reset my door key pad code

[kgjr24]

Whats marauder ppl I just got my 2004 marauder I wanted to know if any ones knows how to reset the code on the door to my own code the person that I bought the car off didnt remember it so pleaseeeee hellllllllpppppppppppp meeeeeee thanks

[WhatsUpDOHC]

Welcome to MM.net!

Should be a decal on the inside of the passenger side trunk mount with the code.

If not, the manual tells how to customize the code.

[ctrlraven]

You can't reset the factory code but you can add up up to 4 or 5 personal codes on it on top of the factory code.

The manual will tell you how to add a personal code.

[Trevor M]

Not trying to steal the thread but if anyone can let me know how to add a personal code that would be greatly appreciated. I did not receive a manual with my car when i got it. Thanks

[beantown mm]

Whats marauder ppl I just got my 2004 marauder I wanted to know if any ones knows how to reset the code on the door to my own code the person that I bought the car off didnt remember it so pleaseeeee hellllllllpppppppppppp meeeeeee thanks


Congrats, you can make your code 1279 then IM me your address and I can send you a reminder memo so you don't forget it.

take care.

[Mebot]

"1-2-3-4-5? sounds like the combination an idiot would have on his luggage!"

sent from space

[kgjr24]

Thanks guys I will try that and if I get some trouble I will ask u guys for more help also I dont have the manual ....

[MMcactusflower]

As stated...if you take the driver's door panel off, the code number will be on a white sticker on part of the inner door frame...or at least mine was on my DTR.
I do understand that sometimes it can be found on the trunk lid supports or under the dash on the computer module...but mine was not in any of those locations.

[ctrlraven]

Not trying to steal the thread but if anyone can let me know how to add a personal code that would be greatly appreciated. I did not receive a manual with my car when i got it. Thanks
http://www.manualowl.com/am/Mercury/2004-Marauder/Manual/4169?page=68
Page 68 and 69


"1-2-3-4-5? sounds like the combination an idiot would have on his luggage!"

sent from space
http://www.trade-nations.com/sites/default/files/SpaceballsLuggage.jpeg

Makes me want to go watch it right now! :lol:

[kgjr24]

Hell ya guys thanks ...... also any good looking headlights i neee them .....again thanks

[kgjr24]

Ok so I did the steps to reset it the one where turn on key and hit the unlock 3 times one it did seem it work but how do I set own code after I follow these steps????

[WhatsUpDOHC]

I put a screenshot of the instructions in your other "thread":

http://www.mercurymarauder.net/forums/showthread.php?t=86242

Mark

[L.Mark]

"1-2-3-4-5? sounds like the combination an idiot would have on his luggage!"

sent from space

Hey that's the code I use...:P

[Shaijack]

Hay My code is 1-2-3-4-5. I thought I was the only one to use it.

[Shaijack]

I keep the extra keys under the drivers mat.

[Blk04MM]

Pull the driver door panel off the stock code is on the lock module ...thats all you need to set your own code(s)

[ROCOB]

IF you have a friend at a Ford dealership, have them pull the code with their computer. I am pretty sure they can erase all previous codes except the factory installed code associated with the PATS module. If your PATS module has been changed, there is a good chance that the stickers that came with the car, located in the manual, trunk, etc may not have been changed.

[pc642]

Step 1
The Factory Code is printed on a sticker on a module behind the drivers door panel, or affixed to the gas spring arm on the right side of the trunk's interior.

Step 2
Enter the five-digit factory-programmed code into the keypad on the outside of the driver's door.

Step 3
Press the "1-2" button immediately after the factory code has been entered. This must be pressed within five seconds. This will activate the code-setting mode for the personal code.

Step 4
Enter your preferred five-digit personal code. Make sure that you press the first button within five seconds of initiating the process and press each subsequent button within five seconds of the one before it, otherwise the code-setting mode will time out.

Step 5
Look and listen for the power door locks to cycle on and off. This is a signal from the vehicle confirming that the personal code has been changed.

:banana:

[Turbov6Bryan]

3 years later.....

[BLACKMARAUDER04]

Easy.
Enter original Code
Enter #1
Enter your new 5 digit code.
Hit 8+9 and Lock doors.
Try new code.

[03Merc]

My last digit isn't working great, anyone have a decent keypad for sale?


#1618 of 3214

[Shaijack]

I use a hammer to unlock my doors.

[Mebot]

I use a hammer to unlock my doors.
That's amazing. I thought I was the only one

Can't stop the signal...

[Toomanytoys]

I use a $40 laptop and auto enginuity software to change codes, burn ford code keys, even reprogram the security on the old Lincolns that my friends $6,000 snap on unit has trouble with. Very useful and has real time streaming of data from all inputs.

[03Merc]

I use a $40 laptop and auto enginuity software to change codes, burn ford code keys, even reprogram the security on the old Lincolns that my friends $6,000 snap on unit has trouble with. Very useful and has real time streaming of data from all inputs.



Your name says it all!


#1618 of 3214

[1Marauder]

I want one!

[BAD MERC]

What's a ppl?