PDA

View Full Version : spider gears for the marauder


bigmerc281
03-09-2013, 09:04 AM
Does anyone know where i can find the spider gears for the marauder differential. I looked almost everywhere and i tried using. The gears from a mustang but there were to small. Any input would be apreciated
rocky
03-09-2013, 10:38 AM
2L1Z4215EA is your part number for the kit. Retail is about 180...shows to be for the MM with locking and 28 spline axles...hope that helps?


Sent from my iPhone 5
justbob
03-09-2013, 10:59 AM
Are you looking for 28 or 31 splined splined? I think model year 05 crown vic went to 31's, prior years being 28's and as always Vic's are much easier to find stuffs.


Sent from my iPhone 4s using Tapatalk
bigmerc281
03-09-2013, 12:31 PM
Are you looking for 28 or 31 splined splined? I think model year 05 crown vic went to 31's, prior years being 28's and as always Vic's are much easier to find stuffs.


Sent from my iPhone 4s using Tapatalk
28 spline i was hoping cv would have i might have to head to the junkyard
bigmerc281
03-09-2013, 12:35 PM
2L1Z4215EA is your part number for the kit. Retail is about 180...shows to be for the MM with locking and 28 spline axles...hope that helps?


Sent from my iPhone 5

Thanks bro :beer:
rocky
03-09-2013, 12:38 PM
Thanks bro :beer:

But remember, NOBODY pays retail 😎


Sent from my iPhone 5
RoyLPita
03-09-2013, 12:48 PM
2L1Z4215EA is your part number for the kit. Retail is about 180...shows to be for the MM with locking and 28 spline axles...hope that helps?


Sent from my iPhone 5

This is for the Limited Slip differential? I thought the spider gears were part of the whole case?
rocky
03-09-2013, 01:04 PM
This is for the Limited Slip differential? I thought the spider gears were part of the whole case?

Oh snap!

Big apology, yes the MM is it's own animal..never noticed this before
33231
Sorry, my bad


Sent from my iPhone 5
rocky
03-09-2013, 01:38 PM
High torque locker 3R3Z4026AA
Used on MM some CVPI and "V8 appearance group" mustangs Mach 1 and Cali special probably.
Discontinued...


Sent from my iPhone 5
bigmerc281
03-11-2013, 08:39 PM
dam im screwed can i find these gears on another car ?
cougar9150
03-12-2013, 06:48 AM
I have a carrier I just swapped out of my MM. It will need new clutches but the gears and all the hard parts are in good shape per the shop. Shoot me a PM if interested.

Sent from my SPH-D710 using Tapatalk 2
Vortech347
03-12-2013, 08:49 AM
I'm running a mustang carrier in mine?