going to tee it in to one of the existing vacuum lines

[LANDY]

The valve opens in vaccum, closes in boost. If you are recirculating the air, the valve side goes after blower and outlet goes before blower.

[camelgrundle]

Thanks got it.

[camelgrundle]

Ok now I now the 2 outer most wires are for the Iat sensor. However I have not seen anything for the iat pig tails themselves. Does it matter which ones?

[camelgrundle]

I just read that and it sounds confusing. So the iat sensor is marked 1 and 2 does wire 1 go to wire 1 on maf and 2 go to 6. Or other way around ?