Larger oil pan and windage tray

[ctrlraven]

Does anyone have a MMR 7qt oil and/or using the MMR (Canton) windage tray on their MM?

[J-MAN]

Motown Marauder used a larger capacity oil pan in his build. Check his thread out on his build. Lots of information.

[ctrlraven]

Thank you good sir.

[MOTOWN]

Motown Marauder used a larger capacity oil pan in his build. Check his thread out on his build. Lots of information.

Thanks J-MAN! i dont think the MMR oil pan will clear the Kmember on our cars , im not 100% sure but it looks like it wouldnt clear from just looking at their oil pan.

[J-MAN]

Roger, what pan was it that you used that cleared? What's the status on you build? Great looking work BTW.

Below 30 degrees this morning. Why did you move? :D

[ctrlraven]

Thanks J-MAN! i dont think the MMR oil pan will clear the Kmember on our cars , im not 100% sure but it looks like it wouldnt clear from just looking at their oil pan.
Was it a direct bolt-on or did have to mod anything to make it work?

[MOTOWN]

Roger, what pan was it that you used that cleared? What's the status on you build? Great looking work BTW.

Below 30 degrees this morning. Why did you move? :D

Here a link to the oil pan thread, the build is pretty much done i just need exhaust and a tune at this point.

Its about 60* here! lol

LINKY! http://www.mercurymarauder.net/forums/showthread.php?t=79274

[ctrlraven]

Did you use the stock pickup or was a cobra one needed?

[MOTOWN]

Did you use the stock pickup or was a cobra one needed?

Stock pick up was used:banana2:, all you need is a wrench to bolt it on!

[ctrlraven]

Stock pick up was used:banana2:, all you need is a wrench to bolt it on!
Awesome, thanks!

[justbob]

That pan is sick.


Self proclaimed Builder Of Badassery.

[babbage]

I want one of those.... Birdman that pan is for the stock stroke, is yours a stroker or just big bore?


copied the pic to this thread.
http://i1020.photobucket.com/albums/af324/sims36/mailmm.jpg

[ctrlraven]

My build is a big bore using stock crank specs.

[babbage]

My build is a big bore using stock crank specs.

Then you can run that pan, are you gonna get it?

[ctrlraven]

Then you can run that pan, are you gonna get it?
Don't know yet. I already have a FRPP cobra oil pump, cobra pickup and cobra oil pan for my build. I wouldn't mind having a windage tray though but I've heard some modding is needed for clearance.

[babbage]

So the cobra pan will fit the MM with the K member and all? Nice parts list you got going..

[DTUB]

So the cobra pan will fit the MM with the K member and all? Nice parts list you got going..

The Cobra pan will hit the back of the crossmember and so will the MMR 7 quart because they modify a Cobra pan for the extra capacity.

[ctrlraven]

The Cobra pan will hit the back of the crossmember and so will the MMR 7 quart because they modify a Cobra pan for the extra capacity.
If that's the case, I guess I will just swap over my stock pan or get another MM pan and pickup.

[MOTOWN]

If that's the case, I guess I will just swap over my stock pan or get another MM pan and pickup.

With that Monster big bore your building get the "Moroso7qt pan" i think the price has dropped!

[ctrlraven]

With that Monster big bore your building get the "Moroso7qt pan" i think the price has dropped!
Not the monster big bore I wanted (Big Bore Stroker 327ci) just a 5.1L 306ci. A wise Marauder knowledge expert told me I don't need it unless I plan on revving it to 7k rpms or doing road racing/auto crossing.

Money saved from not having to get a larger oil pan can be put towards other better parts for the motor.