PDA

View Full Version : Trilogy Marauders and Rauders w/ blowers


metroplex
03-08-2004, 04:47 PM
What intake system are you using?
The stock airbox + stock MAF? or are you using something else w/ roots blowers?
Logan
03-08-2004, 05:07 PM
Stock airbox's mostly. DR's kit has a completely custom intake kit, won't retro to a N/A car though...
metroplex
03-08-2004, 05:22 PM
DR's kit has a completely custom intake kit, won't retro to a N/A car though...

Do you have any pics of this kit?
What type of MAF does it use?

On that note.. what MAFs do the supercharged Marauders generally use... their stock 80mm MAFs?
MI2QWK4U
03-08-2004, 06:06 PM
Lidio has gotten great results with the Pro-m 80mm MAF and Conical filter element. I know for a fact he tried several, at least 6 or 7 before he found the setup that worked the best with programming and the Trilogy Eaton Blower setup. He ordered the same one he has on his car today, and hopefully with my setup, will appreciate somewhere between 15-20 RWHP increase, but the big gain will be in Torque.
metroplex
03-09-2004, 02:28 PM
I'm not too fond of the conical cotton gauze filters. The material doesn't catch a lot of dirt - I drove through a dusty cornfield in NJ and there was hardly any dirt in the airbox... I was RIGHT behind a tractor that was pulling up all this dirt in the farm area. :(

Anyhow, if anyone else can provide some input - I'd appreciate it.

I just want to know the limitation of the stock 80mm Marauder MAF.