Boost Line location

[lilmarauder]

Where exactly are you guys running your boost guage line from? Are you just using vacum hose to the gauge and teeing it into the vacum lines? I was gonna use the map/iat2 sensor port for my boost guage but Im planning on using the cobra sensor and not drilling my intake.

[justbob]

Use the lower port on the back of the blower. You will need to run 1/4" to the FRPS, and an 1/8" vinyl tubing to the gauge. If you didn't get any tubing with your gauge, you can buy a kit for like $6 at almost any auto parts store.


Self proclaimed Builder Of Badassery.

[lilmarauder]

Ok got it. Thanks