Accumulator Springs

[cougar9150]

Anyone here replace the accumulator springs in their MM. I have nasty clunk on the 2-3 shift only, and a mild one on 3-OD. 1-2 is fine with no noise at all but after doing some reading it seems it may be a broken spring on the 2-3 accumulator piston. I'm thinking about jumping in and replacing all 3 sets of springs and the pistons (since I'll be in there.

Just looking for any advice, tip/tricks otter have used and possibly a good source for the parts. I was really thinking about ordering it from Ford because I have all the stock P/Ns but don't want to be overcharged on the prices.

Sent from my SPH-D710 using Tapatalk 2

[MM2004]

Anyone here replace the accumulator springs in their MM. I have nasty clunk on the 2-3 shift only, and a mild one on 3-OD. 1-2 is fine with no noise at all but after doing some reading it seems it may be a broken spring on the 2-3 accumulator piston. I'm thinking about jumping in and replacing all 3 sets of springs and the pistons (since I'll be in there.

Just looking for any advice, tip/tricks otter have used and possibly a good source for the parts. I was really thinking about ordering it from Ford because I have all the stock P/Ns but don't want to be overcharged on the prices.

Sent from my SPH-D710 using Tapatalk 2

Anyone that has had, or is doing J-Mods, should have the springs laying around.

Might be a good start?

Or, take 'em out, then drill a few holes and you're J-Modded.

:D

Mike.

[cougar9150]

Already got the Art Carr stage 2 kit with modified valve body, see my signature below.

Sent from my SPH-D710 using Tapatalk 2

[ctrlraven]

I've gotten all my parts from here
http://www.makcotransmissionparts.com/AODE.html

[LANDY]

Phil give me a call

[cragantler]

Anyone that has had, or is doing J-Mods, should have the springs laying around.

Might be a good start?

Or, take 'em out, then drill a few holes and you're J-Modded.

:D

Mike.
I'd give you mine, but one is on my key ring :banana2::banana2::banana2:

[burt ragio]

I would change the pressure control solinoid & pump.